Lisainfo: Inner Tie Rod

• Fitting Position: Front Axle Left, Front Axle Right
• Lisainfo: Tie Rod End
• Additional information: Tie Rod End

Lisainfo: Tie Rod End

• Name: Axial joint
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: SDK-MS-017

• Fitting Position: Front Axle
• Internal Thread [mm]: M 14x1,5
• Name: Axial joint left, right
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Name: Tie rod end
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
HYUNDAI ATOS/LANTRA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left
• paired article number: 4944600680
• Lisainfo: Tie Rod End
• Additional information: Tie Rod End

• Fitting Position: Front Axle Right
• paired article number: 4944600670
• Lisainfo: Tie Rod End
• Additional information: Tie Rod End

• Vehicle Identification Number (VIN) to: 599999
• Fitting Position: Front Axle both sides
• Required quantity: 2
• paired article number: VKDY 316048
• Length [mm]: 79
• Thread Size: M12 x 1,25
• Supplementary Article/Supplementary Info: with synthetic grease
• Thread Size 1: M10 x 1,25
• Name: SK VKDY316048
• Manufacturer: SKF

• Fitting Position: Front Axle, both sides
• Thread Type: with right-hand thread
• Internal Thread [mm]: M12x1,25
• Thread Size 2: M12x1,25
• Manufacturer: ACKOJA

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 79
• Internal Thread Size: M12 x 1,25
• External Thread Size: M10 x 1,25
• Spanner Size: 14
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.331
• Supplementary Article/Info 2: with crown nut
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: CORTECO
• Name: COC 49400838

• Fitting Position: Front Axle, both sides
• Thread Type: with right-hand thread
• Internal Thread [mm]: M12x1,25
• Thread Size 2: M12x1,25
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Right
• Width [mm]: 42
• Height [mm]: 74
• Weight [kg]: 0.358
• Material: Steel
• Thread Size 1: M10x1,25
• Thread Size 2: M14x1,5
• Max. Length [mm]: 111
• paired article number: VO-452
• Name: Tie rod end right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VOLVO S/V 40 00-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VOLVO S/V 40 00-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left
• Width [mm]: 42
• Height [mm]: 74
• Weight [kg]: 0.355
• Material: Steel
• Thread Size 1: M10x1,25
• Thread Size 2: M14x1,5
• Max. Length [mm]: 111
• paired article number: VO-451
• Name: Tie rod end left
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VOLVO S/V 40 00-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VOLVO S/V 40 00-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Internal Thread [mm]: M 14x1,5
• Quality class: PJ
• Name: Tie rod end left

• Fitting Position: Front Axle
• Internal Thread [mm]: M 14x1,5
• Quality class: PJ
• Name: Tie rod end right

• Fitting Position: Front Axle both sides, outer, Front Axle
• Thread Size: M12x1.25
• Thread Type: with right-hand thread
• Cone Size [mm]: 13.4
• Length [mm]: 99
• Width [mm]: 44
• Height [mm]: 69
• Manufacturer: DELPHI
• Name: DE TA1536

• Fitting Position: Front Axle Left, Front Axle Right
• Axle Joint Length [mm]: 315
• Thread Size 1: M16x1.5
• Thread Size 2: M14x1.5
• Weight [kg]: 0.59
• Name: DY 24-07197
• Manufacturer: DYS

• Length [mm]: 79
• Internal Thread Size: M12 x 1,25
• External Thread Size: M10 x 1,25
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.331
• Supplementary Article/Info 2: with crown nut
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Base body material: Steel
• Length [mm]: 305
• Net weight [kg]: 0.571
• Thread Size 1: M16x1,5
• Thread Size 2: M12x1,25
• Name: OMG G11.4941
• Manufacturer: OMG

• Fitting Position: Front Axle
• Width [mm]: 36
• Height [mm]: 36
• Weight [kg]: 0.586
• Material: Steel
• Thread Size 1: M14x1,5
• Thread Size 2: M16x1,5
• Max. Length [mm]: 341
• Name: Axial joint left, right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VOLVO S/V 40 00-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VOLVO S/V 40 00-
(kvaliteediklass: PJ)"

• Fitting Position: 1st front axle left
• Length [mm]: 90
• Thread Size 1: M14x1.5
• Thread Size 2: M10x1.25
• paired article number: 22-07196-1
• Weight [kg]: 0.34
• Name: DY 22-07196-2
• Manufacturer: DYS

• Length [mm]: 79
• Internal Thread Size: M12 x 1,25
• External Thread Size: M10 x 1,25
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.331
• Supplementary Article/Info 2: with crown nut
• Manufacturer: SWAG
• Name: SW 55 71 0012

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Cone Size [mm]: 13.3
• Thread Size: M12x1,25
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 840063110

• Fitting Position: Front Axle
• Weight [g]: 361
• Length [mm]: 74
• Thread Size: M12XP1.25
• Internal Thread [mm]: M12XP1.25
• Supplementary Article/Info 2: with nut
• Manufacturer: CTR

• Fitting Position: 1st front axle right
• Length [mm]: 90
• Thread Size 1: M14x1.5
• Thread Size 2: M10x1.25
• paired article number: 22-07196-2
• Weight [kg]: 0.37
• Name: DY 22-07196-1
• Manufacturer: DYS

• Fitting Position: Front Axle Right
• Cone Size [mm]: 13.4
• Thread Size: M10x1,25
• Length [mm]: 90
• Internal Thread [mm]: M14x1,5
• paired article number: 840 1388 10
• SVHC: No SVHC present!
• Manufacturer: FAG

• Thread Size 1: M12x1.25
• Thread Size 2: M16x1.5
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: DELPHI
• Name: DE TA1800

• Name: Axial joint
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MITSUBISHI CARISMA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, both sides
• Thread Type: with right-hand thread
• Internal Thread [mm]: M12x1,25
• Thread Size 2: M12x1,25
• Manufacturer: LEMFÖRDER
• Name: LMI 1556001

SVHC: No information available, please contact the manufacturer!

• Length [mm]: 302
• External Thread Size: M16 x 1,5, M12 x 1,25
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.523
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size 1: M14x1.5
• Thread Size 2: M16x1.5
• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 340
• Width [mm]: 36
• Height [mm]: 36
• Axle Joint Length [mm]: 315
• Manufacturer: DELPHI
• Name: DE TA1913

• Fitting Position: Front Axle
• Weight [kg]: 0.58
• Packaging length [cm]: 34.5
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Fitting Position: Front Axle Left
• Internal Thread [mm]: M 14x1,5
• paired article number: 49399744
• Name: COC 49399527
• Manufacturer: CORTECO

• Fitting Position: Front Axle Right
• Internal Thread [mm]: M 14x1,5
• paired article number: 49399527
• Name: COC 49399744
• Manufacturer: CORTECO

• Fitting Position: Front Axle Right
• paired article number: 81875AL
• Cone Size [mm]: 13.4, 15
• Length [mm]: 90
• Thread Size: M10 x 1,25, M14 x 1,5
• Name: ALT 81874AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle Left
• paired article number: 81874AL
• Cone Size [mm]: 13.4, 15
• Length [mm]: 90
• Thread Size: M10 x 1,25, M14 x 1,5
• Name: ALT 81875AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Right, Front Axle Right
• Thread Size: M14x1.5
• Thread Type: with right-hand thread
• Cone Size [mm]: 13.4
• paired article number: TA2047
• Length [mm]: 108
• Width [mm]: 36
• Height [mm]: 65
• Manufacturer: DELPHI
• Name: DE TA2048

• Fitting Position: Left, Front Axle Left
• Thread Size: M14x1.5
• Thread Type: with right-hand thread
• Cone Size [mm]: 13.4
• paired article number: TA2048
• Length [mm]: 108
• Width [mm]: 36
• Height [mm]: 65
• Manufacturer: DELPHI

• Length [mm]: 340
• External Thread Size: M14 x 1,5, M16 x 1,5
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.551
• Supplementary Article/Supplementary Info: with lock nut
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 302
• External Thread Size: M12 x 1,25, M16 x 1,5
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.523
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 340
• External Thread Size: M14 x 1,5, M16 x 1,5
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.551
• Supplementary Article/Supplementary Info: with lock nut
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 21563
• Length [mm]: 90
• Internal Thread Size: M14 x 1,5
• Material: Steel
• Fitting Position: Front Axle Right
• Weight [kg]: 0.398
• Supplementary Article/Supplementary Info: with lock nut
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 21564
• Length [mm]: 90
• Internal Thread Size: M14 x 1,5
• Material: Steel
• Fitting Position: Front Axle Left
• Weight [kg]: 0.398
• Supplementary Article/Supplementary Info: with lock nut
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 600000
• Fitting Position: Front Axle Right
• paired article number: VKDY 316049
• Name: SK VKDY316050
• Manufacturer: SKF

• Length [mm]: 302
• External Thread Size: M12 x 1,25, M16 x 1,5
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.523
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 599999
• Fitting Position: Front Axle both sides
• Required quantity: 2
• paired article number: VKDY 326035
• Name: SK VKDY326035
• Manufacturer: SKF

• paired article number: 55 92 1563
• Length [mm]: 90
• Internal Thread Size: M14 x 1,5
• Material: Steel
• Fitting Position: Front Axle Right
• Weight [kg]: 0.398
• Supplementary Article/Supplementary Info: with lock nut
• Manufacturer: SWAG
• Name: SW 55 92 1564

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, both sides
• Thread Size 1: M16x1,5
• Thread Size 2: M14x1,5
• Axle Joint Length [mm]: 300
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• paired article number: 55 92 1564
• Length [mm]: 90
• Internal Thread Size: M14 x 1,5
• Material: Steel
• Fitting Position: Front Axle Left
• Weight [kg]: 0.398
• Supplementary Article/Supplementary Info: with lock nut
• Manufacturer: SWAG
• Name: SW 55 92 1563

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 600000
• Fitting Position: Front Axle Left
• paired article number: VKDY 316050
• Name: SK VKDY316049
• Manufacturer: SKF

• Vehicle Identification Number (VIN) from: 600000
• Fitting Position: Front Axle both sides
• Required quantity: 2
• paired article number: VKDY 326036
• Length [mm]: 340
• Thread Size: M16 x 1,5
• Supplementary Article/Supplementary Info: with synthetic grease
• Thread Size 1: M14 x 1,5
• Name: SK VKDY326036
• Manufacturer: SKF

• Fitting Position: Front Axle, Right, outer
• Cone Size [mm]: 15.3
• Thread Size 1: M10x1,25
• Thread Size 2: M14x1,5
• Supplementary Article/Supplementary Info: with accessories
• paired article number: JTE1073
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Left, outer
• Cone Size [mm]: 15.3
• Thread Size 2: M10x1,25
• Thread Size 1: M14x1,5
• Supplementary Article/Supplementary Info: with accessories
• paired article number: JTE1074
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, both sides
• Manufacturer: LEMFÖRDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Left, outer
• Cone Size [mm]: 15.3
• Thread Size 2: M10x1,25
• Thread Size 1: M14x1,5
• Supplementary Article/Supplementary Info: with accessories
• paired article number: 27613 01
• Manufacturer: LEMFÖRDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Right, outer
• Cone Size [mm]: 15.3
• Thread Size 1: M10x1,25
• Thread Size 2: M14x1,5
• Supplementary Article/Supplementary Info: with accessories
• paired article number: 27612 01
• Manufacturer: LEMFÖRDER

SVHC: No information available, please contact the manufacturer!