Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year to: 08.1998
- Fitting Position: Rear
-
for OE number: 89465-
19605, 8946519605 -
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: Flange 44
- Cable Length [mm]: 840
- Number of pins: 4
- Weight [g]: 156
- Gross Weight [g]: 196
-
Name: DN DOX-
0228 - Manufacturer: DENSO
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
Additional information: "Tootja: DENSO
RAV 4 I (SXA1/), 01.
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
RAV 4 I (SXA1/), 01.
(kvaliteediklass: Q)"
- Sensor Type: NTC Sensor
- Number of pins: 2
- Manufacturer: ERA
-
Engine Code: 2JZ-
GTE - Number of pins: 2
- Manufacturer: KAVO
-
for OE number: 89424-
87703- 000 - Colour: black
- Sensor Type: NTC Sensor
- Number of pins: 2
- Connector Shape: oval
-
Fabrication Number: ECT-
MZ- 000 -
Name: NTY ECT-
MZ- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Engine Code: 2JZ-
GTE - Country Specific Design: Europe
-
Thread Size: 1/
8 GAS - Spanner Size: 13
- Corresponds to the original part in colour: black
- Name: EP 1.830.184
- Manufacturer: EPS
-
Engine Code: 2JZ-
GTE -
Thread Size: M16x1,
5 - Spanner Size: 17
- Corresponds to the original part in colour: black
- Name: EP 1.830.161
- Manufacturer: EPS
-
Engine Code: 2JZ-
GTE -
Thread Size: M12x1,
5 - Spanner Size: 19
- Corresponds to the original part in colour: green
-
for article number: 1.880.606,
1.880.732, 1.880.733 - Name: EP 1.830.177
- Manufacturer: EPS
- Number of pins: 2
- Connector Shape: oval
- Colour: black
- Mounting Type: Pressed
- Sensor Type: NTC Sensor
-
for OE number: 89424-
87703- 000 - Manufacturer: MEAT&DORIA
Manufacturer: MAGNETI MARELLI
- Number of pins: 2
- Housing Colour: green
-
Thread Size: M 12x1,
5 - Manufacturer: FAE
- Manufacturer: FAE
- Additional information: 33235 NRF
- Lisainfo: 33235 NRF
-
Engine Code: 2JZ-
GTE - Supplementary Article/Info 2: without fastening clamp
- Name: EP 1.994.010
- Manufacturer: EPS
-
Lambda Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Weight [kg]: 0.044
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Lambda Sensor: Lambda Sensor
- Voltage [V]: 12
- Number of circuits: 4
- Weight [kg]: 0.09
- Resistor [Ohm]: 13
- Operating Mode: Electric
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 09SKV913
-
Lambda Sensor: Regulating Probe,
Thread pre- greased -
Fabrication Number: ESL-
TY- 028 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Construction Year to: 08.1998
- Required quantity: 2
- Number of pins: 2
- Weight [g]: 41
- Country Specific Design: Japan
- not for country specific design: Japan
- Gross Weight [g]: 68
- Manufacturer: DENSO
- Name: DN DCPS0101
- Construction Year to: 08.1998
- Fitting Position: Rear
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Thread Size: Flange 44
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 145
- Gross Weight [g]: 216
- Manufacturer: DENSO
-
Name: DN DOX-
0110 - Quality class: Q
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
Additional information: "Tootja: DENSO
PREVIA (TCR2/, TCR1/
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
PREVIA (TCR2/, TCR1/
(kvaliteediklass: Q)"
- Construction Year from: 09.1993
- Construction Year to: 07.1996
- Fitting Position: after catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Lambda Sensor: Planar probe,
Heated, Thread pre- greased - Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 01.1996
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 250,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: BOSCH