Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Manufacturer: JP GROUP
-
Lisainfo: Sender Unit,
coolant temperature -
Additional information: Sender Unit,
coolant temperature
- Construction Year from: 10.1988
-
for OE number: 89465-
39345, 8946519415 -
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: Flange 44
- Cable Length [mm]: 500
- Number of pins: 4
- Weight [g]: 160
- Gross Weight [g]: 200
- Manufacturer: DENSO
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
Additional information: "Tootja: DENSO
CAMRY (/V2/), 10.86-
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
CAMRY (/V2/), 10.86-
(kvaliteediklass: Q)"
- Spanner Size: 13
- for OE number: 8342087703
- Manufacturer: KAMOKA
-
Engine Code: 3S-
FE - Pressure [bar]: 0
-
Thread Size: 1/
8 GAS - Spanner Size: 24
- Name: OLISURVELLITUS
- Manufacturer: EPS
- Number of pins: 1
- Plug Type: Blade Terminal
- Colour: black
- Pressure from [bar]: 0.3
-
Thread Size: 1/
8"x28 BSP - Spanner Size: 24
- Manufacturer: MEAT&DORIA
- Switch Pressure [bar]: 0.3
-
Thread Size: 1/
8x28 BSPT -
Sensor Type: Closed-
type Sensor - Name: OLISURVELLITUS
- Manufacturer: VER
- Spanner Size: 13
- Material: Brass
- Number of pins: 1
-
Thread Size: 1/
8" - 28 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
-
Thread Size: 1/
8x28 BSP - Pressure [bar]: 0.35
- Manufacturer: FAE
- for OE number: MD 091056
- Number of pins: 1
- Weight [kg]: 0.02
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Pressure [bar]: 0.3
-
Thread Size: 1/
8 GAS - Spanner Size: 27
- Technical Information Number: circuit N.C.
- Manufacturer: ERA
-
External Thread Size: 1/
8" - 28 - Spanner Size: 13
- Number of connectors: 1
- Material: Brass
- Weight [kg]: 0.01
- Manufacturer: SWAG
- Name: SW 81 92 8265
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
External Thread Size: 1/
8" - 28 - Spanner Size: 13
- Number of connectors: 1
- Material: Brass
- Weight [kg]: 0.01
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: 3S-
FE - Length [mm]: 60
- Spanner Size: 19
- Colour: green
- Number of pins: 2
-
Thread Size: M12x1,
5 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- Plug Type: Blade Terminal
- Manufacturer: BOSCH
- Number of pins: 1
- Switch pressure from [bar]: 0.2
- Switch pressure to [bar]: 0.4
-
Thread Size: 1/
8" BSPT - Colour: black
-
Supplementary Article/Supplementary Info: without gaskets/
seals - Manufacturer: METZGER
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: rectangular
- Number of pins: 2
- Spanner Size: 19
- Thread Size: M12x1.5
- for OE number: 8942212010
- Supplementary Article/Info 2: with seal ring
- Manufacturer: NRF
- Spanner Size: 19 mm
- Sensor Type: NTC Sensor
- Number of pins: 2
-
Connecting thread: M12 x 1,
5 - Manufacturer: ERA
- Number of pins: 1
-
Thread Size: M 16x1,
5 -
Corresponds to the original part in colour: red,
black - Manufacturer: METZGER
-
Engine Code: 3S-
FE -
Thread Size: M12x1,
5 - Spanner Size: 19
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Number of pins: 2
-
Thread Size: M 12x1,
5, M12x1, 5 - Supplementary Article/Supplementary Info: with seal
- Housing Colour: green
- Power [W]: 0.06
- Manufacturer: METZGER
-
Engine Code: 3S-
FE - Alternatively:
- Rotation Direction: Clockwise rotation
- Number of pins: 3
- Alternative Repair Kit: 550443
- Manufacturer: ERA
- Supplementary Article/Info 2: with plug
- Number of wires (repair kit, cable set): 2
- Manufacturer: ABA
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur
-
Engine Code: 3S-
FE - Cable Length [mm]: 360
- Alternatively:
- Number of pins: 2
- Alternative Repair Kit: 550442
- Fitting Depth [mm]: 36
- Resistor [kOhm]: 1.4
- Manufacturer: ERA
-
Engine Code: 3S-
FE - Number of pins: 2
- Housing Colour: grey
- Manufacturer: FAE
- Cable Length [mm]: 450
-
Lambda Sensor: Finger probe,
Unheated - Manufacturer: DELPHI
-
Lambda Sensor: Regulating Probe,
Finger probe, Unheated -
Engine Code: 3S-
FE, 2S- E/ 2S- EL - Cable Length [mm]: 505
-
Name: DE ES10226-
12B1 - Manufacturer: DELPHI
- Construction Year from: 10.1988
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Thread Size: Flange 44
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 145
- Gross Weight [g]: 199
- Manufacturer: DENSO
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
Additional information: "Tootja: DENSO
CARINA II SEDAN (/T1
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
CARINA II SEDAN (/T1
(kvaliteediklass: Q)"
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Connector Shape: oval
- Supplementary Article/Info 2: with cable
- Weight [kg]: 0.1
- Manufacturer: VALEO
- Lambda Sensor: Regulating Probe
-
Fitting Position: before catalytic converter,
Front - Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: BOSCH
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks