• Number of pins: 2
• Manufacturer: JP GROUP A/S
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Active sensor
• Length [mm]: 750
• Socket colour: black

• Length [mm]: 59
• Housing Colour: black
• Spanner Size: 19
• Manufacturer: KAMOKA

• Fabrication Number: ECT-MS-000
• Manufacturer: NTY
• Name: NTY ECT-MS-000

• Thread Size: 3/8x19 BSP
• Manufacturer: VERNET

Manufacturer: MAGNETI MARELLI

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: 3/8
• for OE number: MD177572
• Manufacturer: NRF

• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: 3/8"-19BSP
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• Manufacturer: MEAT&DORIA

for OE number: 1338.G4, 89422-87101, 39220 35710, MD177572, 122 153 01 28

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: PT3/8
• Name: NI 207007
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Thread Size: 3/8 GAS
• Spanner Size: 19
• Number of pins: 2
• Housing Colour: black
• Height [mm]: 17
• Manufacturer: ERA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-VW-014
• Manufacturer: NTY

Fabrication Number: ESS-FT-002

• Colour: black
• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Engine Code: M 135.950
• Housing Colour: black
• Number of pins: 2
• Thread Size: PT3/8
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10327

• Number of pins: 2
• Housing Colour: black
• Thread Size: 3/8x19 BSP
• Manufacturer: FAE

• Length [mm]: 59.7
• Spanner Size: 19
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.04
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 59.7
• Spanner Size: 19
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.04
• Name: SW 80 93 2375
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-MS-037
• Manufacturer: NTY

• Engine Code: M 135.950
• Thread Size: 3/8-GAS
• Spanner Size: 19
• Manufacturer: FACET

• for OE number: MN195775
• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 10
• Pressure to [kPA]: 115
• Fabrication Number: ECM-MS-001

• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Pressure from [kPA]: 10
• Pressure to [kPA]: 118
• Manufacturer: FAST

• Engine Code: M 135.950
• Thread Size: 3/8-GAS
• Spanner Size: 19
• Manufacturer: EPS

• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 294
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: 3/8 GAS
• Colour: black
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: black
• Mounting Type: Vertical Screw Fitting
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107121

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 755
• Manufacturer: KAMOKA

• for OE number: MR955037, 454 542 03 18
• Overall Length [mm]: 825
• Cable Length [mm]: 750
• Sensor Type: Active sensor
• Number of pins: 2
• Fitting Depth [mm]: 20
• Connector Shape: oval
• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-MS-038

• Construction Year from: 04.2004
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Number of pins: 3
• Fabrication Number: ECP-MS-000
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Hall Sensor
• Length [mm]: 730
• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 735
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Manufacturer: AUTO-GH

• Alternatively:
• Number of pins: 2
• Alternative Repair Kit: 550305
• Manufacturer: ERA

• Engine Code: M 135.950
• Manufacturer: FACET

• Fitting Position: Suction Pipe
• Connector Shape: oval
• Number of pins: 4
• Sensor Type: NTC Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle both sides
• Manufacturer: JAPKO

• Engine Code: M 135.950
• Name: EP 1.957.006
• Manufacturer: EPS

• for OE number: A 005 153 61 28
• Number of pins: 4
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 735
• Weight [kg]: 0.055
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle both sides
• Manufacturer: ASHIKA

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PG013114441

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Measuring Range from [kPa]: 10
• Measuring Range to [kPa]: 115
• Measuring Range from [V]: 0.4
• Measuring Range to [V]: 4.65
• Number of connectors: 4
• Manufacturer: VERNET

• Fitting Position: Front Axle
• Quantity: 2
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 845
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20678

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Fitting Position: Front Axle both sides
• Length [mm]: 790
• Manufacturer: JPN

• Thread Size: M18x1.5
• Cable Length [mm]: 475
• Number of pins: 4
• Fabrication Number: ESL-MS-008
• Manufacturer: NTY

Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased Fitting Position: before catalytic converter, after catalytic converter

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Voltage [V]: 12
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 750
• Number of pins: 2
• Quality: IAM
• Manufacturer: METZGER

• Length [mm]: 52
• Inner Diameter [mm]: 8.4
• Number of connectors: 2
• Material: Plastic, Metal
• Weight [kg]: 0.045
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 755
• Weight [kg]: 0.063
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Overall Length [mm]: 825
• Length [mm]: 18
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 750
• paired article number: 30623
• Weight [kg]: 0.07
• Manufacturer: A.B.S.

• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Thickness [mm]: 43.45
• Outer Diameter [mm]: 12.9
• Number of connectors: 4
• Weight [kg]: 0.025
• Supplementary Article/Info 2: with seal ring
• for OE number: 006 153 47 28
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: FAE

• Frequency Range [MHz]: 433
• for OE number: A0009057200
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Weight [kg]: 0.025
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M 135.950
• Pressure from [kPA]: 10
• Pressure to [kPA]: 118
• Output Voltage, from [V]: 0.385
• Output Voltage, up to [V]: 4.7
• Manufacturer: FACET

• Fitting Position: Front Axle
• Overall Length [mm]: 825
• Length [mm]: 38
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 735
• paired article number: 30624
• Weight [kg]: 0.12
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 786
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Manufacturer: BOSCH

• Engine Code: M 135.950
• Pressure from [kPA]: 10
• Pressure to [kPA]: 118
• Output Voltage, from [V]: 0.385
• Output Voltage, up to [V]: 4.7
• Name: EP 1.993.091
• Manufacturer: EPS

• Fitting Position: Rear Axle
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 808
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Manufacturer: BOSCH

• Manufacturer: BOSCH
• Name: BS 0261230118

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV909

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 450
• Manufacturer: DELPHI
• Name: DE ES20644-12B1

• Outer Diameter [mm]: 55
• Number of connectors: 3
• Weight [kg]: 0.002
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 370
• Manufacturer: DELPHI
• Name: DE ES21319-12B1

• Length [mm]: 54.5
• Number of connectors: 3
• Weight [kg]: 0.002
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 54.5
• Number of connectors: 3
• Weight [kg]: 0.002
• Supplementary Article/Info 2: with seal ring
• Name: SW 80 93 2088
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M 135.950
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M 135.950
• Fitting Position: after catalytic converter
• Cable Length [mm]: 350
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.340
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986602

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year from: 09.2004
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Exhaust System: for pre-catalytic converter
• for OE number: MN128424
• Quality: OE
• Manufacturer Restriction: DENSO
• Connector type: with rubber grommet
• Thread Size: M18x1.5
• Cable Length [mm]: 475
• Number of pins: 4
• Weight [g]: 121
• Gross Weight [g]: 154
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 348
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH
• Name: BS 0258006568

• Construction Year from: 04.2004
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 350
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: rectangular
• Manufacturer: VALEO

Fitting Position: before catalytic converter, after catalytic converter

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Overall Length [mm]: 478
• Manufacturer: BOSCH

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring