• Construction Year to: 12.2008
• for OE number: 89465-02140, 8946502140
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 480
• Number of pins: 4
• Weight [g]: 94
• Gross Weight [g]: 127
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
COROLLA KOMBI (/E12J
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
COROLLA KOMBI (/E12J
(kvaliteediklass: Q)"

• Length [mm]: 60
• Spanner Size: 19
• Manufacturer: KAMOKA

• Fabrication Number: ECT-TY-002
• Manufacturer: NTY
• Name: NTY ECT-TY-002

• Length [mm]: 60
• Spanner Size: 19
• Colour: green
• Number of pins: 2
• Thread Size: M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Number of pins: 2
• Sensor Type: NTC Sensor
• Colour Coding: green
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 195321101000
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: J8942220010
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: M12*1,5
• Name: NI 207056
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Spanner Size: 19 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connecting thread: M12 x 1,5
• Manufacturer: ERA

• Connector Shape: rectangular
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: M12*1,5
• Name: NI 207076
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 280
• Supplementary Article/Supplementary Info: with seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M12x1,5
• Colour: green
• Sensor Type: NTC Sensor
• Number of pins: 2
• Colour Coding: grey
• Corresponds to the original part in colour: green
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107481

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 4ZZ-FE
• Housing Colour: green
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 1.880.113, 1.880.114, 1.880.149, 1.880.151
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Length [mm]: 60
• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: green
• Weight [kg]: 0.06
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Colour: blue
• Housing Colour: blue
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10250

• Fabrication Number: ECP-TY-005
• Manufacturer: NTY

• Engine Code: 4ZZ-FE
• Sensor Type: NTC Sensor
• Thread Size: M12 x 1,5
• Spanner Size: 19
• Colour: blue
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Colour: green
• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Engine Code: 4ZZ-FE
• Alternatively:
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Weight [kg]: 0.024
• Alternative Repair Kit: 550144
• Manufacturer: ERA

• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Fitting Position: Front Axle Left
• Manufacturer: ASHIKA

• Fitting Position: Front Axle Left
• Manufacturer: JAPKO

• Overall Length [mm]: 1,091
• Fitting Position: Front Axle Right
• Fabrication Number: HCA-TY-079
• paired article number: HCA-TY-078
• Manufacturer: NTY

• Vehicle Identification Number (VIN): AHT
• Fitting Position: Front Axle Left
• Length [mm]: 108
• Number of pins: 2
• paired article number: 06SKV527
• Colour: black
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 06SKV526

Fabrication Number: ECM-TY-003

• Length [mm]: 60
• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: green
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Cable Length [mm]: 385
• Number of pins: 2
• Name: DE SS12306-12B1
• Manufacturer: DELPHI

• Fitting Position: Front Axle Left
• Fabrication Number: HCA-TY-019
• paired article number: HCA-TY-020

• Fitting Position: Front Axle Right
• Fabrication Number: HCA-TY-020
• paired article number: HCA-TY-019
• Manufacturer: NTY

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN): AHT
• paired article number: 184996
• Number of connectors: 2
• Fitting Position: Front Axle Right
• Cable Length [mm]: 1,080
• Weight [kg]: 0.111
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right
• Manufacturer: ASHIKA

• Fitting Position: Front Axle Left
• Manufacturer: ASHIKA

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Manufacturer: BRM

Name: CZUJNIK POO½ENIA WAU KORB. TOYOTA AURIS 1,4 VVTI 07-

• Fitting Position: Front Axle Right
• Manufacturer: JAPKO

• Fitting Position: Front Axle Left
• Manufacturer: JAPKO

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Vehicle Identification Number (VIN): AHT
• paired article number: ADT37159
• Number of connectors: 2
• Fitting Position: Front Axle Right
• Cable Length [mm]: 1,080
• Weight [kg]: 0.111
• Name: Andur, rattap””rete arv
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right
• Manufacturer: ASHIKA

• Fitting Position: Front Axle Right
• Manufacturer: JAPKO

• Fitting Position: Front Axle Right
• Number of pins: 2
• Cable Length [mm]: 1,021
• Sensor Type: Active sensor
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0214

• Fitting Position: Front Axle Left
• Cable Length [mm]: 1,021
• Sensor Type: Active sensor
• Number of pins: 2
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0211

• Fitting Position: Front Axle Left
• Required quantity: 1
• Cable Length [mm]: 1,021
• Sensor Type: Hall Sensor
• Number of pins: 2
• Supplementary Article/Supplementary Info: with holder
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle Right
• Required quantity: 1
• Cable Length [mm]: 1,021
• Sensor Type: Hall Sensor
• Number of pins: 2
• Supplementary Article/Supplementary Info: with holder
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Fitting Position: Front Axle Right
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Number of pins: 2
• Cable Length [mm]: 461
• Fitting Depth [mm]: 30
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI

• Fitting Position: Front Axle Right
• Number of pins: 2
• Cable Length [mm]: 1,021
• Sensor Type: Active sensor
• Manufacturer: ERT

• Fitting Position: Front Axle Right
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Vehicle Identification Number (VIN): JT*
• paired article number: 106715
• Number of connectors: 2
• Fitting Position: Front Axle Left
• Cable Length [mm]: 1,044
• Weight [kg]: 0.1
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fabrication Number: ESL-TY-009
• Manufacturer: NTY

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Construction Year to: 02.2007
• Housing Type: without housing
• Fabrication Number: EPP-TY-007

• Construction Year from: 03.2007
• Housing Type: without housing
• Fabrication Number: EPP-TY-005
• Manufacturer: NTY

• Vehicle Identification Number (VIN): JT*
• paired article number: ADT37162
• Number of connectors: 2
• Fitting Position: Front Axle Left
• Cable Length [mm]: 1,044
• Weight [kg]: 0.1
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Construction Year to: 12.2008
• Engine Code: 4ZZFE-HTWC
• Manufacturer Restriction: DENSO, JAEGER
• Weight [kg]: 0.04
• Manufacturer: VALEO

• Construction Year to: 12.2008
• Engine Code: 4ZZFE-HTWC
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Connector Shape: oval
• Supplementary Article/Info 2: with cable
• Weight [kg]: 0.08
• Manufacturer: VALEO

• Cable Length [mm]: 400
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 30
• Total Length [mm]: 460
• Manufacturer: ERA

• Vehicle Identification Number (VIN): JT*
• paired article number: ADBP710067
• Number of connectors: 2
• Fitting Position: Front Axle Right
• Cable Length [mm]: 1,035
• Weight [kg]: 0.104
• Name: Andur, rattap””rete arv
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 4ZZ-FE
• Length [mm]: 225
• Name: EP 1.957.034
• Manufacturer: EPS

• Resistor [Ohm]: 9
• Length [mm]: 412
• Conductor Number: 4
• Number of circuits: 4
• Cable Length [mm]: 412
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Construction Year to: 12.2008
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Finger probe
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Fitting Position: before catalytic converter, after catalytic converter

• Vehicle Identification Number (VIN): AHT
• Fitting Position: Front Axle Left
• Cable Length [mm]: 1,035
• Sensor Type: Active sensor
• paired article number: 06-S646
• Manufacturer: OPTIMAL ZAWIESZENIE

• Construction Year to: 02.2007
• Required quantity: 1
• Supplementary Article/Supplementary Info: without suction pipe
• Number of pins: 5
• Quality class: PJ
• Name: Air flow sensor

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 420
• Name: DE ES20527-12B1
• Manufacturer: DELPHI

• Construction Year to: 02.2009
• Number of pins: 5
• Quality class: PJ
• Name: Air flow sensor

• Fitting Position: Right Rear
• Number of pins: 2
• paired article number: 2324094
• Manufacturer: METZGER

• Supplementary Article/Info 2: with integrated ABS sensor
• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-TY-089
• Manufacturer: NTY

Manufacturer: AUTO-GH

• Construction Year to: 02.2007
• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.07
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 07SKV103

• Fitting Position: Front Axle Left
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Engine Code: 4ZZ-FE
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.2008
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Construction Year to: 02.2007
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Engine Code: 4ZZ-FE
• Cable Length [mm]: 492
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Fitting Position: before catalytic converter, after catalytic converter Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.2008
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year to: 12.2008
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 460
• Name: DE ES21279-12B1
• Manufacturer: DELPHI

• Construction Year to: 02.2009
• Number of pins: 5
• Fitting Position: Air Filter Housing
• Recommended additional repairs: Air Filter
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: angular
• for OE number: 89465 02270
• Length [mm]: 410
• Weight [kg]: 0.131
• Thread Size: M18 x 1,5
• Number of circuits: 4
• Socket colour: grey
• Cable Length [mm]: 440
• Number of pins: 4
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 02.2007
• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 07SKV106
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 303
• Number of pins: 4
• Weight [kg]: 0.098
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: MAGNETI MARELLI

• Number of connectors: 3
• Weight [kg]: 0.017
• for OE number: 89421-26030
• Name: Andur,ohuvotu rohk
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• Construction Year to: 12.2008
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 438
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Number of connectors: 3
• Weight [kg]: 0.017
• for OE number: 89421-26030
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 11.2008
• Block Separation:
• Construction Year from: 03.2007
• Quantity: 1
• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black/silver
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: DLP

• Required quantity: 1
• Construction Year to: 02.2007
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI