• Brake Size: 15", 16"
• Fitting Position: Front Axle
• Brake System: Teves
• Manufacturer: JP GROUP
• Lisainfo: Accessory Kit, disc brake pads
• Additional information: Accessory Kit, disc brake pads

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Manufacturer Restriction: ATE
• Net weight [kg]: 0.03

• Fitting Position: Rear Axle
• Manufacturer Restriction: ATE
• Net weight [kg]: 0.07
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: NK

• Fitting Position: Rear Axle
• Brake System: ATE
• Weight [kg]: 0.07

• Fitting Position: Front Axle
• Brake System: ATE
• Weight [kg]: 0.1

• Fitting Position: Front Axle
• Brake System: ATE
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Fitting Position: Front Axle
• Brake System: ATE
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: AUT

• Fitting Position: Front Axle
• Brake System: ATE
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Rear Axle
• Brake System: ATE
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Rear Axle
• Brake System: ATE
• for OE number: 271831
• Manufacturer: AUTOFREN REPERATURKI
• Name: SE D4-2383A

• Fitting Position: Rear Axle
• Brake System: ATE
• Quantity: 6
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LX0039
• Quality class: PJ

Lisainfo: "Tootja: DELPHI
740 (744), 04.83-08.
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Rear Axle
• Brake System: ATE (Teves)
• Manufacturer: FRENKIT
• Name: FR 901159

• Fitting Position: Rear Axle
• Brake System: ATE (Teves)
• Manufacturer: FRENKIT
• Name: FR 900980

• Fitting Position: Rear Axle
• Manufacturer Restriction: ATE
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Brake System: ATE
• Quality class: PJ
• Name: Brake pads fitting kit

• Brake System: ATE
• Name: Vedru, Pidurisadul
• Manufacturer: ATE
• Lisainfo: 11.8116-0356.1
• Additional information: 11.8116-0356.1

• Fitting Position: Front Axle
• Manufacturer Restriction: ATE
• Spring Design: Wire Spring
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Brake System: Teves
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Brake System: ATE
• Quantity: 2
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
850 (LS), 06.91-10.9
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
850 (LS), 06.91-10.9
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: METZGER

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Brake System: ATE
• Manufacturer: METZGER

• Fitting Position: Front Axle Left, Front Axle Right
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Fabrication Number: HCA-VV-009
• Manufacturer: NTY

• Fitting Position: Front Axle Left
• Inner Diameter [mm]: 112
• Outer Diameter [mm]: 185
• paired article number: 131-07-170
• Colour: silver
• Material: Sheet Steel
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Construction Year to: 12.1998
• Fitting Position: Front Axle
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Name: Brake dust shield left
• Quality class: PJ

Lisainfo: VOLVO 850, 92- (kvaliteediklass PJ)

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-VV-006

• Construction Year from: 11.1996
• Construction Year to: 06.1999
• paired article number: 19-3448
• Fitting Position: Rear Axle Left
• Name: Plekk,piduriketas
• Manufacturer: MAX

• Construction Year from: 11.1996
• Construction Year to: 06.1999
• paired article number: 19-3447
• Fitting Position: Rear Axle Right
• Name: Plekk,piduriketas
• Manufacturer: MAX

• Fitting Position: Front Axle Left
• Fabrication Number: HTO-VV-005
• paired article number: HTO-VV-006
• Manufacturer: NTY
• Name: NTY HTO-VV-005

• Fitting Position: Front Axle Right
• Fabrication Number: HTO-VV-006
• paired article number: HTO-VV-005
• Manufacturer: NTY
• Name: NTY HTO-VV-006

• Construction Year from: 11.1996
• Construction Year to: 06.1999
• Fitting Position: Rear Axle Left
• paired article number: 57SKV695
• Weight [kg]: 0.6
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 57SKV694

• Name: Brake dust shield right
• Quality class: PJ

Lisainfo: VOLVO 850, 92- (kvaliteediklass PJ)

• Name: Brake dust shield left
• Quality class: PJ

Lisainfo: VOLVO 850, 92- (kvaliteediklass PJ)

• Construction Year from: 11.1996
• Construction Year to: 06.1999
• Fitting Position: Rear Axle Right
• paired article number: 57SKV694
• Weight [kg]: 0.6
• Warranty: 3 years warranty
• Name: CE 57SKV695
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle Right
• Material: Sheet Steel
• Surface: Zinc-coated
• Fabrication Number: HTO-VV-002
• paired article number: HTO-VV-001
• Manufacturer: NTY
• Name: NTY HTO-VV-002

• Fitting Position: Rear Axle Left
• Material: Sheet Steel
• Surface: Zinc-coated
• Fabrication Number: HTO-VV-001
• paired article number: HTO-VV-002
• Manufacturer: NTY
• Name: NTY HTO-VV-001

• Fitting Position: Right, Front Axle
• Diameter 1 [mm]: 185
• Diameter 2 [mm]: 112
• Material: Sheet Steel
• Name: CFD 614105
• Manufacturer: DACO

• Construction Year from: 11.1996
• Construction Year to: 06.1999
• Fitting Position: Front Axle Right
• paired article number: 57SKV180
• Weight [kg]: 0.2
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 57SKV181

• Construction Year from: 11.1996
• Construction Year to: 06.1999
• Fitting Position: Front Axle Left
• paired article number: 57SKV181
• Weight [kg]: 0.2
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 57SKV180

• Fitting Position: Rear Axle Right
• Manufacturer: JP GROUP

• Fitting Position: Rear Axle Left
• Manufacturer: JP GROUP

• Name: Brake dust shield right
• Quality class: PJ

Lisainfo: VOLVO 850, 92- (kvaliteediklass PJ)

• Fitting Position: Rear Axle Right
• paired article number: 8125 27206
• Diameter 1/ Diameter 2 [mm]: 336/47
• Name: Plekk,piduriketas
• Manufacturer: TRI

• Fitting Position: Rear Axle Left
• paired article number: 8125 27207
• Diameter 1/ Diameter 2 [mm]: 336/47
• Name: Plekk,piduriketas
• Manufacturer: TRI

• Fitting Position: Left, Front Axle
• Diameter 1 [mm]: 185
• Diameter 2 [mm]: 112
• Material: Sheet Steel
• Name: CFD 614104
• Manufacturer: DACO

• Construction Year from: 11.1996
• Construction Year to: 06.1999
• Fitting Position: Rear Axle Left
• Colour: black
• Material: Sheet Steel
• Surface: Cathodic Painting
• paired article number: BSP-8909R
• Diameter 1/ Diameter 2 [mm]: 336/47
• Manufacturer: OPTIMAL ZAWIESZENIE

• Construction Year from: 11.1996
• Construction Year to: 06.1999
• Fitting Position: Rear Axle Right
• Colour: black
• Material: Sheet Steel
• Surface: Cathodic Painting
• paired article number: BSP-8909L
• Diameter 1/ Diameter 2 [mm]: 336/47
• Manufacturer: OPTIMAL ZAWIESZENIE

• Diameter 1/ Diameter 2 [mm]: 185/112
• Fitting Position: Front Axle Right
• Net weight [kg]: 0.26
• Name: PLEKK,PIDURIKETAS
• Manufacturer: NK

• Diameter 1/ Diameter 2 [mm]: 185/112
• Fitting Position: Front Axle Left
• Net weight [kg]: 0.26
• Name: PLEKK,PIDURIKETAS
• Manufacturer: NK

• Construction Year from: 01.1999
• Fitting Position: Front
• Length [mm]: 1,000
• Number of pins: 2
• Plug Type: Female
• Voltage [V]: 12
• Weight [kg]: 0.09
• Operating Mode: Electric
• Warranty: 3 years warranty
• Socket colour: black
• Manufacturer: SKV GERMANY
• Name: CE 06SKV281

• Fitting Position: Rear Axle Right
• Diameter 1/ Diameter 2 [mm]: 336/47
• not for trim level: 4 WD
• Surface: Zinc-coated

• Fitting Position: Rear Axle Left
• Diameter 1/ Diameter 2 [mm]: 336/47
• not for trim level: 4 WD
• Surface: Zinc-coated

• Fitting Position: Front Axle Right
• paired article number: 8125 27105
• Diameter 1/ Diameter 2 [mm]: 185/112
• Name: Plekk,piduriketas
• Manufacturer: TRI

• Fitting Position: Front Axle Left
• paired article number: 8125 27106
• Diameter 1/ Diameter 2 [mm]: 185/112
• Name: Plekk,piduriketas
• Manufacturer: TRI

• Fitting Position: Front Axle
• Required quantity: 2
• Fitting Depth [mm]: 33.4
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI
• Lisainfo: VOLVO
• Additional information: VOLVO

• Fitting Position: Rear Axle Left
• Surface: Phosphatized, Painted
• paired article number: 57611
• Diameter 1/ Diameter 2 [mm]: 45 / 330
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Right
• Material: Sheet Steel
• Surface: Zinc-coated
• paired article number: 58831
• Diameter 1/ Diameter 2 [mm]: 110 / 285
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle Right
• Surface: Phosphatized, Painted
• paired article number: 57610
• Diameter 1/ Diameter 2 [mm]: 45 / 330
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Right
• paired article number: 6115223
• Material: Sheet Steel
• Surface: Cathodic Painting
• Manufacturer: METZGER

• Fitting Position: Front Axle
• Construction Year to: 08.1998
• Sensor Type: Hall Sensor
• Manufacturer: METZGER

• Fitting Position: Front Axle Left
• Diameter 1/ Diameter 2 [mm]: 185/112
• Surface: Zinc-coated

• Required quantity: 2
• Fitting Position: Rear Axle
• Cable Length [mm]: 1,866, 1,251
• Fitting Depth [mm]: 45.2
• Number of pins: 4
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Construction Year to: 12.1998
• Fitting Position: Rear Axle
• Sensor Type: Inductive Sensor
• Number of pins: 4
• Cable Length [mm]: 1,860
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Length [mm]: 1,855
• Fabrication Number: HCA-VV-007
• Manufacturer: NTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-VV-008
• Manufacturer: NTY

• Fitting Position: Rear Axle both sides
• Length [mm]: 189
• Number of pins: 4
• Colour: black
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 06SKV538

• Model Year to: 1998
• Sensor Type: Inductive Sensor
• Cable Length [mm]: 0
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Fitting Position: Front Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Fitting Position: Rear Axle, Rear
• Construction Year from: 01.1997
• Construction Year to: 12.1998
• Production date to: 1998
• Length [mm]: 1,230
• Number of pins: 4
• Plug Type: Male
• Voltage [V]: 12
• Weight [kg]: 0.34
• Colour: yellow
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 06SKV236

• Construction Year from: 01.1997
• Construction Year to: 12.1998
• Required quantity: 1
• Fitting Position: Rear Axle
• Length [mm]: 1,840
• MAPP code available:
• Manufacturer: ATE

• Fitting Position: Right, Left, Front Axle
• Cable Length [mm]: 1,050
• Manufacturer: SNR /NTN-SNR/
• Name: SN ASB165.03

• Fitting Position: Front Axle
• Construction Year from: 01.1999
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,035
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Fitting Position: Front Axle Left, Front Axle Right
• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20227

• Fitting Position: Rear Axle
• Required quantity: 2
• Cable Length [mm]: 1,866, 1,251
• Fitting Depth [mm]: 45.2
• Number of pins: 4
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Front Axle
• Required quantity: 2
• Production date from: 1999
• Cable Length [mm]: 985
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Right, Left, Front Axle
• Manufacturer: SNR /NTN-SNR/
• Name: SN ASB165.07

• Fitting Position: Rear Axle Right
• paired article number: 6115149
• Material: Sheet Steel
• Manufacturer: METZGER

• Fitting Position: Rear Axle Left
• paired article number: 6115150
• Material: Sheet Steel
• Manufacturer: METZGER

• Construction Year from: 01.1999
• Required quantity: 2
• Fitting Position: Front Axle
• Length [mm]: 1,000
• MAPP code available:
• Manufacturer: ATE

• Model Year to: 1998
• Sensor Type: Inductive Sensor
• Cable Length [mm]: 1,220, 1,840
• Number of pins: 4
• Fitting Position: Rear Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Sensor Type: Passive sensor
• Number of occupied pins: 4
• Cable Length [mm]: 1,870
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20176

• Fitting Position: Rear Axle
• Construction Year from: 01.1999
• Sensor Type: Active sensor
• Number of occupied pins: 4
• Cable Length [mm]: 1,945
• Manufacturer: DELPHI