Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Number of circuits: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: KAMOKA
-
Lambda Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Construction Year from: 06.1998
-
Line insulation design: with silicone-
coated woven- fibre insulation - Cable Length [mm]: 600
- Number of circuits: 4
- Socket colour: grey
- Number of pins: 4
- Weight [kg]: 0.169
- Length [mm]: 725
- for OE number: 12 79 9169
- Connector Shape: rectangular
-
Thread Size: M18 x 1,
5 -
Lambda Sensor: Diagnostic Probe,
Thread pre- greased - Exhaust System: after catalytic converter
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Lambda Sensor: Regulating Probe,
Lambda Sensor - Construction Year to: 07.1998
- Exhaust System: before catalytic converter
- Voltage [V]: 12
- Length [mm]: 630
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.11
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV042
- Engine Code: B 5234 T6
- Construction Year to: 07.1998
-
Line insulation design: with silicone-
coated woven- fibre insulation - Number of pins: 4
- Socket colour: black
- Number of circuits: 4
- Connector Shape: rectangular
- Cable Length [mm]: 730
-
Thread Size: M18 x 1,
5 - Weight [kg]: 0.013
- for OE number: 993 606 127 01
- Length [mm]: 850
-
Lambda Sensor: Diagnostic Probe,
Thread pre- greased - Exhaust System: after catalytic converter
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 08.1998
- Construction Year to: 03.2000
-
Lambda Sensor: Diagnostic Probe,
Heated - Fitting Position: after catalytic converter
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Lisainfo: MGS-
615 -
Additional information: MGS-
615
- Construction Year to: 07.1998
-
Lambda Sensor: Regulating Probe,
Heated - Fitting Position: Exhaust Manifold
- Number of pins: 4
- Cable Length [mm]: 640
- for article number: 81543E
- Quality: OE EQUIVALENT
- Manufacturer: MEAT&DORIA
- Construction Year from: 05.1997
- Construction Year to: 06.1998
- Transmission Type: Manual Transmission
-
Supplementary Article/Info 2: for lead-
free fuel -
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 103
- Gross Weight [g]: 152
- Manufacturer: DENSO
-
Name: DN DOX-
0117 - Quality class: Q
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"
- Cable Length [mm]: 550
-
Lambda Sensor: Planar probe,
Heated - Manufacturer: DELPHI
- Construction Year to: 07.1998
-
Lambda Sensor: Regulating Probe,
Heated - Supplementary Article/Info 2: for leaded fuel
- Fitting Position: before catalytic converter
- Length [mm]: 500
- Number of pins: 4
- Technical Information Number: Universal 77004
- Manufacturer: FAE
- Lambda Sensor: Heated
- Cable Length [mm]: 640
- Manufacturer: FAST
- Engine Code: B 5234 T6
- Construction Year from: 08.1998
-
Lambda Sensor: Diagnostic Probe,
Heated, Thread pre- greased - Fitting Position: after catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation - Conductor Number: 4
- Connector Shape: angular
-
Thread Size: 18x1,
5 - Length [mm]: 400
- Number of circuits: 4
- Version: ZR PLANAR
- Weight [kg]: 0.163
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Lambda Sensor: Diagnostic Probe,
Planar probe, Heated - Fitting Position: after catalytic converter
- Block Separation:
- Construction Year from: 08.1998
- Cable Length [mm]: 680
- Manufacturer: DELPHI
-
Name: DE ES20341-
12B1
- Vehicle Identification Number (VIN) from: 342001
-
Lambda Sensor: Diagnostic Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 720
- Weight [kg]: 0.114
- Name: SW 33 10 3191
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 08.1998
- Lambda Sensor: Diagnostic Probe
- Voltage [V]: 12
- Length [mm]: 765
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.15
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV639
- Construction Year from: 08.1998
-
Lambda Sensor: Diagnostic Probe,
Unheated - Number of pins: 4
- Cable Length [mm]: 540
- Quality: OE EQUIVALENT
- Manufacturer: MEAT&DORIA
- Construction Year to: 06.1998
-
Line insulation design: with silicone-
coated woven- fibre insulation - Conductor Number: 4
- Cable Length [mm]: 630
-
Thread Size: M18x1,
5 - Length [mm]: 670
- Number of connectors: 4
- Housing Colour: black
-
Lambda Sensor: Heated,
Thread pre- greased - Weight [kg]: 0.142
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 07.1998
- Fitting Position: before catalytic converter
- Engine Code: B 5234 T3
-
Line insulation design: with silicone-
coated woven- fibre insulation - Number of pins: 4
- for OE number: V99760001
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Length [mm]: 350
- Exhaust System: after catalytic converter
- Manufacturer: VEMO GERMANY
Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 07.1998
-
Lambda Sensor: Regulating Probe,
Diagnostic Probe -
Supplementary Article/Info 2: for lead-
free fuel, for leaded fuel - Block Separation:
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
Fitting Position: before catalytic converter, after catalytic converter
- Construction Year from: 08.1998
- Construction Year to: 03.2000
- Lambda Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Lambda Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
- Fitting Position: Front
- Length [mm]: 770
- Number of connectors: 4
- Manufacturer: VERNET
- Construction Year to: 12.1998
- Fitting Position: before catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Lambda Sensor: Planar probe,
Heated, Thread pre- greased - Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: B 5234 T3
