• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: JPN

Manufacturer: MAGNETI MARELLI

• Engine Code: 1ZR-FE
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET

• Engine Code: 1ZR-FE
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of pins: 2
• Connector Shape: oval
• Socket colour: white
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: 1920KP
• Manufacturer: MEAT&DORIA

• for OE number: 90919-05060
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 30
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-TY-014
• Manufacturer: NTY

• Construction Year to: 04.2013
• Name: DETONATSIOONIANDUR
• Manufacturer: BOS

• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 2
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 30.1
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Fabrication Number: ECM-TY-003
• Manufacturer: NTY

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring, without cable
• Connector Shape: oval
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 2
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. TOYOTA/LEXUS
• Manufacturer: BRM

• Quantity: 1
• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 2
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

Manufacturer: MAGNETI MARELLI

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of pins: 2
• Manufacturer: JPN

• for OE number: 89465-02310
• Oxygen Sensor: Heated, Thread pre-greased
• Fabrication Number: ESL-TY-010
• Manufacturer: NTY

• Required quantity: 2
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO
• Name: VA 366136

• Voltage [V]: 12
• Housing Type: without housing
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Construction Year to: 12.2008
• Housing Type: without housing
• Fabrication Number: EPP-TY-005
• Manufacturer: NTY

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Oxygen Sensor: Diagnostic Probe
• Cable Length [mm]: 900
• Manufacturer: NTY

• Cable Length [mm]: 360
• Oxygen Sensor: Heated, Thread pre-greased
• Number of circuits: 4
• Fabrication Number: ESL-TY-006
• Manufacturer: NTY

• Housing Type: with housing, without housing
• Fabrication Number: EPP-TY-006
• Manufacturer: NTY

• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV193

• Engine Code: 1ZR-FE
• Required quantity: 1
• Manufacturer Restriction: DENSO
• Country Specific Design: Japan
• Manufacturer: FACET

• Construction Year to: 12.2008
• Number of pins: 5
• Quality class: PJ
• Name: Air flow sensor

• Quantity: 2
• Resistor Type: Hall Sensor
• Height [mm]: 30
• Manufacturer: VERNET

• Number of pins: 4
• Cable Length [mm]: 760
• Oxygen Sensor: Heated
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PA358229091

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 340
• Manufacturer: DELPHI ELEKTRONIKA

Manufacturer: AUTO-GH

• Construction Year to: 04.2013
• Oxygen Sensor: Diagnostic Probe, Finger-type Sensor
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: Andur,ohuvotu rohk
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 5
• Housing Type: without housing
• Manufacturer: JP GROUP
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Construction Year to: 04.2013
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Quality: OE
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Name: DN DOX-0109
• Lisainfo: DOX-0109 DENSO
• Additional information: DOX-0109 DENSO

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Switching-type Oxygen Sensor

• Number of pins: 3
• Pressure from [kPA]: 13
• Name: DE PS20080-12B1
• Manufacturer: DELPHI

• Construction Year from: 04.2010
• Construction Year to: 04.2013
• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Quality: OE
• Weight [g]: 100
• Gross Weight [g]: 149
• Manufacturer: DENSO
• Name: DN DOX-0106
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
AVENSIS STATION WAGO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
AVENSIS STATION WAGO
(kvaliteediklass: Q)"

• Construction Year to: 02.2009
• Number of pins: 5
• Fitting Position: Air Filter Housing
• Recommended additional repairs: Air Filter
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: 1ZR-FE
• Required quantity: 2
• Country Specific Design: Japan
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Fitting Position: Front, after catalytic converter
• for OE number: 8946502280
• Length [mm]: 400
• Thread Size: M18x1.5-6e
• Number of pins: 4
• Oxygen Sensor: Heated, Planar Sensor
• Manufacturer: KAVO

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10172

• Oxygen Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 370
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV749

• Construction Year to: 04.2013
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Colour: blue
• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fabrication Number: ESL-TY-000
• Manufacturer: NTY

• Oxygen Sensor: Switching-type Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Oxygen Sensor: Switching-type Oxygen Sensor
• Thread Size: M18x1.5
• Overall Length [mm]: 350
• Cable Length [mm]: 300
• Number of pins: 4
• Manufacturer: ERA

• Oxygen Sensor: Regulating Sensor, Heated
• Fitting Position: Exhaust Manifold
• Number of pins: 4
• Cable Length [mm]: 350
• for OE number: 8946502060
• Manufacturer: MEAT & DORIA

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 303
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 2
• Number of pins: 3
• Country Specific Design: Japan
• not for country specific design: Japan
• Weight [g]: 19
• Gross Weight [g]: 46
• Manufacturer: DENSO
• Name: DN DCPS0109

• Vehicle Identification Number (VIN): AHTLB56E*********
• Fitting Position: before catalytic converter
• Oxygen Sensor: Heated, Regulating Sensor
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 460
• Weight [kg]: 0.086
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Diagnostic Probe, Planar Sensor, Heated
• Fitting Position: after catalytic converter
• Quantity: 1
• Cable Length [mm]: 375
• Name: DE ES21107-12B1
• Manufacturer: DELPHI

• Oxygen Sensor: Regulating Sensor
• Construction Year from: 04.2010
• Construction Year to: 04.2013
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV114

• Engine Code: 1ZR-FE
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 350
• Conductor Number: 4
• Supplementary Article/Info 2: with fastening material
• Available as universal article as well, see article no.: 10.8235
• Number of circuits: 4
• Manufacturer: FACET

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Construction Year from: 02.2009
• Number of connectors: 5
• Manufacturer: JPN

• Construction Year to: 04.2013
• Manufacturer: BOSCH

• Engine Code: 1ZR-FE
• Pressure from [kPA]: 10
• Pressure to [kPA]: 139
• Output Voltage, from [V]: 0.895
• Output Voltage, up to [V]: 4.638
• Supplementary Article/Info 2: without fastening clamp
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: EPS

• Oxygen Sensor: Regulating Sensor
• Exhaust System: for pre-catalytic converter
• Construction Year from: 08.2010
• Construction Year to: 04.2013
• Emission Standard: Euro 5
• Vehicle Production Country: Japan
• Length [mm]: 400
• Number of pins: 4
• Manufacturer: FAE ELEKTRYKA

• Measuring Range from [kPa]: 10
• Measuring Range to [kPa]: 138.7
• Measuring Range from [V]: 0.89
• Measuring Range to [V]: 4.64
• Manufacturer: VERNET

• Number of connectors: 3
• Weight [kg]: 0.017
• for OE number: 89421-26030
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Construction Year to: 04.2013
• Vehicle Production Country: Japan
• for OE number: 89465-12800, 894650E140
• Thread Size: M18x1.5
• Cable Length [mm]: 415
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 96
• Gross Weight [g]: 124
• Manufacturer: DENSO
• Name: DN DOX-0644

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Thread pre-greased, Switching-type Oxygen Sensor

• Number of connectors: 3
• Weight [kg]: 0.017
• for OE number: 89421-26030
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 04.2010
• Construction Year to: 04.2013
• Exhaust System: for pre-catalytic converter
• for OE number: 89465-12880, 8946502310
• Thread Size: M18x1.5
• Cable Length [mm]: 340
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 100
• Gross Weight [g]: 133
• Manufacturer: DENSO

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Construction Year to: 11.2008
• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black/silver
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: DLP

• Number of connectors: 2
• Weight [kg]: 0.044
• for OE number: 8961520090
• Name: DETONATSIOONIANDUR
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Alternatively:
• Number of pins: 5
• Manufacturer: ERA

• Required quantity: 1
• Construction Year from: 01.2009
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• Construction Year from: 01.2009
• Quantity: 1
• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10347-12B1

• Construction Year to: 12.2008
• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 5
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Name: HE 8ET009142951
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 04.2013
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 375
• Manufacturer: BOSCH

• Construction Year to: 12.2008
• Number of pins: 5
• for OE number: 22204-31020
• Quality: OE
• Operating Mode: Electric
• Gross Weight [g]: 58
• alternative item: -
• Manufacturer: DENSO
• Name: DN DMA-0110

• Construction Year from: 01.2009
• Required quantity: 1
• Mounting Type: Plugged
• Number of pins: 5
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 01.2009
• Construction Year to: 04.2013
• Number of pins: 5
• for OE number: 22204-28010
• Quality: OE
• Operating Mode: Electric
• Gross Weight [g]: 58
• alternative item: -
• Manufacturer: DENSO
• Name: DN DMA-0111

Additional information: "Tootja: DENSO
NOAH (ZRR7/), 12.01-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
NOAH (ZRR7/), 12.01-
(kvaliteediklass: Q)"

• Construction Year from: 08.2010
• Construction Year to: 04.2013
• Vehicle Production Country: Japan
• Exhaust System: for pre-catalytic converter
• for OE number: 89467-52060, 8946774040
• Thread Size: M18x1.5
• Cable Length [mm]: 375
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 88
• Gross Weight [g]: 116
• Manufacturer: DENSO
• Quality class: Q
• Name: Lambda sensor

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Fitting Position: before catalytic converter
• Number of pins: 4
• Connector Shape: angular
• Oxygen Sensor: Heated, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.