• Length [mm]: 275
• Fabrication Number: ESL-TY-008
• Manufacturer: NTY

Fitting Position: Front, Left Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Construction Year to: 12.2002
• for OE number: 89465-52060, 89465-52120, 8946552060
• Vehicle Production Country: Japan
• Quality: OE
• Manufacturer Restriction: DENSO
• Connector type: with rubber grommet
• Thread Size: M18x1.5
• Cable Length [mm]: 490
• Number of pins: 4
• Weight [g]: 101
• Gross Weight [g]: 134
• Name: DN DOX-0276
• Manufacturer: DENSO

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
YARIS VERSO (NC/LP2/
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
YARIS VERSO (NC/LP2/
(kvaliteediklass: Q)"

• Fitting Depth [mm]: 28
• Housing Colour: grey
• Manufacturer: KAMOKA

• Fabrication Number: ECC-TY-000
• Spanner Size: 24
• Socket colour: black
• Number of pins: 1
• Manufacturer: NTY

• Fabrication Number: ECT-TY-004
• Name: NTY ECT-TY-004
• Manufacturer: NTY

• Engine Code: 2NZ-FE
• Manufacturer Restriction: TOKAIRIKA
• Colour: black
• Pressure [bar]: 0
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Name: EP 1.800.114
• Manufacturer: EPS

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: triangular
• Number of pins: 3
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 94856779
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Spanner Size: 24
• Number of connectors: 1
• Shifting Points [bar]: 0.2
• Weight [kg]: 0.04
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Switch Pressure [bar]: 0.2
• Thread Size: 1/8x28 BSPT
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET
• Additional information: OS3557
• Lisainfo: OS3557

• Construction Year to: 12.2002
• Manufacturer Restriction: NIPPONDENSO
• Manufacturer: BOSCH

• Pressure [bar]: 0.2
• Thread Size: 1/8 GAS
• Number of pins: 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Pressure [bar]: 2
• Housing Colour: grey
• Thread Size: R1/8
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: DELPHI
• Name: DE SW90001

• Fabrication Number: ECP-TY-003
• Manufacturer: NTY

• Voltage [V]: 12
• Pressure [bar]: 0.2
• Combi Switch Function: Normally Closed Contact
• Thread Size: 1/8 GAS
• Colour: black
• Spanner Size: 24
• Number of pins: 1
• Assy./disassy. by qualified personnel required!:
• Name: HE 6ZL003259511
• Manufacturer: HELLA

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Number of pins: 2
• Supplementary Article/Info 2: without cable

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE SS10938

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Supplementary Article/Info 2: for crankshaft
• Required quantity: 1
• Number of pins: 2
• Number of connectors: 2
• Rated Voltage [V]: 12
• Housing Colour: black
• Weight [kg]: 0.057
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE SS11477

• Thread Size: M18x1.5
• Cable Length [mm]: 490
• Number of pins: 4
• Lambda Sensor: Thread pre-greased
• Fabrication Number: ESL-TY-040
• Manufacturer: NTY

• Number of connectors: 3
• Colour: grey
• Weight [kg]: 0.025
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 2NZ-FE
• Manufacturer Restriction: ZEM
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: EP 1.830.368
• Manufacturer: EPS

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Length [mm]: 93
• Number of connectors: 2
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Housing Type: without housing
• Fabrication Number: EPP-TY-000
• Manufacturer: NTY

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of connectors: 3
• Colour: grey
• Weight [kg]: 0.025
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 58.1
• Number of connectors: 2
• Weight [kg]: 0.04
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 2
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Construction Year to: 12.2002
• Vehicle Production Country: Japan
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 32.5
• Alternative Repair Kit: 551179
• Manufacturer: ERA

• Length [mm]: 93
• Number of connectors: 2
• Weight [kg]: 0.08
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Number of pins: 2

• Construction Year to: 12.2002
• Required quantity: 1
• Vehicle Production Country: Japan
• Number of pins: 2
• Weight [g]: 33
• Country Specific Design: Japan
• not for country specific design: Japan
• Gross Weight [g]: 60
• Manufacturer: DENSO
• Name: DN DCPS0107

• Construction Year to: 08.2002
• Line insulation design: with silicone-coated woven-fibre insulation
• Socket colour: grey
• for OE number: 89465 0D040
• Length [mm]: 580
• Weight [kg]: 0.117
• Thread Size: M18 x 1,5
• Connector Shape: angular
• Number of circuits: 4
• Cable Length [mm]: 350
• Number of pins: 4
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Exhaust System: before catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV913
• Manufacturer: ESEN SKV

• Engine Code: 2NZ-FE
• Name: EP 1.953.478
• Manufacturer: EPS

• Engine Code: 2NZ-FE
• Lambda Sensor: Regulating Probe
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Number of pins: 5
• Housing Type: without housing
• Manufacturer: JP GROUP
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Construction Year to: 12.2002
• Vehicle Production Country: Japan
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Lisainfo: DOX-0109 DENSO
• Additional information: DOX-0109 DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor

• Vehicle type: Yaris
• Required quantity: 1
• Supplementary Article/Supplementary Info: without suction pipe
• Number of pins: 5
• Quality class: PJ
• Name: Air flow sensor

• Construction Year to: 12.2002
• Lambda Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 410
• Weight [kg]: 0.092
• Name: SW 33 10 6784
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Construction Year to: 12.2002
• Engine Code: 2NZ-FE
• Voltage [V]: 12
• Length [mm]: 392
• Number of circuits: 4
• Weight [kg]: 0.13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV011
• Manufacturer: ESEN SKV

• Lambda Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 500
• Fitting Position: Exhaust Manifold
• Manufacturer: MEAT&DORIA

• Exhaust System: for pre-catalytic converter
• Block Separation:
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 369
• Manufacturer: DELPHI
• Name: DE ES20118-12B1

• Construction Year to: 12.2002
• Vehicle Production Country: Japan
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 2,250
• Weight [kg]: 0.04
• Manufacturer: VALEO
• Name: VA 253842

• Construction Year to: 11.2002
• Lambda Sensor: Regulating Probe, Finger probe, Thread pre-greased
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 570
• Number of pins: 4
• Weight [kg]: 0.174
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Housing Colour: black
• Supplementary Article/Info 2: without cable
• Sensor Type: Inductive Sensor
• Manufacturer: FAE

• Construction Year from: 05.2002
• Engine Code: 2SZ-FE
• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10172

• Engine Code: 2NZ-FE
• Required quantity: 1
• Manufacturer: FACET
• Name: EP 1.953.477

• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Construction Year to: 12.2002
• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 410
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV583

• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.07
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV103

• Number of pins: 1
• Connecting thread: M12x1.25
• Manufacturer: ERA

• Construction Year from: 01.2000
• Construction Year to: 01.2003
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 2NZ-FE
• Number of pins: 2
• Manufacturer: FAE

• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV151

• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year to: 12.2002
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

Fitting Position: before catalytic converter, after catalytic converter

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Weight [kg]: 0.12
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV112

• Construction Year to: 12.2002
• for OE number: 89465-52050, 8946505100
• Vehicle Production Country: Japan
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 360
• Number of pins: 4
• Weight [g]: 94
• Gross Weight [g]: 127
• Manufacturer: DENSO
• Name: DN DOX-0204

Lambda Sensor: Regulating Probe, Heated, Finger probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
CARINA E SEDAN (/T19
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
CARINA E SEDAN (/T19
(kvaliteediklass: Q)"

• Required quantity: 1
• Vehicle type: Yaris
• Mounting Type: Bolted
• Number of pins: 5
• Manufacturer Restriction: 8ET 009 142- 901
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 2NZ-FE
• Required quantity: 1
• Housing Type: without housing
• Name: EP 1.991.163
• Manufacturer: EPS

• Construction Year to: 12.2002
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 565
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Alternatively:
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• Number of connectors: 3
• Weight [kg]: 0.06
• for OE number: 89452-20130
• Observe service information:
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10135-12B1

• Voltage [V]: 12
• Housing Type: without housing
• Number of pins: 5
• Supplementary Article/Info 2: with seal ring
• Number of Holes: 2
• Manufacturer: ERA

• for OE number: 22204-22010
• Quality: OE
• Operating Mode: Electric
• Number of pins: 5
• Gross Weight [g]: 79
• Manufacturer: DENSO
• Name: DN DMA-0108

Additional information: "Tootja: DENSO
FORTUNER SAMOCHÓD TE
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
FORTUNER SAMOCHÓD TE
(kvaliteediklass: Q)"

• Resistor Type: Hot-wire Sensor
• Number of connectors: 5
• Colour: black
• Material: Plastic
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.051
• Housing Type: without housing
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 2NZ-FE
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG