• Fabrication Number: ECC-TY-000
• Spanner Size: 24
• Socket colour: black
• Number of pins: 1
• Manufacturer: NTY

• Fabrication Number: ECT-TY-001
• Number of pins: 2
• Thread Size: M12x1,5
• Connector Shape: oval
• Socket colour: white
• Sensor Type: NTC Sensor
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NTY
• Name: NTY ECT-TY-001

• Engine Code: 3ZR-FAE
• Manufacturer Restriction: TOKAIRIKA
• Colour: black
• Pressure [bar]: 0
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Switch Pressure [bar]: 0.2
• Thread Size: 1/8x28 BSPT
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER
• Additional information: OS3557
• Lisainfo: OS3557

• Engine Code: 3ZR-FAE
• Spanner Size: 24
• Number of connectors: 1
• Shifting Points [bar]: 0.2
• Weight [kg]: 0.04
• Name: OLISURVELšLITUS
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Spanner Size: 19
• for OE number: 89422-33030
• Number of pins: 2
• Thread Size: M12x1,5
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAX

• Construction Year to: 04.2018
• Manufacturer: BOSCH

• Pressure [bar]: 0.2
• Thread Size: 1/8 GAS
• Number of pins: 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Pressure [bar]: 2
• Housing Colour: grey
• Thread Size: R1/8
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: white
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 1920KP
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Engine Code: 3ZR-FAE
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Connector Shape: rectangular
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: M12*1,5
• Name: NI 207098
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Housing Colour: white
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP
• Additional information: TS10289 DEL
• Lisainfo: TS10289 DEL

• Thread Size: M12x1.5
• Manufacturer: CALORSTAT BY VERNET

• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Weight [kg]: 0.03
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 90919-05060
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 30
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-TY-014
• Manufacturer: NTY

• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Weight [kg]: 0.03
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: ESS-TY-001
• Manufacturer: NTY

• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. TOYOTA/LEXUS
• Manufacturer: BRM

Manufacturer: MAGNETI MARELLI

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168411

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE SS11268

• Height [mm]: 62
• Resistor [Ohm]: 2,100
• Number of connectors: 2
• Manufacturer: VERNET

• Fabrication Number: ECC-TY-001
• Manufacturer: NTY
• Name: NTY ECC-TY-001

• Construction Year to: 08.2018
• Engine Code: 3ZRFAE-HTWVM
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Manufacturer: VALEO
• Name: VA 366136

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Cable Length [mm]: 360
• Lambda Sensor: Heated, Thread pre-greased
• Number of circuits: 4
• Fabrication Number: ESL-TY-006
• Manufacturer: NTY

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Housing Type: with housing, without housing
• Fabrication Number: EPP-TY-006
• Manufacturer: NTY

• Construction Year to: 11.2011
• Engine Code: 3ZRFAE-HTWVM
• Weight [kg]: 0.04
• Manufacturer: VALEO

• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Name: Andur, v„ntvoll
• Manufacturer: MEY

• Number of pins: 2
• Connector Shape: oval
• Manufacturer: METZGER

• Lambda Sensor: Diagnostic Probe, Heated
• Number of circuits: 4
• Resistor [Ohm]: 13
• Conductor Number: 4
• Length [mm]: 370
• Cable Length [mm]: 370
• Manufacturer: MAGNETI MARELLI

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Number of mounting bores: 1
• Sensor Type: Inductive Sensor
• Resistor [kOhm]: 2.1
• Fitting Depth [mm]: 62
• for OE number: 90919 05070
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV913
• Manufacturer: ESEN SKV

• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Lisainfo: DOX-0109 DENSO
• Additional information: DOX-0109 DENSO

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor

• Fitting Position: Front, after catalytic converter
• Length [mm]: 400
• Thread Size: M18x1.5-6e
• Number of pins: 4
• Lambda Sensor: Heated, Planar probe
• Manufacturer: KAVO

• Construction Year to: 08.2018
• Engine Code: 3ZRFAE-HTWVM
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Connector Shape: round
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 2,100
• Weight [kg]: 0.06
• Manufacturer: VALEO

• Engine Code: 3ZR-FAE
• Country Specific Design: Japan
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Number of pins: 2
• Housing Colour: black
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10172

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Construction Year to: 04.2018
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-TY-011
• Manufacturer: NTY

• Engine Code: 3ZR-FE
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Diagnostic Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: MAGNETI MARELLI

• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: angular
• for OE number: 89465 02270
• Length [mm]: 410
• Weight [kg]: 0.131
• Thread Size: M18 x 1,5
• Number of circuits: 4
• Socket colour: grey
• Cable Length [mm]: 440
• Number of pins: 4
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 89467-12030
• Lambda Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 460
• Weight [kg]: 0.086
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 2
• Number of pins: 3
• Weight [g]: 19
• Country Specific Design: Japan
• not for country specific design: Japan
• Gross Weight [g]: 46
• Manufacturer: DENSO
• Name: DN DCPS0109

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 375
• Name: DE ES21107-12B1
• Manufacturer: DELPHI

• Number of pins: 2
• Manufacturer: FAE

• for OE number: 894650E140
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 415
• Number of pins: 4
• Weight [g]: 96
• Gross Weight [g]: 124
• Manufacturer: DENSO

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Thread pre-greased, Lambda Sensor

• Construction Year to: 04.2018
• Manufacturer: BOSCH

• Alternatively:
• Number of pins: 5
• Manufacturer: ERA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• Construction Year from: 05.2015
• Engine Code: 3ZR-FAE
• for OE number: 89467-52060
• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• Length [mm]: 400
• Number of pins: 4
• Manufacturer: FAE

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10347-12B1

• Engine Code: 3ZR-FAE
• Construction Year from: 05.2015
• Construction Year to: 04.2018
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 379
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Weight [kg]: 0.08
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV111
• Manufacturer: ESEN SKV

• for OE number: 22204-28010
• Quality: OE
• Operating Mode: Electric
• Number of pins: 5
• Gross Weight [g]: 58
• Manufacturer: DENSO

Additional information: "Tootja: DENSO
NOAH (ZRR7/), 12.01-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
NOAH (ZRR7/), 12.01-
(kvaliteediklass: Q)"

• for OE number: 89467-12030
• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• Length [mm]: 400
• Number of pins: 4
• Manufacturer: FAE

• Engine Code: 3ZR-FAE
• Construction Year from: 05.2015
• for OE number: 89467-52060, 8946774040
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 375
• Number of pins: 4
• Weight [g]: 88
• Gross Weight [g]: 116
• Manufacturer: DENSO
• Name: DN DOX-0566

Lambda Sensor: Regulating Probe, Heated, Finger probe, Broadband lambda sensor, Thread pre-greased

• for OE number: 89467-12030, 89467-50010
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 380
• Number of pins: 4
• Weight [g]: 97
• Gross Weight [g]: 130
• Manufacturer: DENSO
• Name: DN DOX-0503
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Broadband lambda sensor, Thread pre-greased

• Operating Mode: Electric
• Voltage [V]: 12
• Name: OHUMASSIMOOTJA
• Manufacturer: PIE