• Outer Diameter [mm]: 62
• Width [mm]: 30.6
• Lisainfo: TOYOTA
• Additional information: TOYOTA

• Filter type: Spin-on Filter
• Height [mm]: 140
• Outer Diameter [mm]: 91
• Inner Diameter 1 [mm]: 63
• Inner Diameter 2 [mm]: 71
• Manufacturer: JP GROUP
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Filter type: Spin-on Filter
• Height [mm]: 142
• Outer Diameter [mm]: 93
• Thread Size: 3/4-16UNF
• Name: KšTUSEFILTER
• Manufacturer: ALC

• Fitting Position: Front Axle
• Brake System: Sumitomo
• Height [mm]: 53
• Width [mm]: 133
• Thickness [mm]: 17.6
• Wear Warning Contact: with acoustic wear warning
• Lisainfo: Brake Pad Set, disc brake
• Additional information: Brake Pad Set, disc brake

• Filter type: Spin-on Filter, with water sensor
• Length [mm]: 140
• Outer Diameter [mm]: 93.6
• Fitted Diameter [mm]: 64
• Internal Thread [mm]: IN: 3/4 X 16 / OUT:3
• Manufacturer: ASHIKA

• Filter type: Spin-on Filter, with water sensor
• Length [mm]: 140
• Outer Diameter [mm]: 93.6
• Fitted Diameter [mm]: 64
• Internal Thread [mm]: IN: 3/4 X 16 / OUT:3
• Manufacturer: JAPKO
• Lisainfo: 30215 JAPKO
• Additional information: 30215 JAPKO

• Outer Diameter 1 [mm]: 56
• Thread Size 1: 3/4"-16 UNF
• Height [mm]: 141
• Filter type: In-Line Filter
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Spin-on Filter
• Outer Diameter 1 [mm]: 93
• Thread Size Exit: 3/4" 16 UNF
• Height [mm]: 132
• Diameter [mm]: 88
• Name: KšTUSEFILTER
• Manufacturer: MAX

• Filter type: Spin-on Filter
• Fuel Type: Diesel
• Height [mm]: 137
• Outer Diameter [mm]: 94
• for OE number: 186100-5420
• Manufacturer: KAMOKA FILTRY PALIWA

• Filter type: Spin-on Filter, with water sensor
• Length [mm]: 140
• Outer Diameter [mm]: 93.6
• Fitted Diameter [mm]: 64
• Internal Thread [mm]: IN: 3/4 X 16 / OUT:3
• Name: KšTUSEFILTER
• Manufacturer: JPA
• Additional information: FC-215S JP
• Lisainfo: FC-215S JP

• Filter type: Spin-on Filter
• Height [mm]: 130
• Outer Diameter [mm]: 94
• Internal Thread Size: 3/4" - 16 UNF
• Seal Diameter [mm]: 4
• Weight [kg]: 0.46
• Supplementary Article/Info 2: with seal ring
• Name: KšTUSEFILTER
• Manufacturer: BLP
• Additional information: ADM52342
• Lisainfo: ADM52342

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Height [mm]: 141
• Outer Diameter [mm]: 90
• Outer Diameter 1 [mm]: 94
• Outer Diameter 2 [mm]: 63
• Inner Diameter [mm]: 56
• Thread Size 1: 3/4-16 UNF
• Thread Size 2: M 36 X 1,5
• Filter type: Filter Insert
• Manufacturer: SOFIMA

• Filter type: Spin-on Filter
• Diameter [mm]: 88.2
• Outer Diameter 1 [mm]: 93
• Height [mm]: 131.5
• Thread Size Exit: 3/4" 16 UNF
• Name: KšTUSEFILTER
• Manufacturer: BOS

• Diameter [mm]: 95
• Material: Plastic
• Filter type: Spin-on Filter
• Height [mm]: 140
• Manufacturer: DELPHI

• Filter type: Spin-on Filter
• Height [mm]: 141
• Outer Diameter [mm]: 94
• Inner Diameter 1 [mm]: 63
• Inner Diameter 2 [mm]: 55
• Thread Size Entry: M 36x1,5
• Thread Size Exit: UNF 3/4"-16
• Weight [kg]: 0.581
• Manufacturer: VALEO
• Name: VA 587709

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 200
• Width [mm]: 37
• Brake System: SUMITOMO
• Manufacturer: LPR

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 133
• Height [mm]: 52.7
• Thickness [mm]: 17.4
• WVA Number: 21601
• Test Mark: ECE R90 APPROVED
• Manufacturer: ASHIKA
• Lisainfo: 50-02-264
• Additional information: 50-02-264

• Fitting Position: Rear Axle
• Width [mm]: 37
• Supplementary Article/Supplementary Info: without spring
• Inner brake drum diameter [mm]: 200
• Name: Piduriklotside komplekt
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Brake System: SUMITOMO
• Inner brake drum diameter [mm]: 200
• Width [mm]: 37
• Manufacturer: LPR

• Fitting Position: Front Axle
• Height [mm]: 47.3
• Thickness [mm]: 15
• Wear Warning Contact: prepared for wear indicator
• Brake System: Akebono
• Width [mm]: 120
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Width [mm]: 36
• Inner brake drum diameter [mm]: 200
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: MAX

• Filter type: Spin-on Filter
• Outer Diameter [mm]: 86
• Seal Diameter [mm]: 63
• Thread Size: 3/4-16 UNF
• Height [mm]: 139
• Manufacturer: HENGST FILTER

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 200
• Width [mm]: 36
• Weight [kg]: 1.02
• Brake System: SUMITOMO
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Width [mm]: 36
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Sumitomo
• Inner brake drum diameter [mm]: 200
• Manufacturer: BREMBO
• Name: BR S 83 503

• Fitting Position: Front Axle
• Manufacturer Restriction: Akebono
• Thickness [mm]: 17.5
• Test Mark: R90
• Width [mm]: 133
• Height [mm]: 52.9
• Wear Warning Contact: with acoustic wear warning
• Manufacturer: KAVO

• Fitting Position: Rear Axle
• Brake System: Sumitomo
• Inner brake drum diameter [mm]: 200
• Width [mm]: 37
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Fitting Position: Front Axle
• Thickness [mm]: 17.5
• Width [mm]: 133.2
• Number of wear indicators [per axle]: 2
• Brake System: AKEBONO
• Height [mm]: 53
• Manufacturer: LPR

• Filter type: Spin-on Filter
• Diameter [mm]: 86.5
• Height [mm]: 138.7
• Thread Size: 3/4"-16UNF-2B
• Diameter 2 [mm]: 62.5
• Seal Diameter [mm]: 56.5
• Tightening Torque [Nm]: 14
• Packaging length [cm]: 10
• Packaging width [cm]: 10
• Packaging height [cm]: 14.6
• Net Weight [g]: 403
• Name: KN KC83D
• Manufacturer: KNECHT

• Fitting Position: Rear Axle
• Alternatively:
• Brake System: Sumitomo
• Inner brake drum diameter [mm]: 200
• Width [mm]: 37
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Alternatively:
• Fitting Position: Rear Axle
• Diameter [mm]: 200
• Width [mm]: 37
• Brake System: Sumitomo
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 200
• Width [mm]: 36
• Brake Pad: with lining
• Manufacturer: BOSCH

• Alternatively:
• Fitting Position: Rear Axle
• Diameter [mm]: 200
• Width [mm]: 37
• Brake System: Sumitomo
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 133
• Height [mm]: 52.7
• Thickness [mm]: 17.4
• WVA Number: 21601
• Test Mark: ECE R90 APPROVED
• Manufacturer: JAPKO

• Filter type: Spin-on Filter
• Height [mm]: 145
• Thread Size: 3/4-16 UNF
• Outer Diameter 1 [mm]: 95
• Thread Size 1: M36x1.5
• Inner Diameter 1 [mm]: 66
• Inner Diameter 2 [mm]: 58
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Fitting Position: Front Axle
• Country Specific Design: Russia
• Construction Year from: 06.1995
• Width 1 [mm]: 120
• Height 1 [mm]: 47.5
• Thickness 1 [mm]: 15
• Brake System: AKEBONO
• Wear Warning Contact: with acoustic wear warning
• Weight [kg]: 1.02
• Number of wear indicators [per axle]: 4
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Diameter [mm]: 200
• Width [mm]: 37
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle
• Diameter [mm]: 200
• Width [mm]: 37
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Brake System: NBK
• Inner brake drum diameter [mm]: 200
• Width [mm]: 37
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Fitting Position: Front Axle
• Width [mm]: 133
• Height [mm]: 53
• Thickness [mm]: 17.5
• Wear Warning Contact: with acoustic wear warning
• Brake System: Sumitomo
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Width [mm]: 133
• Height [mm]: 53
• Thickness [mm]: 17.5
• Wear Warning Contact: with acoustic wear warning
• Brake System: Sumitomo
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Width [mm]: 37
• Brake System: SUMITOMO
• Inner brake drum diameter [mm]: 200
• Weight [kg]: 1.1
• Manufacturer: TOMEX BRAKES

• Length [mm]: 133
• Width [mm]: 53
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 18
• Wear Warning Contact: with acoustic wear warning
• Weight [kg]: 1.44
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BLP
• Additional information: ADT34285
• Lisainfo: ADT34285

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 17.5
• Length [mm]: 133.2
• Height [mm]: 53
• Fitting Position: Front Axle
• Manufacturer: DJ PARTS

• Height [mm]: 52.8
• Thickness [mm]: 17.6
• Wear Warning Contact: with acoustic wear warning
• Brake System: Sumitomo
• Fitting Position: Front Axle
• Width [mm]: 133
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Width [mm]: 37
• Outer Diameter [mm]: 200
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 4
• Weight [kg]: 1.11
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Outer Diameter [mm]: 94
• Thread Size: 3/4"-16
• Height [mm]: 124
• Name: Fuel filter
• Quality class: PJ

Lisainfo: "Tootja: COOPERSFIAAM FILTERS
COROLLA (/E11/), 04.
(kvaliteediklass: PJ)" Additional information: "Tootja: COOPERSFIAAM FILTERS
COROLLA (/E11/), 04.
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 200
• Width [mm]: 37
• Supplementary Article/Supplementary Info: without lever
• Lisainfo: Brake Shoe Set
• Additional information: Brake Shoe Set

• Fitting Position: Front Axle
• Brake System: AKEBONO
• Width [mm]: 133
• Height [mm]: 52.8
• Thickness [mm]: 17.5
• WVA Number: 21601
• Wear Warning Contact: incl. wear warning contact
• Number of wear indicators [per axle]: 2
• Operating Mode: Mechanical
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.46
• Manufacturer: VALEO
• Name: VA 301551

• Fitting Position: Front Axle
• Height 1 [mm]: 56.5
• Thickness 1 [mm]: 15.5
• Wear Warning Contact: with acoustic wear warning
• Brake System: AKEBONO
• Width 1 [mm]: 141
• Width [mm]: 141
• Thickness [mm]: 16
• Height [mm]: 55.5
• Manufacturer: ACKOJA

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Height [mm]: 52.7
• Thickness [mm]: 17.4
• Width [mm]: 133
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: MAX

• Length [mm]: 133.2
• Width [mm]: 53
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17.5
• Wear Warning Contact: with acoustic wear warning
• Weight [kg]: 1.44
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of Teeth: 177
• Length [mm]: 1,686
• Width [mm]: 25
• Tooth Pitch [mm]: 9.525
• Manufacturer: BOSCH
• Name: BS 1987949116

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 200
• Width [mm]: 37
• Supplementary Article/Supplementary Info: without lever
• Lisainfo: Brake Shoe Set
• Additional information: Brake Shoe Set

• Width of castor bearing surface [mm]: 28.5
• Width [mm]: 30.5
• Outer Diameter [mm]: 62
• Material: Metal
• Weight [kg]: 0.3
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• FMSI Code: D562-7441 D695-7441
• Test Mark: E1 90R-01881/996
• WVA Number: 21601 21602 21603
• Brake System: Akebono
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: with acoustic wear warning
• Width 1 [mm]: 133
• Width 2 [mm]: 132.8
• Height 1 [mm]: 52.9
• Height 2 [mm]: 52.9
• Thickness 1 [mm]: 17.5
• Thickness 2 [mm]: 17.5
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP789

• Fitting Position: Front Axle
• Width [mm]: 133.2
• Height [mm]: 52.8
• Thickness [mm]: 17.6
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: with acoustic wear warning
• Brake System: Akebono
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Engine Code: 2C
• Height [mm]: 145
• Fuel Type: Diesel
• Filter type: Filter Insert
• Outer Diameter [mm]: 95
• Thread Size: UNF 3/4"-16
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Rear Axle
• Manufacturer Restriction: SUMITOMO
• Test Mark: E1 90R 01195/008
• Inner brake drum diameter [mm]: 200
• Width [mm]: 37
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Width 1 [mm]: 41
• Outer Diameter 1 [mm]: 41
• Manufacturer: SNR /NTN-SNR/
• Name: SN GT369.00

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 200
• Width [mm]: 37
• Test Mark: E1 90R-011043/187
• MAPP code available:
• Article number of recommended accessories: 03.0137-9114.2
• Observe dimensions:
• Name: Piduriklotside komplekt
• Manufacturer: ATE

• Driven Units: Camshaft
• Trim Level: HSN
• Number of Teeth: 177
• Width [mm]: 25.4
• Manufacturer: DAYCO
• Name: DA 94524
• Lisainfo: 94524 NIS
• Additional information: 94524 NIS

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 200
• Width [mm]: 36
• Supplementary Article/Info 2: without handbrake lever
• Packaging length [cm]: 19.8
• Packaging width [cm]: 12.5
• Packaging height [cm]: 8.2
• Weight [kg]: 1
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: TEX

• Filter type: Spin-on Filter
• Supplementary Article/Supplementary Info: with seal
• Gasket inner diameter: 63
• Seal Ring Outer Diameter: 71
• Height [mm]: 140
• Outer Diameter [mm]: 91
• Thread Size Entry: M36x1.5
• Thread Size Exit: 3/4-16 UNF
• SVHC: No SVHC present!
• Name: KšTUSEFILTER
• Manufacturer: MAN

• Width [mm]: 25
• Number of Teeth: 177
• Surface: PTFE (Polytetrafluorethylene) coated
• Belts: with trapezoidal tooth profile
• Weight [kg]: 0.282
• Name: HAMMASRIHM
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Width [mm]: 133
• Height [mm]: 53
• Thickness [mm]: 17.5
• Wear Warning Contact: with acoustic wear warning
• Brake System: Sumitomo
• Test Mark: E9 90R-01247/977
• MAPP code available:
• Article number of recommended accessories: 13.0460-0074.2, 13.0460-0441.2
• Observe dimensions:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE

• Fitting Position: Front Axle
• Width [mm]: 119.8
• Height [mm]: 47.6
• Thickness [mm]: 15
• Brake System: Akebono
• Test Mark: E9 90R-01247/057
• MAPP code available:
• Article number of recommended accessories: 13.0460-0325.2
• Observe dimensions:
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: ATE

Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact

• Fitting Position: Front Axle
• Width [mm]: 133.2
• Height [mm]: 52.8
• Thickness [mm]: 17.6
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 21601
• Brake System: Sumitomo
• Article number of recommended accessories: MBA1289
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Weight [kg]: 1.4
• Manufacturer: MINTEX

• Weight [kg]: 0.404
• Inner Diameter [mm]: 24
• Packaging length [cm]: 8.8
• Packaging width [cm]: 4.1
• Packaging height [cm]: 4.1
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Thickness [mm]: 17.5
• Length [mm]: 133.2
• Height [mm]: 53
• Wear Warning Contact: incl. wear warning contact
• Brake System: Akebono
• Manufacturer: DRIVE

