• Fabrication Number: ECT-TY-002
• Manufacturer: NTY
• Name: NTY ECT-TY-002

• Switch Pressure [bar]: 0.5
• Thread Size: M14x1.5
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET
• Additional information: OS3561 VERNET
• Lisainfo: OS3561 VERNET

• Supplementary Article/Info 2: with plug
• Number of wires (repair kit, cable set): 2
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Engine Code: B 5244 T3
• Pressure [bar]: 1
• Thread Size: M14x1,5
• Spanner Size: 24
• Name: EP 1.800.056
• Manufacturer: EPS

• Vehicle Identification Number (VIN) from: 48000
• Number of pins: 2
• Sensor Type: NTC Sensor
• Colour Coding: green
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: M 14x1,5
• Manufacturer: FAE

• Construction Year to: 12.2000
• Switch point from [bar]: 0.4
• Switch point to [bar]: 0.6
• External Thread Size: M14 x 1,5
• Spanner Size: 24
• Number of connectors: 1
• Colour: brown
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 12.2000
• Switch point from [bar]: 0.4
• Switch point to [bar]: 0.6
• External Thread Size: M14 x 1,5
• Spanner Size: 24
• Number of connectors: 1
• Colour: brown
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 55 91 5076

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Production date from: 2002
• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: J8942220010
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Construction Year to: 04.2001
• Thread Size: M12x1.5
• Supplementary Article/Info 2: with cable
• Manufacturer: VERNET
• Additional information: WS3062 VERNET
• Lisainfo: WS3062 VERNET

• Vehicle Identification Number (VIN) from: 48000
• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: M12*1,5
• Name: NI 207056
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Number of pins: 1
• Switch pressure from [bar]: 0.39
• Switch pressure to [bar]: 0.58
• Thread Size: M 14 x 1,5
• Colour: black
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: METZGER

• Spanner Size: 19 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connecting thread: M12 x 1,5
• Manufacturer: ERA

• Production date to: 2001
• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 125
• Socket colour: black
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 9125463
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Engine Code: B 5244 T3
• Vehicle Identification Number (VIN) from: 48000
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Housing Colour: green
• Supplementary Article/Supplementary Info: with seal
• Thread Size: M12x1,5
• Weight [kg]: 0.032
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 210
• Housing Colour: black
• Spanner Size: 19
• Manufacturer: KAMOKA

• Vehicle Identification Number (VIN) from: 48000
• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 280
• Supplementary Article/Supplementary Info: with seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M12x1,5
• Colour: green
• Sensor Type: NTC Sensor
• Number of pins: 2
• Colour Coding: grey
• Corresponds to the original part in colour: green
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107481

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Model Year to: 2001
• Block Separation:
• Vehicle Identification Number (VIN) to: 47999
• Housing Colour: black
• Number of pins: 2
• Thread Size: M 12X1.5-6g
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10493
• Additional information: TS10493 DEL
• Lisainfo: TS10493 DEL

• Construction Year from: 05.2001
• Thread Size: M12x1.5
• Manufacturer: VERNET

• Colour: green
• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Vehicle Identification Number (VIN) to: 47999
• Number of pins: 2
• Sensor Type: NTC Sensor
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Spanner Size: 19
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Length [mm]: 210
• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Weight [kg]: 0.05
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 210
• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Weight [kg]: 0.05
• Supplementary Article/Info 2: with seal ring
• Name: SW 55 92 8611
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE
• Additional information: 33178 NRF
• Lisainfo: 33178 NRF

• Height [mm]: 30.1
• Resistor [Ohm]: 130
• Number of connectors: 2
• Manufacturer: VERNET

• Number of connectors: 2
• Weight [kg]: 0.032
• for OE number: 31331765
• Name: SW 33 11 0550
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: MAGNETI MARELLI

• Engine Code: B 5244 T3
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: EP 1.830.304
• Manufacturer: EPS

• Vehicle Identification Number (VIN) from: 48000
• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Vehicle Identification Number (VIN) to: 47999
• Mounting Type: Bolted
• Voltage [V]: 12
• Thread Size: M12x1,5
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PT009309461
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Supplementary Article/Info 2: with cable
• Manufacturer: FAE

• Production date to: 2001
• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Manufacturer: BREMI

• Quantity: 1
• Vehicle Identification Number (VIN) from: 48000
• Block Separation:
• Model Year from: 2002
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11464

• Number of connectors: 2
• Weight [kg]: 0.049
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Production date to: 2001
• Vehicle Identification Number (VIN) to: 47999
• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Manufacturer: BREMI
• Additional information: BRE60484
• Lisainfo: BRE60484

• Vehicle Identification Number (VIN) from: 48000
• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Number of connectors: 3
• Weight [kg]: 0.025
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 01.2002
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 130
• Weight [kg]: 0.04
• Manufacturer: VALEO
• Name: VA 254072
• Lisainfo: VAL254072
• Additional information: VAL254072

• Vehicle Identification Number (VIN) from: 48000, 171000
• Block Separation:
• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE SS11017

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Engine Code: B 5244 T3
• Construction Year from: 01.2002
• Alternatively:
• Number of pins: 2
• Alternative Repair Kit: 550434
• Fitting Depth [mm]: 30
• Manufacturer: ERA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Construction Year from: 01.2002
• Engine Code: B5244T3
• Weight [kg]: 0.039
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE

• Housing Type: with housing
• Transmission Type: 6-Speed Automatic Transmission
• Fabrication Number: EPP-VV-001
• Manufacturer: NTY

• Number of pins: 2
• Manufacturer: METZGER

• Voltage [V]: 12
• Number of pins: 2
• Connector Shape: oval
• Shape: straight
• Colour: black
• Fitting Position: Charge Air Cooler
• Charge Type: for vehicles with charge air cooler
• Manufacturer: METZGER

• Vehicle Identification Number (VIN) from: 48000
• Resistor [Ohm]: 155
• Fitting Depth [mm]: 30
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PU009167001

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Vehicle Identification Number (VIN) to: 47999
• Cable Length [mm]: 300
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU013122841
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Vehicle Identification Number (VIN) to: 47999
• Required quantity: 1
• Cable Length [mm]: 350
• Number of pins: 2
• Weight [g]: 46
• Country Specific Design: Japan
• not for country specific design: Japan
• Gross Weight [g]: 73
• Manufacturer: DENSO
• Name: DN DCPS0112

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV909

• Vehicle Identification Number (VIN) from: 48000
• Required quantity: 1
• Number of pins: 2
• Weight [g]: 31
• Country Specific Design: Japan
• not for country specific design: Japan
• Gross Weight [g]: 58
• Manufacturer: DENSO
• Name: DN DCPS0114

• Engine Code: B 5244 T3
• Vehicle Identification Number (VIN) to: 172999
• Lambda Sensor: Diagnostic Probe
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Number of pins: 2
• Housing Colour: black
• Sensor Type: Inductive Sensor
• Manufacturer: FAE

• Number of pins: 5
• Housing Type: without housing
• Manufacturer: JP GROUP
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Model Year to: 2001
• Number of pins: 5
• Housing Type: with housing
• Manufacturer: JP GROUP
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Construction Year from: 08.2001
• Construction Year to: 07.2002
• Manufacturer: BOSCH

• Construction Year from: 08.2001
• Construction Year to: 07.2002
• Quality class: PJ
• Name: Air flow sensor

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Quantity: 1
• Vehicle Identification Number (VIN) to: 172999
• Vehicle Identification Number (VIN) from: 48000
• Cable Length [mm]: 1
• Manufacturer: DELPHI
• Name: DE ES20635-12B1

Fabrication Number: ESS-VV-000

• Vehicle Identification Number (VIN) to: 47999
• Lambda Sensor: Diagnostic Probe
• Exhaust System: after catalytic converter
• Required quantity: 1
• Length [mm]: 770
• Number of connectors: 4
• Manufacturer: VERNET

• Housing Type: with housing
• Housing material: Plastic
• Number of pins: 5
• Supplementary Article/Info 2: with integrated grille
• Recommended additional repairs: Air Filter
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Manufacturer: MEAT&DORIA

• Vehicle Identification Number (VIN) to: 47999
• Number of pins: 2
• Fitting Depth [mm]: 36.5
• Supplementary Article/Info 2: with cable
• Manufacturer: METZGER

• Engine Code: B 5244 T3
• Vehicle Identification Number (VIN) to: 172999
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Diagnostic Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Weight [kg]: 0.26
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Cable Length [mm]: 485
• Number of pins: 4
• Manufacturer: DELPHI

• Construction Year from: 09.2000, 08.2001
• Construction Year to: 07.2002
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Weight [kg]: 0.26
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year to: 07.2002
• Manufacturer: BOSCH

• Construction Year from: 08.2001
• Construction Year to: 07.2002
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 07.2001
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• for OE number: 9186934
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Required quantity: 1
• Vehicle Identification Number (VIN) from: 48000
• Vehicle Identification Number (VIN) to: 172999
• Cable Length [mm]: 750
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PA358103161

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: B 5244 T3
• Length [mm]: 500
• Cable Length [mm]: 570
• Name: EP 1.957.131
• Manufacturer: EPS

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.23
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

Manufacturer: MAGNETI MARELLI

• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Vehicle Identification Number (VIN) to: 47999
• Vehicle Identification Number (VIN) from: 48000
• Cable Length [mm]: 2
• Manufacturer: DELPHI
• Name: DE ES10957-12B1

• Fitting Position: after catalytic converter
• Required quantity: 1
• Vehicle Identification Number (VIN) from: 173000
• Lambda Sensor: Diagnostic Probe
• Cable Length [mm]: 660
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for OE number: 8658471
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• Construction Year from: 08.2001
• Construction Year to: 07.2002
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Construction Year to: 07.2001
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• for OE number: 9186934
• Number of circuits: 4
• Overall Length [mm]: 790
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Engine Code: B 5244 T3
• Model Year from: 2002
• Housing Type: without housing
• Number of pins: 5
• New Part:
• Used part return not required:
• Recommended additional repairs: Air Filter
• Weight [kg]: 0.055
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 8670398
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: with housing
• Manufacturer: BREMI

• for OE number: 1367825
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 770
• Number of pins: 4
• Weight [g]: 131
• Gross Weight [g]: 164
• Manufacturer: DENSO
• Name: DN DOX-2021

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
C70 I COUPE, 03.97-0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
C70 I COUPE, 03.97-0
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe, Heated
• Length [mm]: 1,200
• Number of circuits: 5
• Resistor [Ohm]: 4.2
• Conductor Number: 5
• Cable Length [mm]: 1,200
• Manufacturer: MAGNETI MARELLI