Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Length [mm]: 107
- Outer Diameter [mm]: 35
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 41
- Spanner Size: 18
- Screw length below head [mm]: 97
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.1
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Block Separation:
- Vehicle configuration line / variant: BlueMotion
Suspension: for vehicles with sports suspension, for vehicles with electronic suspension control, for vehicles with standard suspension
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- not for vehicle configuration line / variant: BlueMotion
- Manufacturer: JP GROUP
- Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
-
Axle: Four-
Link Axle
- Fitting Position: Front Axle
- General Information: Spring support; front spring disc
- Manufacturer: BORSEHUNG
- Quantity: 2
- Fitting Position: Rear Axle
- General Information: spring support; down
- Manufacturer: BORSEHUNG
- for OE number: N10211201
- Name: Rattakalde korrektuurkruvi
- Manufacturer: MAX
for PR number: 0BD, 0BE, 0BF, 0BG, 0BM, 0BN, 0BP, 0N4, 1X0, 2H0, 2H4, 2H5, 8Q0, 8Q1, 8Q5
- Quantity per packing unit: 5
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Rear Axle Upper,
both sides - Thread Size: M 12
- Thread Pitch [mm]: 1.5
- Screw length below head [mm]: 82
- Overall Length [mm]: 94
- Bolt Head-/Nut Design: Male Hex
- Surface: Zink flake coated
- Strength class: 10.9
- Axle: Independent wheel suspension
- Name: Rattakalde korrektuurkruvi
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fabrication Number: ZWT-
VW- 034SK - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Weight [kg]: 0.127
- Packaging length [cm]: 10.1
- Packaging width [cm]: 2.6
- Packaging height [cm]: 2.6
- Manufacturer: FEBEST
- for PR number: 0N4
- Weight [kg]: 0.107
- Packaging length [cm]: 9.2
- Packaging width [cm]: 3.4
- Packaging height [cm]: 3.4
- Manufacturer: FEBEST
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Rear Axle Upper,
both sides - Thread Size: M 12
- Screw length below head [mm]: 82
- Overall Length [mm]: 94
- Strength class: 10.9
- Axle: Independent wheel suspension
-
Supplementary Article/Info 2: with nut,
with protect screen - Name: Rattakalde korrektuurkruvi
- Manufacturer: MAX
- Weight [kg]: 0.117
- Height [mm]: 70
- Required quantity: 2
- Fitting Position: Front Axle
-
Name: ODBàJ AMORT. VW P. ALTEA/
OCTAVIA Z OSON¤ - Manufacturer: TED
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Rear Axle Lower,
both sides - Thread Size: M 12
- Screw length below head [mm]: 97
- Overall Length [mm]: 109
- Strength class: 10.9
- Axle: Independent wheel suspension
- Name: Rattakalde korrektuurkruvi
- Manufacturer: MAX
- Length [mm]: 92.2
- Outer Diameter [mm]: 35
-
External Thread Size: M12 x 1,
5 - Spanner Size: 18
- Shaft Length [mm]: 32.8
- Screw length below head [mm]: 81
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.136
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
Rear Axle Left, Rear Axle Right - Axle: Independent wheel suspension
- Vehicle Equipment: for vehicles without reinforced shock absorbers
- Suspension: for vehicles without electronic suspension control
- Chassis Type: High chassis
- Name: COC 49495773
- Manufacturer: CORTECO
-
Supplementary Article/Info 2: with protective cap/
bellow - Required quantity: 2
- Fitting Position: Front Axle
- Weight [kg]: 0.124
- Manufacturer: TEDGUM
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Rear Axle - Suspension: for vehicles with standard suspension
-
for PR number: 0K0,
1JA, 1JC, 1JD - Name: COC 49483041
- Manufacturer: CORTECO
-
Engine Code: CZDA,
CZEA - Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.24
-
Name: Montaa§ikomplekt,
roolissteem - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Vehicle configuration line / variant: BlueMotion
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
-
Fitting Position: Front Axle,
Front Axle Left, Front Axle Right - Name: COC 49495777
- Manufacturer: CORTECO
- Fitting Position: Rear Axle
- for OE number: 5Q0 513 425 D
- Manufacturer: MAX
Name: ZESTAW MONTA½OWY AMORTYZATORA SKODA T. SUPERB III (3V3) 1.4 TSI 15- (ODBOJEONY)
- Suspension: for vehicles with electronic suspension control
- only in connection with: 803010
-
Axle: Twist-
beam Rear Axle - Fitting Position: Rear Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- not for vehicle configuration line / variant: BlueMotion
- Quantity per axle: 2
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
- Suspension: for vehicles with bad road version
- Fitting Position: Front Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
-
Fitting Position: Front Axle Left,
Front Axle Right -
Fabrication Number: AD-
VW- 034 - Manufacturer: NTY
-
Name: NTY AD-
VW- 034
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Weight [kg]: 0.141
- Packaging length [cm]: 10.7
- Packaging width [cm]: 3.4
- Packaging height [cm]: 3.4
- Manufacturer: FEBEST
- Quantity: 2
- Construction Year from: 05.2015
-
Construction Year to: 11.2014,
05.2015 - Fitting Position: Front Axle
- General Information: Rubber and dust cover kit; front
- Manufacturer: VIKA
- Fitting Position: Front Axle
- Lisainfo: Top Strut Mounting
- Additional information: Top Strut Mounting
- Suspension: for vehicles with sports suspension
- only in connection with: 803010
-
Axle: Four-
Link Axle - Fitting Position: Rear Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
-
Fitting Position: Front Axle,
Front Axle both sides - not for vehicle configuration line / variant: Bluemotion
- Suspension: for vehicles with standard suspension
- Quality class: PJ
- Name: Shock absorber protection kit left+right
- Fitting Position: Rear Axle
- for OE number: 5Q0 513 425 F
- Manufacturer: MAX
Name: ZESTAW MONTA½OWY AMORTYZATORA SEAT T. LEON (5F1) 1.6 TDI 13- (ODBOJEONY)
- Fitting Position: Rear Axle
- only in connection with: 803 010
-
Axle: Four-
Link Axle - Block Separation:
- Manufacturer: JP GROUP
Suspension: for vehicles with standard suspension, for vehicles with bad road version
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Fabrication Number: AD-
VW- 035 - Supplementary Article/Info 2: without bearing
- Manufacturer: NTY
-
Fitting Position: Front Axle Left,
Front Axle Right -
Fabrication Number: AD-
VW- 033 - Manufacturer: NTY
-
Name: NTY AD-
VW- 033
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Suspension: for vehicles with bad road version
- only in connection with: 803010
-
Axle: Four-
Link Axle - Fitting Position: Rear Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
- Width [mm]: 127
- Thickness [mm]: 40
- Inner Diameter [mm]: 78
- Outer Diameter [mm]: 127
-
Material: Plastic,
Metal - Bearing Type: Rolling Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.31
- Manufacturer: FEB
- Lisainfo: 44799 FEBI
- Additional information: 44799 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - Kndmik VW P. A3/LEON/OCTAVIA/GOLF VII/SPORTSVAN 12- LE/PR
- Axle: Rigid Axle
- Fitting Position: Rear Axle
- Manufacturer: KAMOKA
Suspension: for vehicles with standard suspension, for vehicles with sports suspension
- for OE number: 5Q0511351C
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [g]: 204
- Component Number: 2
- Name: IM 51041
- Manufacturer: ORIGINAL IMPERIUM
- Axle: Rigid Axle
- Fitting Position: Rear Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
Suspension: for vehicles with standard suspension, for vehicles without sports suspension, for vehicles without increased ground clearance, for vehicles without electronic suspension control
- Suspension: for vehicles with standard suspension
- not for vehicle configuration line / variant: BlueMotion
- only in connection with: 803009
-
Axle: Twist-
beam Rear Axle - Fitting Position: Rear Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
- Axle: Rigid Axle
- Fitting Position: Rear Axle
- Manufacturer: ASHIKA
Suspension: for vehicles with standard suspension, for vehicles without sports suspension, for vehicles without increased ground clearance, for vehicles without electronic suspension control
- Fitting Position: Front Axle
- Supplementary Article/Info 2: without bearing
-
Mounting Type: Rubber-
Metal Mount - Required quantity: 2
- replacement in pairs recommended:
- Name: Vedruamordi tugilaager
- Manufacturer: MEY
- Axle: Rigid Axle
- Fitting Position: Rear Axle
- Manufacturer: JAPKO
Suspension: for vehicles with standard suspension, for vehicles without sports suspension, for vehicles without increased ground clearance, for vehicles without electronic suspension control
- for OE number: 5Q0511357Q
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [g]: 227
- Component Number: 2
- Name: IM 50341
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Rear Axle
- Vehicle configuration line / variant: Blue Motion
-
Axle: Twist-
beam Rear Axle - Block Separation:
- Manufacturer: JP GROUP
Suspension: for vehicles with standard suspension, for vehicles with sports suspension
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- not for vehicle configuration line / variant: Blue Motion
-
Axle: Twist-
beam Rear Axle - Manufacturer: JP GROUP
-
for model code: BQ1,
5G1 - Block Separation:
- Fitting Position: Front Axle
- Inner Diameter [mm]: 78
- Outer Diameter [mm]: 127
- Height [mm]: 40
- Bearing Type: Ball Bearing
-
Name: Laager -
Kndmik VW P. AUDI, SKODA - Manufacturer: MEY
- Lisainfo: 1006410020
- Additional information: 1006410020
-
Fitting Position: Right,
Left, Rear Axle - Number of Parts [parts]: 1
-
Manufacturer: SNR /
NTN- SNR/ - Name: SN KB954.09
- Fitting Position: Rear Axle
- Suspension: for vehicles with electronic suspension control
-
Axle: Twist-
beam Rear Axle
- Fitting Position: Front Axle
- Quantity per axle: 2
-
Name: Laager,
amorditugilaager - Manufacturer: SKF
- Quantity: 2
- Fitting Position: Rear Axle
- Weight [kg]: 0.34
- Required quantity: 2
- Thickness [mm]: 60
- Inner Diameter [mm]: 10
- Material: Aluminium
-
Mounting Type: Rubber-
Metal Mount - General Information: Shock absorber upper cover
- Manufacturer: VIKA
- for PR number: G15
- for OE number: 1K0412303B
- Fitting Position: Front Axle
- Weight [kg]: 0.303
- Packaging length [cm]: 19.7
- Packaging width [cm]: 15.4
- Packaging height [cm]: 7.7
- Manufacturer: FEBEST
- Fitting Position: Front Axle
- Quantity per packing unit: 2
- Manufacturer: KAVO PARTS
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: without bearing
- Required quantity: 2
- replacement in pairs recommended:
- Name: Vedruamordi tugilaager
- Manufacturer: MEY
Suspension: for vehicles with sports suspension, for vehicles with standard suspension
- Required quantity: 2
- Weight [kg]: 0.415
- Supplementary Article/Info 2: without bearing
- Fitting Position: Rear Axle
- Manufacturer: TEDGUM
- Name: TG TED22900
- for OE number: 1K0412303M
- Fitting Position: Front Axle
- Weight [kg]: 0.316
- Packaging length [cm]: 20.4
- Packaging width [cm]: 15.2
- Packaging height [cm]: 7.7
- Manufacturer: FEBEST
- Inner Diameter [mm]: 14
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.8
- Supplementary Article/Info 2: without ball bearing
- Observe service information:
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - Kndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!BEZ O½YSKA!!!
- Suspension: for vehicles with standard suspension
- not for vehicle configuration line / variant: BlueMotion
- Fitting Position: Front Axle
- Quantity Unit: Set
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MEY
- Inner Diameter 1 [mm]: 74
- Outer Diameter 1 [mm]: 127
-
Fitting Position: Front Axle Right,
Front Axle Left - Name: SN M257.03
- Manufacturer: SNR
-
Material: Plastic,
Metal - Bearing Type: Rolling Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Outer Diameter [mm]: 127
- Inner Diameter [mm]: 78
-
Name: Laager,
amorditugilaager - Manufacturer: MAX
- Fitting Position: Front Axle
- Inner Diameter [mm]: 78.5
- Outer Diameter [mm]: 127.5
- Bearing Type: Ball Bearing
- SVHC: No SVHC present!
- Manufacturer: FAG
- Fitting Position: Rear Axle
-
Vehicle type: support. hole -
11mm - for OE number: 5Q0513353H
- Weight [kg]: 0.4
- Supplementary Article/Info 2: without rolling bearing
- Guarantee: 5 years guarantee
- Packaging length [cm]: 13.6
- Packaging width [cm]: 11.8
- Packaging height [cm]: 11.4
- Manufacturer: MONROE
- Fitting Position: Front Axle
-
for OE number: 1K0412303B,
1K0412303AA - Manufacturer: KAMOKA AMORTYZATORY
- Additional information: 2019212 KAMOKA
- Lisainfo: 2019212 KAMOKA
- Fitting Position: Rear Axle both sides
- Thickness [mm]: 60
- Weight [kg]: 0.34
- Required quantity: 2
- Material: Aluminium
- Inner Diameter [mm]: 10
-
Mounting Type: Rubber-
Metal Mount - Manufacturer: METALCAUCHO
- Quantity: 2
- Construction Year from: 05.2015
- Construction Year to: 05.2015
- Fitting Position: Front Axle
- General Information: Rubber and dust cover kit; front
- Manufacturer: VIKA
- Fitting Position: Front Axle
- General Information: Rubber and dust cover kit; front
- Manufacturer: VIKA
-
Engine Code: CZDA,
CZEA - Axle: Rigid Axle
- Suspension: for vehicles without electronic suspension control
- Inner Diameter [mm]: 12
- Height [mm]: 55
- Material: Aluminium
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.3
- Supplementary Article/Info 2: without ball bearing
- Observe service information:
- Name: Vedruamordi tugilaager
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- Alternative Repair Kit: 37574 01
- Manufacturer: LMI
for OE number: 5Q0 412 331 C, 5Q0 412 331 D, 5Q0 412 331 E, 5QD 412 331 A, 5QD 412 331 C Name: Laager - Kndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- BEZ O½YSKA
-
Fitting Position: Front Axle Left,
Front Axle Right, Upper -
Mounting Type: Rubber-
Metal Mount - Alternative Repair Kit: 118 038
- Quantity per axle: 2
- Consult accessories list for recommended additional repairs:
- Supplementary Article/Info 2: without rolling bearing
- Replace in pairs only:
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for PR number: 0N4
-
Axle: Four-
Link Axle - Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- General Information: Shock absorber upper cover
- Manufacturer: VIKA
- Fitting Position: Rear Axle
- Quantity per packing unit: 2
- Manufacturer: KAVO PARTS
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- Alternative Repair Kit: 803 024
- Name: Vedruamordi tugilaager
- Manufacturer: SAA
for OE number: 5Q0 412 331 C, 5Q0 412 331 D, 5Q0 412 331 E, 5QD 412 331 A, 5QD 412 331 C
- Quantity: 2
- Fitting Position: Rear Axle
- General Information: Rubber and dust cover kit; rear
- Manufacturer: VIKA
-
Lisainfo: 5Q0511357H/
KPL VIKA -
Additional information: 5Q0511357H/
KPL VIKA
- Inner Diameter [mm]: 14
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.8
- Supplementary Article/Info 2: without ball bearing
- Name: SW 30 94 0171
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity: 2
- Fitting Position: Rear Axle
- General Information: Rubber and dust cover kit; rear
- Manufacturer: VIKA
-
Fitting Position: Front Axle Left,
Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 14
- Supplementary Article/Info 2: without rolling bearing
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for PR number: G02
- for OE number: 1K0412303E
- Fitting Position: Front Axle
- Weight [kg]: 0.288
- Packaging length [cm]: 20
- Packaging width [cm]: 15.6
- Packaging height [cm]: 7.8
- Manufacturer: FEBEST
- Quantity: 2
- Fitting Position: Rear Axle
- General Information: Rubber and dust cover kit; rear
- Manufacturer: VIKA
-
Engine Code: CHPB,
CZDA, CZEA -
for PR number: 0K0,
1JA, 1JC, 1JD - Fitting Position: Rear Axle
- Manufacturer: BILSTEIN
-
Name: BI 12-
281442 - Quality class: Q
- Quantity: 2
- Fitting Position: Rear Axle
- General Information: Rubber and dust cover kit; rear
- Manufacturer: VIKA
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
-
for OE number: 5Q0 412 249 E,
5Q0 412 249 F - Manufacturer: LMI
Name: Laager - Kndmik VW P. A3/LEON/OCTAVIA/GOLF VII/SPORTSVAN 12- LE/PR
- Fitting Position: Front Axle
- Weight [kg]: 0.33
- Packaging length [cm]: 12.7
- Packaging width [cm]: 12.7
- Packaging height [cm]: 3.8
- Manufacturer: FEBEST
- Fitting Position: Rear Axle
- General Information: Rubber and dust cover kit;rear
- Manufacturer: VIKA
- Fitting Position: Rear Axle
- Manufacturer: KAMOKA
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
-
for OE number: 5Q0 412 249 E,
5Q0 412 249 F -
Name: Laager,
amorditugilaager - Manufacturer: SAA
- Fitting Position: Front Axle
- Supplementary Article/Info 2: without bearing
- for OE number: 5Q0412331F
- Manufacturer: SASIC
- Weight [kg]: 0.8
- Fitting Position: Front Axle
- Required quantity: 2
- Inner Diameter [mm]: 14
-
Mounting Type: Rubber-
Metal Mount - Supplementary Article/Info 2: without ball bearing
- General Information: Shock absorber top rubber; front
- Manufacturer: BORSEHUNG
-
Engine Code: CZDA,
CZEA - Axle: Rigid Axle
- for PR number: UC7
- Length [mm]: 133
-
Material: PU
(Polyurethane), Thermoplast - Fitting Position: Rear Axle
- Weight [kg]: 0.392
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: FEB
- Additional information: FE175365
- Lisainfo: FE175365
Suspension: for vehicles with lifted suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles with standard suspension
-
Axle: Twist-
beam Rear Axle -
Fitting Position: Rear Axle Left,
Rear Axle Right - Observe dimensions:
- Support plate diameter [mm]: 11.2
- Quantity per axle: 2
- for OE number: 5Q0 513 353 H
- Housing diameter pressure stop [mm]: 56
- Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Manufacturer: LEMFORDER
-
Production date from: 01/
13 -
Mounting Type: Rubber-
Metal Mount - Fitting Position: Rear Axle
- Inner Diameter [mm]: 60
- for OE number: 5Q0513353G
- Manufacturer: SASIC
- Suspension: for vehicles with standard suspension
-
Axle: Twist-
beam Rear Axle -
Fitting Position: Rear Axle Left,
Rear Axle Right - Observe dimensions:
- Support plate diameter [mm]: 11.2
- Quantity per axle: 2
- for OE number: 5Q0 513 353 H
- Housing diameter pressure stop [mm]: 56
- Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Name: Vedruamordi tugilaager
- Manufacturer: SAA
- Fitting Position: Rear Axle
-
Article number of recommended accessories: 532865,
531430 - Axle: Rigid Axle
- Suspension: for vehicles with standard suspension
- Manufacturer: GSP ZAWIESZENIE
- for PR number: 0N4
-
Axle: Four-
Link Axle -
Fitting Position: Rear Axle Left,
Rear Axle Right - Observe dimensions:
- Support plate diameter [mm]: 10.2
- Quantity per axle: 2
- Housing diameter pressure stop [mm]: 60.5
- Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Manufacturer: LEMFORDER
- Name: LMI 3741701
for OE number: 5Q0 513 353 E, 5Q0 513 353 G, 5Q0 513 353 J, 5QD 513 353, 5QD 513 353 B
- for PR number: 0N4
-
Axle: Four-
Link Axle -
Fitting Position: Rear Axle Left,
Rear Axle Right - Observe dimensions:
- Support plate diameter [mm]: 10.2
- Quantity per axle: 2
- Housing diameter pressure stop [mm]: 60.5
- Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Name: Vedruamordi tugilaager
- Manufacturer: SAA
for OE number: 5Q0 513 353 E, 5Q0 513 353 G, 5Q0 513 353 J, 5QD 513 353, 5QD 513 353 B
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Material: Aluminium
- Weight [g]: 431
- Thickness [mm]: 60
- Inner Diameter [mm]: 10
- Name: IM 37975
- Manufacturer: ORIGINAL IMPERIUM
- Quantity: 2
- Thickness [mm]: 40
- Width [mm]: 127
- Weight [kg]: 0.31
- Bearing Type: Rolling Bearing
- Inner Diameter [mm]: 78
- Outer Diameter [mm]: 127
-
Material: Plastic,
Metal - Required quantity: 2
- Fitting Position: Front Axle
- General Information: deep groove ball thrust bearing; front
- Manufacturer: BORSEHUNG
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Manufacturer: SNR
- Name: SN KB954.08
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [g]: 809
- Supplementary Article/Info 2: without bearing
- Component Number: 2
- Name: IM 37649
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Front Axle
- SVHC: No SVHC present!
-
Manufacturer: FAG-
ELEMENTY ZAWIESZENIA
-
Fitting Position: Front Axle Left,
Front Axle Right - Suspension: for vehicles with sports suspension
- for PR number: G02
- not for vehicle production country: Mexico
- Manufacturer: SACHS
- Axle: Independent wheel suspension
- Suspension: for vehicles without electronic suspension control
- Fitting Position: Rear Axle
- Manufacturer: KAVO PARTS
- Fitting Position: Front Axle
- Quantity per packing unit: 2
- Weight [kg]: 0.337
- Guarantee: 5 years guarantee
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Manufacturer: MONROE ODBOJE I OSLONY
- Fitting Position: Rear Axle
- Quantity Unit: Set
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MEY
Suspension: for vehicles with standard suspension, for vehicles with bad road version
- Suspension: for vehicles with standard suspension
-
Axle: Four-
Link Axle - Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount - Material: Aluminium
- Manufacturer: METZGER
- Fitting Position: Rear Axle
- Weight [kg]: 0.4
- Manufacturer: DENCKERMANN AMORTYZATORY
-
Fitting Position: Front Axle Left,
Front Axle Right - Suspension: for vehicles without bad road version
- not for vehicle production country: Mexico
- Construction Year to: 07.2016
-
for PR number: G02,
2UF, G03 - Required quantity: 1
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: SAA
-
Fitting Position: Front Axle Left,
Front Axle Right -
for PR number: G17,
G21 - Manufacturer: SACHS AMORTYZATORY
- Axle: Independent wheel suspension
- Suspension: for vehicles without electronic suspension control
