• Fabrication Number: ECP-AR-013
• Manufacturer: NTY

• Number of pins: 3
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Operating Mode: Mechanical
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: MAX

• Alternatively:
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Weight [kg]: 0.024
• Alternative Repair Kit: 550144
• Manufacturer: ERA

• Number of connectors: 3
• Manufacturer: VERNET

• Construction Year to: 08.1996
• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Flange Hole Diameter [mm]: 8
• for OE number: 5946 21, 004 153 90 28, 89615 05010
• Manufacturer: MEAT&DORIA

• Construction Year to: 08.1996
• Manufacturer: BOSCH

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Weight [kg]: 0.07
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 17SKV101
• Manufacturer: ESEN SKV

• Number of pins: 3
• Voltage [V]: 12
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX

Manufacturer: MAGNETI MARELLI

Manufacturer: MAGNETI MARELLI

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Connector/Clamp: Connector may need adjustment
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-UV-000
• Manufacturer: NTY

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: BOS

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Length [mm]: 215
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Length [mm]: 160
• Number of pins: 3
• Weight [kg]: 0.09
• Manufacturer: ERA

• Construction Year from: 08.1996
• Lambda Sensor: Regulating Probe, Finger probe
• Supplementary Article/Info 2: for leaded fuel
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-505
• Additional information: MGS-505

• Construction Year to: 07.1996
• Lambda Sensor: Regulating Probe, Heated
• Supplementary Article/Info 2: for lead-free fuel
• Vehicle Identification Number (VIN) to: 821
• Block Separation:
• Vehicle Identification Number (VIN) from: 822
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Construction Year to: 07.1996
• Lambda Sensor: Regulating Probe, Heated
• Supplementary Article/Info 2: for leaded fuel
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Supplementary Article/Info 2: with potentiometer
• Manufacturer: METZGER

• Construction Year from: 08.1996
• Engine Code: B5204S
• Quality class: PJ
• Name: Air flow sensor

• Construction Year from: 08.1996
• Number of pins: 4
• Housing Type: with housing
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Construction Year from: 09.1996
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0117
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Construction Year from: 09.1996
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Length [mm]: 630
• Number of circuits: 4
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV042
• Manufacturer: ESEN SKV

• Construction Year from: 08.1996
• Lambda Sensor: Regulating Probe, Heated
• Supplementary Article/Info 2: for leaded fuel
• Fitting Position: before catalytic converter
• Length [mm]: 500
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Vehicle Identification Number (VIN) to: 70018
• Supplementary Article/Info 2: for lead-free fuel
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
SCORPIO I SEDAN (GGE
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SCORPIO I SEDAN (GGE
(kvaliteediklass: Q)"

• Vehicle Identification Number (VIN) from: 70019
• Supplementary Article/Info 2: for lead-free fuel
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 100
• Gross Weight [g]: 149
• Manufacturer: DENSO
• Name: DN DOX-0120
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"

• Vehicle Identification Number (VIN) from: 70019
• Supplementary Article/Info 2: for lead-free fuel
• Exhaust System: for pre-catalytic converter
• for OE number: 16287S
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 540
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 133
• Name: DN DOX-1535
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor

• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Slider
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Cable Length [mm]: 640
• Lambda Sensor: Heated
• Manufacturer: FAST

• Construction Year from: 08.1996
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Supplementary Article/Info 2: for leaded fuel
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 07.1996
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Supplementary Article/Info 2: for lead-free fuel
• Vehicle Identification Number (VIN) to: 821
• Block Separation:
• Vehicle Identification Number (VIN) from: 822
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 08.1996
• Voltage [V]: 12
• Number of pins: 5
• Name: Ohumassimootja
• Manufacturer: MAX

• Operating Mode: Pneumatic
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: PIE

• Construction Year to: 07.1996
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Supplementary Article/Info 2: for leaded fuel
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 07.1996
• Vehicle Identification Number (VIN) from: 822
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 570
• Number of pins: 4
• Technical Information Number: Universal 77008
• Manufacturer: FAE

Manufacturer: MAGNETI MARELLI

• Construction Year from: 08.1996
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Cable Length [mm]: 160
• Sensor Type: Hall Sensor
• Manufacturer: METZGER

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Length [mm]: 180
• Manufacturer: FAE

• Voltage [V]: 12
• Length [mm]: 160
• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

Manufacturer: BOSCH

• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 822
• Model Year to: 1995
• Cable Length [mm]: 530
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358103391
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.