Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Width [mm]: 7
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 47
-
Material: FPM
(fluoride rubber) - Fitting Position: transmission sided
- Weight [kg]: 0.12
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width [mm]: 7
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 47
-
Material: FPM
(fluoride rubber) - Fitting Position: transmission sided
- Weight [kg]: 0.12
- Name: SW 55 91 4984
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: transmission sided
- Engine Code: B 4184 S9
-
Material: NBR
(nitrile butadiene rubber) - Inner Diameter [mm]: 30
- Outer Diameter [mm]: 47
- Height [mm]: 7
- Radial Shaft Seal Design: B
-
Swirl Type: Left-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: REI
- Thickness [mm]: 7
- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 57
-
Material: FPM
(fluoride rubber) - Fitting Position: frontal sided
- Weight [kg]: 0.16
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: frontal sided
- Thickness [mm]: 7
- Inner Diameter [mm]: 51
- Outer Diameter [mm]: 65
- Engine Code: B 4184 S9
- Fitting Position: frontal sided
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 47
- Height [mm]: 7
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: AJU
- Fitting Position: transmission sided
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 47
- Height [mm]: 7
- Radial Shaft Seal Design: A
-
Swirl Type: Left-
hand Twist -
Material: FPM
(fluoride rubber)/ ACM (polyacrylate rubber) - Dust Cover: without dust lip
- Manufacturer: ELRING
- Fitting Position: frontal sided
- Engine Code: B 4184 S9
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 45
- Outer Diameter [mm]: 65
- Height [mm]: 7
- Radial Shaft Seal Design: A SL
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: REI
- Fitting Position: frontal sided
- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 65
- Height [mm]: 7
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist -
Material: FPM
(fluoride rubber)/ ACM (polyacrylate rubber) - Dust Cover: with dust lip
-
Name: Volli rongastihend,
Nukkvoll - Manufacturer: ELR
- Thickness [mm]: 6.5
- Width [mm]: 59
- Length [mm]: 62
- Manufacturer: AJUSA
- Fitting Position: frontal sided
- Inner Diameter [mm]: 51
- Outer Diameter [mm]: 65
- Height [mm]: 7
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist -
Material: FPM
(fluoride rubber) - Dust Cover: with dust lip
- Manufacturer: ELRING
- Lisainfo: 362.740 ELR
- Fitting Position: frontal sided
- Engine Code: B 4184 S9
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 51
- Outer Diameter [mm]: 65
- Height [mm]: 7
- Radial Shaft Seal Design: A SL
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: REI
- Engine Code: B 4184 S9
- Fitting Position: transmission sided
- Inner Diameter [mm]: 51
- Outer Diameter [mm]: 66
- Height [mm]: 7
- Manufacturer: AJUSA
- Engine Code: B 4184 S9
- Block Separation:
- Fitting Position: frontal sided
- Inner Diameter [mm]: 45
- Outer Diameter [mm]: 65
- Height [mm]: 7
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: AJU
-
Operating Mode: Electric-
hydraulic - Valve type: for inlet valves
- Number of pins: 2
- Warranty: 3 years warranty
- Weight [kg]: 0.22
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 39SKV045
- Number of pins: 2
-
Operating Mode: Electric-
hydraulic - Weight [kg]: 0.3
- Fitting Position: Intake Side
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fabrication Number: RKZ-
VV- 000 - Engine Timing: Timing Belt
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Model Year from: 2001
- Engine Timing: Timing Belt
- Weight [kg]: 1.449
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: B 4184 S9
- Fitting Position: Intake Side
- Valve type: Control Valve
-
Operating Mode: Electric-
hydraulic - Voltage [V]: 12
- Supplementary Article/Supplementary Info: with seal
-
Name: JUHTKLAPP,
NUKKVOLLI ASEND - Manufacturer: PIE
General Information: Without deposit return for used part. No return of the solenoid valve.
-
Operating Mode: Electric-
hydraulic - Number of pins: 2
- Voltage [V]: 12
- Fitting Position: Intake Side
- Valve type: Solenoid Valve
- Quality: IAM
- Manufacturer: METZGER
- Vehicle Identification Number (VIN) from: 415000
- Fitting Position: Intake Side
- Number of Teeth: 42
- Operating Mode: Hydraulic
- Name: Nukkvolliseadistaja
- Manufacturer: DRM
- Model Year from: 2001
- Engine Timing: Spur Gears
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks