• Engine Code: D 4204 T8
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• for OE number: 31370160
• Diameter 1 [mm]: 8
• Diameter 2 [mm]: 6
• Number of pins: 3
• Connector Shape: oval
• Fabrication Number: ECS-VV-000
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Engine Code: D 4204 T8
• Number of pins: 2
• Housing Colour: white
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Connector Shape: oval
• Fabrication Number: ECM-VV-001
• Manufacturer: NTY

• Fabrication Number: ECP-VV-000
• Manufacturer: NTY

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS12311-12B1

• Connector Shape: oval
• Pressure from [bar]: 0.11
• Pressure to [bar]: 3.07
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: ECS-DW-001
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. VOLVO S80 3,0 07-
• Manufacturer: BRM

• Connector Shape: oval
• Number of pins: 3
• Fitting Position: Exhaust Manifold
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: D 4204 T8, D 4204 T13
• Number of pins: 4
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Manufacturer: ERA

• Engine Code: D 4204 T8
• Construction Year from: 09.2015
• Construction Year to: 07.2018
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• for OE number: 31439825
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Fabrication Number: EGT-VV-008
• Cable Length [mm]: 255
• Manufacturer: NTY

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 100,000
• for OE number: 1821553SA0
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• Engine Code: D 4204 T8
• Exhaust System: before soot particulate filter
• Pressure from [kPA]: 0
• Pressure to [kPA]: 100
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Number of pins: 4
• Pressure from [kPA]: 50
• Name: DE PS20097-12B1
• Manufacturer: DELPHI

• for OE number: 31439823
• Number of pins: 2
• Connector Shape: oval
• Exhaust System: for catalytic converter
• Fabrication Number: EGT-VV-007
• Cable Length [mm]: 340
• Manufacturer: NTY

• Number of pins: 3
• Name: DE DPS00047-12B1
• Manufacturer: DELPHI

• Exhaust System: before soot particulate filter
• Number of circuits: 2
• Number of mounting bores: 1
• Connector Shape: oval
• Number of pins: 3
• Weight [kg]: 0.023
• for OE number: 22 77 1JG 70A
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 31439823
• Cable Length [mm]: 340
• Number of pins: 2
• Connector Shape: oval
• Warranty: 3 years warranty
• Exhaust System: for catalytic converter
• Weight [kg]: 0.08
• Shape: straight
• Name: CE 30SKV356
• Manufacturer: ESEN SKV

• Warranty: 3 years warranty
• Weight [kg]: 0.08
• Manufacturer: SKV GERMANY

• Alternatively:
• Number of pins: 3
• Manufacturer: DELPHI

• Required quantity: 1
• Fitting Position: behind exhaust turbocharger
• Engine Code: D 4204 T8, D 4204 T13
• Connector Shape: oval
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 35
• Cable Length [mm]: 340
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• Engine Code: D 4204 T8
• Number of connectors: 3
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.02
• for OE number: 22 77 014 54R
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: after catalytic converter
• Cable Length [mm]: 290
• Sensor Type: PTC
• Supplementary Article/Supplementary Info: with additional hold position
• Number of pins: 2
• Warranty: 3 years warranty
• Weight [kg]: 0.09
• Name: CE 30SKV405
• Manufacturer: ESEN SKV

• Engine Code: D 4204 T13, D 4204 T8
• Transmission Code: M76, TF-71SC, M66
• Model Year from: 2020, 2016
• Block Separation:
• Model Year to: 2018, 2017
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Name: Andur, diferentsiaalrohk
• Manufacturer: PIE

• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Fitting Position: before catalytic converter, after catalytic converter Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 1
• Fitting Position: before soot particulate filter
• Engine Code: D 4204 T8
• Vehicle Identification Number (VIN) to: 285851
• Connector Shape: oval
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 35
• Cable Length [mm]: 240
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Thread Size: M18x1.5
• Cable Length [mm]: 515
• Number of pins: 4
• Fabrication Number: ESL-VV-001
• Manufacturer: NTY

Fitting Position: before catalytic converter, after catalytic converter Lisainfo: ENG. 1.5-2.5 VOLVO S60 II 13-18,S80 II 06-14,S90 II 16-,XC60 13-,XC70 II 13-16,XC90 II 14-/REGULACYJNA, DLA KATALIZATORA WSTPNEGO, Dœ.KABLI 515MM Additional information: ENG. 1.5-2.5 VOLVO S60 II 13-18,S80 II 06-14,S90 II 16-,XC60 13-,XC70 II 13-16,XC90 II 14-/REGULACYJNA, DLA KATALIZATORA WSTPNEGO, Dœ.KABLI 515MM

• Engine Code: D 4204 T13
• Construction Year from: 06.2018
• Construction Year to: 07.2019
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: BOS

• Lambda Sensor: Diagnostic Probe, Broadband lambda sensor, Heated
• Fitting Position: after catalytic converter
• Quantity: 1
• Engine Code: D 4204 T13
• Cable Length [mm]: 200
• Manufacturer: DELPHI
• Name: DE ES21290-12B1

• Length [mm]: 515
• Number of circuits: 4
• Conductor Number: 4
• Resistor [Ohm]: 2.1
• Cable Length [mm]: 515
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM307

• Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Engine Code: D 4204 T13
• Cable Length [mm]: 570
• Manufacturer: DELPHI
• Name: DE ES21271-12B1

• Shape: straight
• Number of pins: 2
• Connector Shape: oval
• Temperature range from [°C]: -40
• Temperature range to [°C]: 900
• Manufacturer: VEMO GERMANY

General Information: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.

• Number of pins: 2
• Exhaust System: for catalytic converter
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Construction Year from: 04.2018
• Construction Year to: 07.2019
• Engine Code: D4204T13
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Manufacturer: VALEO

• Number of pins: 2
• Warranty: 5 years warranty
• Fitting Position: before soot particulate filter
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Fitting Position: after catalytic converter
• Number of pins: 2
• Cable Length [mm]: 290
• Sensor Type: PTC
• Supplementary Article/Supplementary Info: with additional hold position
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• Voltage [V]: 12
• Fabrication Number: EPP-TY-010
• Manufacturer: NTY

• Shape: L Shape
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• for OE number: 31439825
• Manufacturer: MEAT&DORIA

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Shape: straight
• Number of pins: 2
• Connector Shape: oval
• Cable Length [mm]: 340
• Exhaust System: for catalytic converter
• for OE number: 31439823
• Manufacturer: MEAT&DORIA

• Engine Code: D 4204 T13, D 4204 T8
• Construction Year from: 06.2018, 09.2015
• Construction Year to: 07.2019, 07.2018
• Block Separation:
• Manufacturer: BOSCH

Fitting Position: before catalytic converter, before soot particulate filter

• Fitting Position: Catalytic Converter, Upper
• Engine Code: D 4204 T8, D 4204 T13
• Vehicle Identification Number (VIN) from: 285852, 94634
• Block Separation:
• for type code: Cross Country
• Cable Length [mm]: 370
• Thread Size: M14 x 1,5
• Number of pins: 2
• Manufacturer: METZGER

• for OE number: 31430000, 22204-75040
• Quality: OE
• Operating Mode: Electric
• Number of pins: 4
• Gross Weight [g]: 70
• Manufacturer: DENSO
• Name: DN DMA-0115

• for OE number: 31319385, 31370197 / 31370666
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 515
• Number of pins: 4
• Weight [g]: 97
• Gross Weight [g]: 130
• Manufacturer: DENSO
• Name: DN DOX-0535

Lambda Sensor: Regulating Probe, Heated, Finger probe, Broadband lambda sensor, Thread pre-greased

• Lambda Sensor: Diagnostic Probe
• Cable Length [mm]: 280
• Number of pins: 4
• Manufacturer: MEAT&DORIA