- Fitting Position: Rear Axle
- Manufacturer: KAYABA PK SM ZESTAWY
- Name: KY SM9925
- Additional information: SM9925
- Lisainfo: SM9925
Technical Information: mounting (x1) / / / Fastenings : suspension mounting bolt/screw (x2), mounting washer (x4)
- Axle: Rigid Axle
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: KYB
Suspension: for vehicles with standard suspension, for vehicles without sports suspension, for vehicles without increased ground clearance, for vehicles without electronic suspension control
- Quantity: 2
- Fitting Position: Front Axle
- Quantity Unit: Kit
- General Information: Rubber and dust cover kit; front; 2 pcs
- Manufacturer: BORSEHUNG
- Fitting Position: Front Axle
- Weight [kg]: 0.357
- Packaging length [cm]: 17.2
- Packaging width [cm]: 16.6
- Packaging height [cm]: 8.3
- Manufacturer: FEBEST
-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left -
Manufacturer: AUTO-
GH
- Fitting Position: Front Axle
- Manufacturer: DENCKERMANN AMORTYZATORY
- Axle: Rigid Axle
- Fitting Position: Rear Axle
- Manufacturer: KYB
- Name: KY SM9924
Suspension: for vehicles with standard suspension, for vehicles with sports suspension Technical Information: mounting (x1) / / / Fastenings : suspension mounting bolt/screw (x2), mounting washer (x4)
- Quantity: 2
- Fitting Position: Rear Axle
- Quantity Unit: Kit
- General Information: Rubber and dust cover kit; rear; 2 pcs
- Manufacturer: BORSEHUNG
- Quantity: 2
- Fitting Position: Front Axle
- Quantity Unit: Kit
- General Information: Rubber and dust cover kit; front; 2 pcs
- Manufacturer: BORSEHUNG
-
for model code: BQ1,
5G1 - Fitting Position: Front Axle
- Supplementary Article/Info 2: with ball bearing
- Manufacturer: MEY
- Lisainfo: 1006410141
- Additional information: 1006410141
Name: Laager - Kndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!Z O½YSKIEM!!!
- Construction Year to: 03.2017
- Axle: Independent wheel suspension
- Fitting Position: Rear Axle
-
Name: BI 12-
281459 - Manufacturer: BILSTEIN
- Quality class: Q
- Fitting Position: Front Axle
- Manufacturer: KAMOKA
-
Engine Code: CZDA,
CZEA, DGXA - Suspension: for vehicles without electronic suspension control
-
for PR number: G02,
G05 - for combined PR number: G02+2UC
- Block Separation:
- Length [mm]: 172
- Width [mm]: 74
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.216
-
Name: Puhver,
vedrustus - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 01.2017
-
Fitting Position: Front Axle Left,
Front Axle Right -
Name: Remondikomplekt,
vedruamordi tugilaager - Manufacturer: MAX
- Fitting Position: Front Axle
- Quantity per axle: 2
- General Information: SKF recommends always changing in pairs both sides
- Manufacturer: SKF
Name: PODUSZKA AMORT. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- Z O½YSKIEM
- Engine Code: CZDA
- Suspension: for vehicles with electronic suspension control
- for PR number: G27
- Fitting Position: Front Axle
- Weight [kg]: 0.35
- for OE number: 5Q0 412 303 C S1
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with rolling bearing
- Quantity per axle: 2
- Replace in pairs only:
- for components see parts list:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Construction Year to: 01.2017
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- Manufacturer: LMI
SVHC: No information available, please contact the manufacturer! Name: Laager - Kndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!Z O½YSKIEM!!!
- for PR number: G25
- Model Year from: 2017
- Fitting Position: Front Axle
- Weight [kg]: 0.397
- for components see parts list:
- Packaging length [cm]: 20
- Packaging width [cm]: 15
- Packaging height [cm]: 7.6
- Manufacturer: FEBEST
- Number of Parts [parts]: 2
-
Article number of the recommended special tool: Clas :
OM1112, Clas : OP3231 -
Fitting Position: Front Axle Right,
Front Axle Left - Manufacturer: SNR
- Name: SN KB657.27
- Additional information: KB657.27 SNR
- Lisainfo: KB657.27 SNR
-
Engine Code: CZDA,
CZEA, DGXA -
Axle: Multi-
link Axle - Block Separation:
- for PR number: 1JA
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.402
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: FEB
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control, for vehicles without sports suspension General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity: 2
- Fitting Position: Rear Axle
- Quantity Unit: Kit
- General Information: Rubber and dust cover kit; rear; 2 pcs
- Manufacturer: BORSEHUNG
-
Engine Code: CZDA,
CZEA - for combined PR number: G02+2UF
- Block Separation:
- Construction Year to: 07.2016
-
for PR number: G03,
G36 -
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.335
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: FEB
Suspension: for vehicles with lifted suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Supplementary Article/Info 2: without ball bearing
- Manufacturer: BILSTEIN
-
Name: BI 12-
243945
-
Fitting Position: Front Axle Left,
Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 14
- Supplementary Article/Supplementary Info: with integrated ball bearing
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Axle: Independent wheel suspension
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Height of bump stop [mm]: 127
- Manufacturer: KYB
- Name: KY 910332
- Additional information: 910332 KYB
- Lisainfo: 910332 KYB
Suspension: for vehicles with standard suspension, for vehicles without sports suspension, for vehicles without increased ground clearance, for vehicles without electronic suspension control
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with ball bearing
- Manufacturer: BIL
- Quality class: Q
Name: Laager - Kndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- LE/PR LE/PR B1
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.1
- Supplementary Article/Info 2: with ball bearing
- Observe service information:
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - Kndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!Z O½YSKIEM!!!
- Fitting Position: Rear Axle
- Quantity per packing unit: 2
- Weight [kg]: 0.473
- Guarantee: 5 years guarantee
- Packaging length [cm]: 9.5
- Packaging width [cm]: 30
- Packaging height [cm]: 18
- Manufacturer: MONROE ODBOJE I OSLONY
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: GSP ZAWIESZENIE
-
Engine Code: CZDA,
CZEA, DGXA -
Axle: Multi-
link Axle - Block Separation:
- for PR number: 1JA
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.402
- Name: SW 33 10 9154
- Manufacturer: SWAG
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control, for vehicles without sports suspension General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- SVHC: No SVHC present!
-
Manufacturer: FAG-
ELEMENTY ZAWIESZENIA
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.1
- Supplementary Article/Info 2: with ball bearing
- Observe service information:
- Name: SW 30 94 5529
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.3
- Supplementary Article/Info 2: with ball bearing
- Observe service information:
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - Kndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!Z O½YSKIEM I RUBAMI!!!
- Quantity: 2
- Fitting Position: Front Axle
- General Information: Shock absorber rubber kit; front
- Manufacturer: BORSEHUNG
- Fitting Position: Front Axle
- Weight [kg]: 1.3
- Supplementary Article/Info 2: with rolling bearing
- Guarantee: 5 years guarantee
- Packaging length [cm]: 15.1
- Packaging width [cm]: 8.4
- Packaging height [cm]: 14.6
- Manufacturer: MONROE
- Fitting Position: Front Axle
- Name: KY SM1051
- Manufacturer: KYB
Technical Information: Suspension mounting (x1), separated bearing (x1) / / / Fastenings : piston rod nut (x1), suspension mounting bolt/screw (x3)
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.3
- Supplementary Article/Info 2: with ball bearing
- Observe service information:
- Name: SW 30 94 5497
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 01.2017
- Fitting Position: Front Axle both sides
- Weight [kg]: 1.1
- Inner Diameter [mm]: 14
- Supplementary Article/Info 2: with rolling bearing
- Manufacturer: METALCAUCHO
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks