Manufacturer: MAGNETI MARELLI

Manufacturer: MAGNETI MARELLI

• Engine Code: B 4184 S, B4184S
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Number of pins: 2
• Housing Colour: white
• Sensor Type: NTC Sensor
• Diameter [mm]: 20
• Manufacturer: FAE

• Number of pins: 2
• Housing Colour: black
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Number of pins: 3
• Pressure from [kPA]: 15
• Pressure to [kPA]: 100
• Manufacturer: MEAT&DORIA

• Engine Code: B 4184 S3
• Supplementary Article/Supplementary Info: without gasket/seal
• Transmission Type: Manual Transmission
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: MAX

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Weight [kg]: 0.07
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

Manufacturer: MAGNETI MARELLI

• Engine Code: B 4184 S
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: VER

• Length [mm]: 1,038
• Number of circuits: 4
• Lambda Sensor: Thread pre-greased
• Fabrication Number: ESL-VV-000A

• Number of pins: 2
• Socket colour: black
• Cable Length [mm]: 210
• Thread Size: M12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19
• for OE number: 9125463
• Manufacturer: MEAT&DORIA

• Engine Code: B 4184 S
• Number of pins: 3
• Voltage [V]: 12
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX

• Engine Code: B 4184 S
• Warn Temperature [°C]: 120
• Thread Size: M12x1,5
• Spanner Size: 24
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Lambda Sensor: Lambda Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Length [mm]: 400
• Fitting Position: Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fabrication Number: ESL-MS-005
• Manufacturer: NTY

• Measuring Range from [kPa]: 15
• Measuring Range to [kPa]: 100
• Measuring Range from [V]: 0.21
• Measuring Range to [V]: 4.75
• Number of connectors: 3
• Manufacturer: VERNET

• not for country specific design: Canada, USA
• Length [mm]: 1,038
• Fabrication Number: ESL-VV-000
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• for OE number: 9 186 486
• Thread Size: M10
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Switch point from [°C]: 80
• Switch point to [°C]: 25
• Weight [kg]: 0.032
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: B 4184 S
• Housing Colour: black
• Thread Size: M10x1
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Number of pins: 5
• Connector Shape: D Shape
• Supplementary Article/Info 2: with integrated air temperature sensor
• Housing Type: with housing
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Country Specific Design: Canada, USA
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of pins: 3
• Connector Shape: oval
• Quality: OE EQUIVALENT
• Name: Andur, soidupedaaliasend
• Manufacturer: MD

• Number of circuits: 4
• Length [mm]: 1,060
• Conductor Number: 4
• Resistor [Ohm]: 6
• Cable Length [mm]: 1,060
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Number of pins: 3
• Operating Mode: Mechanical
• Rotation Direction: Clockwise rotation
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: DLP

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Fitting Position: Front, before catalytic converter
• not for country specific design: Canada, USA
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 1,040
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Weight [kg]: 0.014
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Number of pins: 3
• Manufacturer Restriction: AM-VERSION
• Manufacturer: METZGER

• Engine Code: B 4184 S
• Number of pins: 3
• Pressure from [kPA]: 20
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: DLP

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.14
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• Engine Code: B 4184 S, B 4184 S3
• Construction Year to: 07.1999
• Lambda Sensor: Regulating Probe, Lambda Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Sensor Type: Piezoelectric Sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MEY

• Engine Code: B 4184 S
• Lambda Sensor: Regulating Probe
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Engine Code: B 4184 S
• Supplementary Article/Info 2: for lead-free fuel
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Engine Code: B4184S3
• Number of pins: 5
• Suction pipe connector diameter [mm]: 70
• Quality class: PJ
• Name: Air flow sensor

• Fabrication Number: EPP-VV-003
• Manufacturer: NTY
• Lisainfo: VOLVO S40 I, V40 1.6/1.8/2.0 95-04 (5PIN)
• Additional information: VOLVO S40 I, V40 1.6/1.8/2.0 95-04 (5PIN)

• Cable Length [mm]: 470
• Lambda Sensor: Planar probe, Heated
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Number of pins: 3
• Pressure from [kPA]: 15
• Pressure to [kPA]: 100
• Manufacturer: FAE

• Pressure [Pa] from: 20,000
• Pressure [Pa] to: 100,000
• Voltage [V]: 5
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP009400221
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• not for country specific design: Canada, USA
• Fitting Position: before catalytic converter
• Cable Length [mm]: 1
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Construction Year from: 03.1996
• Engine Code: B4184S3
• Number of connectors: 5
• Housing Type: with housing
• Manufacturer: JP GROUP
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Engine Code: B 4184 S
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: EPS

• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,060
• Number of circuits: 4
• Weight [kg]: 0.17
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV561
• Manufacturer: ESEN SKV

• Engine Code: B 4184 S, B 4184 S3
• Construction Year to: 07.1999
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: B 4184 S
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: B 4184 S
• Manufacturer Restriction: DELPHI
• Pressure from [kPA]: 15
• Pressure to [kPA]: 102
• Output Voltage, from [V]: 0.261
• Output Voltage, up to [V]: 4.958
• Name: EP 1.993.001
• Manufacturer: EPS

• Lambda Sensor: Regulating Probe, Heated
• Construction Year from: 08.1997
• Length [mm]: 400
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Engine Code: B 4184 S
• Operating Mode: Pneumatic
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: PIE

• Construction Year from: 03.1996
• Construction Year to: 04.1999
• Engine Code: B 4184 S
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: B 4184 S
• Construction Year from: 01.1996
• Lambda Sensor: Regulating Probe
• Length [mm]: 1,040
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Construction Year from: 03.1996
• Engine Code: B4184S3
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Weight [kg]: 0.19
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year from: 03.1996
• Engine Code: B 4184 S3
• Number of pins: 5
• Manufacturer: MEAT&DORIA

• Construction Year from: 05.1999
• Engine Code: B 4184 S
• Lambda Sensor: Regulating Probe
• Length [mm]: 740
• Number of pins: 4
• Manufacturer: FAE

• Engine Code: B 4184 S3
• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI

• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Fitting Position: after catalytic converter
• Cable Length [mm]: 740
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PA358066091

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Lambda Sensor: Diagnostic Probe, Lambda Sensor, Heated
• Fitting Position: after catalytic converter
• Alternatively:
• Cable Length [mm]: 760
• Manufacturer: DELPHI

• Engine Code: B4184S3
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Engine Code: B 4184 S
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe
• Construction Year from: 04.1999
• Transmission Type: Manual Transmission
• Vehicle Identification Number (VIN) to: 800053
• Number of pins: 4
• Cable Length [mm]: 740
• Manufacturer: METZGER

• Engine Code: B 4184 S, B 4184 S3
• Construction Year to: 07.1999
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Engine Code: B 4184 S3, B 4184 S
• Number of pins: 5
• Colour: black
• Manufacturer: VDO