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Manufacturer Restriction: AKEBONO
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 21601
• Test Mark: E1 90R-01811/065
• Length [mm]: 132.8
• Thickness [mm]: 17.6
• Height [mm]: 52.9
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Fitting Position: Front Axle
• Manufacturer Restriction: AKEBONO
• Wear Warning Contact: with acoustic wear warning
• Test Mark: E1 90R 01024/258
• Height [mm]: 53
• Width [mm]: 133.2
• Thickness [mm]: 17.5
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Outer Diameter [mm]: 62
• Width [mm]: 30.6
• SVHC: No SVHC present!
• Manufacturer: INA

• Fitting Position: Front Axle
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Info 2: with mounting manual
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21602
• Thickness [mm]: 17.5
• Width [mm]: 133.2
• Height [mm]: 53
• Manufacturer Restriction: SUMITOMO System
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

• Fitting Position: Front Axle
• Width [mm]: 133.2
• Height [mm]: 52.8
• Thickness [mm]: 17.6
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 21601
• Brake System: Sumitomo
• Article number of recommended accessories: 82519300
• Observe mounting information:
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Weight [kg]: 1.4
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 200
• Width [mm]: 30
• Thickness [mm]: 4
• Article number of recommended accessories: 105-0637
• Manufacturer: METZGER

• Driven Units: Camshaft
• Number of Teeth: 177
• Width [mm]: 25
• Length [mm]: 1,687
• Belts: with rounded tooth profile
• Manufacturer: JAPKO

• for model code: CE100
• Diameter [mm]: 62
• Width [mm]: 26
• Tensioner Pulley Actuation: Manual
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: SKF

• Fitting Position: Front Axle
• Width [mm]: 133
• Thickness [mm]: 18
• Height [mm]: 53
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Sumitomo
• Number of wear indicators [per axle]: 2
• WVA Number: 21601, 21602, 21603
• Manufacturer: BREMBO
• Name: BR P 83 034

• Construction Year from: 07.1992
• Driven Units: Camshaft
• Article number of the recommended special tool: STT-1
• Tensile Cord Material: Fiberglass
• Belt Material: HNBR (hydrogenated nitrile butadiene rubber)
• Colour: black
• Number of Teeth: 177
• Width [mm]: 25.4
• Tooth Pitch [mm]: 9.525
• Length [mm]: 1,686
• Manufacturer: GATES

• Driven Units: Camshaft
• Number of Teeth: 177
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.28
• Width [mm]: 25
• Tooth Pitch [mm]: 9.525
• Name: HAMMASRIHM
• Manufacturer: CON

• Fitting Position: Front Axle
• Construction Year to: 08.1995
• Brake System: AKEBONO
• Width [mm]: 133
• Height [mm]: 53
• Thickness [mm]: 18
• Wear Warning Contact: with acoustic wear warning
• Number of wear indicators [per axle]: 2
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Number of Teeth 1: 177
• Width 1 [mm]: 25
• Manufacturer: JAPKO

• Number of belts: 1
• Width 1 [mm]: 25
• Number of track rollers: 2
• Number of Teeth 1: 177
• Manufacturer: SNR
• Name: SN KD469.02

• Number of Teeth 1: 177
• Width 1 [mm]: 25.4
• Observe service information:
• SVHC: No SVHC present!
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: INA

• for model code: CE100
• Belt Width [mm]: 25.4
• Number of Teeth: 177
• Belts: with rounded tooth profile
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: SKF

• Width [mm]: 25.4
• Number of Teeth: 177
• Belts: with trapezoidal tooth profile
• Weight [kg]: 0.66
• Units/Pulleys: incl. tensioner pulley, incl. deflection pulley
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 07.1992
• Driven Units: Camshaft
• Article number of the recommended special tool: STT-1
• Manufacturer: GATES

• Driven Units: Camshaft
• Packaging length [cm]: 26.5
• Packaging width [cm]: 16.5
• Packaging height [cm]: 9.5
• Weight [kg]: 0.95
• Number of Teeth: 177
• Width [mm]: 25
• Manufacturer: CONTINENTAL CTAM

• Driven Units: Camshaft
• Trim Level: KTBWP
• Number of Teeth: 177
• Width [mm]: 25
• Length [mm]: 1,686
• Number of belts: 1
• Pulleys contained: 2
• Weight [kg]: 2.6
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: DAY