- Fitting Position: after catalytic converter
- Cable Length [mm]: 250
- Conductor Number: 4
- Number of circuits: 4
- Name: EP 1.998.235
- Manufacturer: EPS
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased
- Construction Year from: 06.1998
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
-
Name: DN DOX-
0150 - Quality class: Q
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Lambda Sensor: Lambda Sensor
- Guarantee: 3 years guarantee
- Weight [kg]: 0.23
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV400
-
Lambda Sensor: Regulating Probe,
Finger probe, Heated - Fitting Position: before catalytic converter
- Cable Length [mm]: 317
- Manufacturer: DELPHI
- Lambda Sensor: Lambda Sensor
- Cable Length [mm]: 510
- Number of circuits: 4
- Manufacturer: ERA
- Construction Year from: 08.1998
- Construction Year to: 03.2000
- Lambda Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
- Overall Length [mm]: 665
- Available as universal article as well, see article no.: 0258986615
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Construction Year from: 06.1998
- for OE number: 1367825
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 770
- Number of pins: 4
- Weight [g]: 131
- Gross Weight [g]: 164
- Manufacturer: DENSO
-
Name: DN DOX-
2021 - Quality class: Q
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
C70 I COUPE, 03.97-0
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
C70 I COUPE, 03.97-0
(kvaliteediklass: Q)"
- Engine Code: B 5234 T6
- Construction Year to: 07.1998
-
Lambda Sensor: Regulating Probe,
Planar probe, Thread pre- greased - Fitting Position: Exhaust Manifold
-
Line insulation design: with silicone-
coated woven- fibre insulation - Length [mm]: 400
- Number of pins: 4
- Weight [kg]: 0.124
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 06.1998
-
Lambda Sensor: Diagnostic Probe,
Heated, Thread pre- greased -
Line insulation design: with silicone-
coated woven- fibre insulation - Length [mm]: 660
- Weight [kg]: 0.012
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Line insulation design: with silicone-
coated woven- fibre insulation - Number of pins: 4
- Number of circuits: 4
- Socket colour: black
- Connector Shape: angular
- Weight [kg]: 0.142
- for OE number: 8 631 668
-
Thread Size: M18 x 1,
5 - Length [mm]: 650
-
Lambda Sensor: Heated,
Diagnostic Probe, Thread pre- greased -
Version: ZR-
PLANAR - Exhaust System: after catalytic converter
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Cable Length [mm]: 600
-
Lambda Sensor: Lambda Sensor,
Heated - Manufacturer: DELPHI
-
Name: DE ES10923-
12B1
- Construction Year to: 07.1998
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
-
Supplementary Article/Info 2: for lead-
free fuel - Number of circuits: 4
- Overall Length [mm]: 530
- Available as universal article as well, see article no.: 0258986505
-
Recommended change interval [km]: 160,
000 - Manufacturer: BOSCH
- Lambda Sensor: Lambda Sensor
- Voltage [V]: 12
-
Length [mm]: 1,
000 - Guarantee: 3 years guarantee
- Number of circuits: 5
- Weight [kg]: 0.19
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV854
-
Lambda Sensor: Regulating Probe,
Lambda Sensor - Construction Year from: 08.1998
- Construction Year to: 07.1999
- Engine Code: B 5234 T6
- Voltage [V]: 12
- Length [mm]: 500
- Guarantee: 3 years guarantee
- Number of circuits: 5
- Weight [kg]: 0.15
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV862
- Manufacturer: ESEN SKV
-
Lambda Sensor: Regulating Probe,
Lambda Sensor - Construction Year from: 08.1999
- Voltage [V]: 12
- Length [mm]: 750
- Guarantee: 3 years guarantee
- Number of circuits: 5
- Weight [kg]: 0.16
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV856
- Manufacturer: ESEN SKV
- Engine Code: B 5234 T6
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Lambda Sensor: Thread pre-
greased -
Overall Length [mm]: 1,
230 - Number of pins: 5
-
Recommended change interval [km]: 250,
000 - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Lambda Sensor: Regulating Probe,
Lambda Sensor - Construction Year from: 08.1999
- Voltage [V]: 12
- Length [mm]: 580
- Guarantee: 3 years guarantee
- Number of circuits: 5
- Weight [kg]: 0.16
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ESEN SKV
- Construction Year from: 08.1999
-
Exhaust System: for pre-
catalytic converter -
Cable Length [mm]: 1,
200 -
Lambda Sensor: Lambda Sensor,
Heated - Manufacturer: DELPHI
- Lambda Sensor: Lambda Sensor
- Voltage [V]: 12
- Length [mm]: 435
- Guarantee: 3 years guarantee
- Number of circuits: 5
- Weight [kg]: 0.14
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ESEN SKV
- Engine Code: B 5234 T6
- Construction Year from: 08.1998
- Construction Year to: 07.1999
-
Lambda Sensor: Regulating Probe,
Thread pre- greased - Fitting Position: Exhaust Manifold
-
Line insulation design: with silicone-
coated woven- fibre insulation - Conductor Number: 5
- Connector Shape: angular
-
Thread Size: M18 x 1,
5 - Overall Length [mm]: 410
- Number of pins: 5
-
Recommended change interval [km]: 160,
000 - Weight [kg]: 0.133
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 08.1999
- Construction Year to: 03.2000
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 5
-
Overall Length [mm]: 1,
230 -
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Construction Year from: 08.1998
- Construction Year to: 07.1999
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 5
- Overall Length [mm]: 530
-
Recommended change interval [km]: 160,
000 - Manufacturer: BOSCH