• for OE number: 89465-05190, 8946505190
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 290
• Number of pins: 4
• Weight [g]: 84
• Gross Weight [g]: 117
• Manufacturer: DENSO
• Name: DN DOX-0275

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
AVENSIS STATION WAGO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
AVENSIS STATION WAGO
(kvaliteediklass: Q)"

• Engine Code: 3ZZ-FE
• Housing Colour: green
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 1.880.113, 1.880.114, 1.880.149, 1.880.151
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Fabrication Number: ECP-TY-017
• Manufacturer: NTY

Manufacturer: MAGNETI MARELLI

• Number of pins: 2
• Housing Colour: green
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Fabrication Number: ESS-TY-001
• Manufacturer: NTY

• Number of pins: 2
• Sensor Type: Inductive Sensor
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. TOYOTA
• Manufacturer: BRM

• Number of pins: 2
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 17SKV253
• Manufacturer: ESEN SKV

• Number of pins: 2
• Manufacturer: ERA

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Thread Size: M18x1.5
• Cable Length [mm]: 435
• Number of pins: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-TY-018
• Manufacturer: NTY

• Number of pins: 2
• Sensor Type: Inductive Sensor
• Resistor [Ohm]: 1,100
• Supplementary Article/Info 2: without cable
• Manufacturer: MEAT&DORIA

• Fitting Position: Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fabrication Number: ESL-TY-019
• Manufacturer: NTY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Manufacturer: VALEO
• Name: VA 366136

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Housing Type: without housing
• Fabrication Number: EPP-TY-000
• Manufacturer: NTY

• Cable Length [mm]: 360
• Lambda Sensor: Heated, Thread pre-greased
• Number of circuits: 4
• Fabrication Number: ESL-TY-006
• Manufacturer: NTY

• Fitting Position: Upper
• Quantity: 1
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Component Number: 120-08-106
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.05
• Manufacturer: VALEO

• Number of connectors: 2
• Weight [kg]: 0.06
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Weight [kg]: 0.06
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 04.2006
• Lambda Sensor: Diagnostic Probe, Heated
• Number of circuits: 4
• Resistor [Ohm]: 13
• Conductor Number: 4
• Length [mm]: 370
• Cable Length [mm]: 370
• Manufacturer: MAGNETI MARELLI

• Engine Code: 3ZZ-FE, 3ZZFE
• Required quantity: 1
• Country Specific Design: Japan
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV913

• Lambda Sensor: Regulating Probe, Diagnostic Probe, Finger probe
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Fitting Position: before catalytic converter, after catalytic converter

• Required quantity: 1
• Number of pins: 2
• Weight [g]: 33
• Country Specific Design: Japan
• not for country specific design: Japan
• Gross Weight [g]: 60
• Manufacturer: DENSO
• Name: DN DCPS0116

• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Lisainfo: DOX-0109 DENSO
• Additional information: DOX-0109 DENSO

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor

• Required quantity: 1
• Supplementary Article/Supplementary Info: without suction pipe
• Number of pins: 5
• Quality class: PJ
• Name: Air flow sensor

• Fitting Position: Front, after catalytic converter
• Construction Year to: 04.2006
• Length [mm]: 400
• Thread Size: M18x1.5-6e
• Number of pins: 4
• Lambda Sensor: Heated, Planar probe
• Manufacturer: KAVO

• Fitting Position: Front, before catalytic converter
• Length [mm]: 480
• Thread Size: M18x1.5mm
• Number of pins: 4
• Lambda Sensor: Heated, Planar probe
• Manufacturer: KAVO

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 100
• Gross Weight [g]: 149
• Name: DN DOX-0106
• Manufacturer: DENSO
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Lambda Sensor Additional information: "Tootja: DENSO
AVENSIS STATION WAGO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
AVENSIS STATION WAGO
(kvaliteediklass: Q)"

• Resistor [Ohm]: 13
• Conductor Number: 4
• Length [mm]: 570
• Number of circuits: 4
• Cable Length [mm]: 570
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Number of pins: 2
• Resistor [Ohm]: 1,100
• Housing Colour: black
• Manufacturer: METZGER

• Number of pins: 5
• Fitting Position: Air Filter Housing
• Recommended additional repairs: Air Filter
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 04.2006
• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 370
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV749

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10172

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Block Separation:
• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 492
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Lambda Sensor: Diagnostic Probe
• Construction Year from: 05.2006
• Voltage [V]: 12
• Length [mm]: 575
• Number of circuits: 4
• Weight [kg]: 0.15
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV741

• Construction Year from: 05.2006
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Cable Length [mm]: 520
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: LAMBDA ANDUR
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 07SKV151

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Weight [kg]: 0.08
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV086

• Construction Year from: 05.2006
• Lambda Sensor: Diagnostic Probe, Finger probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 570
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Additional information: ES11106-12B1 DELPHI
• Lisainfo: ES11106-12B1 DELPHI

• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Weight [kg]: 0.06
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV114

• Alternatively:
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Number of pins: 2
• Housing Colour: black
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE

• Number of pins: 2
• Manufacturer: FAE

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Weight [kg]: 0.08
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV084
• Manufacturer: ESEN SKV

• for OE number: 89465-05090, 8946502080
• Quality: OE
• Manufacturer Restriction: DENSO
• Connector type: with rubber grommet
• Thread Size: M18x1.5
• Cable Length [mm]: 585
• Number of pins: 4
• Weight [g]: 101
• Gross Weight [g]: 134
• Manufacturer: DENSO
• Name: DN DOX-0240

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
AVENSIS STATION WAGO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
AVENSIS STATION WAGO
(kvaliteediklass: Q)"

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• for OE number: 89465-05080, 8946505080
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 435
• Number of pins: 4
• Weight [g]: 94
• Gross Weight [g]: 127
• Manufacturer: DENSO
• Name: DN DOX-0254
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
AVENSIS STATION WAGO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
AVENSIS STATION WAGO
(kvaliteediklass: Q)"

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 379
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: DLP

• Voltage [V]: 12
• Housing Type: without housing
• Number of pins: 5
• Supplementary Article/Info 2: with seal ring
• Number of Holes: 2
• Manufacturer: ERA

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 470
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 5
• Manufacturer Restriction: 8ET 009 142- 901
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for OE number: 22204-22010
• Quality: OE
• Operating Mode: Electric
• Number of pins: 5
• Gross Weight [g]: 79
• Manufacturer: DENSO
• Name: DN DMA-0108

Additional information: "Tootja: DENSO
FORTUNER SAMOCHÓD TE
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
FORTUNER SAMOCHÓD TE
(kvaliteediklass: Q)"

• Resistor Type: Hot-wire Sensor
• Number of connectors: 5
• Colour: black
• Material: Plastic
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.051
• Housing Type: without housing
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.