• for PR number: G25, G27
• not for PR number: G24, G25, G27
• Fitting Position: Front Axle Left, Front Axle Right
• Lisainfo: Protective Cap/Bellow, shock absorber
• Additional information: Protective Cap/Bellow, shock absorber

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AB-VW-009
• Manufacturer: NTY

• Suspension: for vehicles with electronic suspension control
• for combined PR number: 0N1+1JP, 0N1+UC7
• Block Separation:
• Fitting Position: Rear Axle
• Material: Thermoplast
• Height [mm]: 267
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Axle: Rigid Axle
• Suspension: for vehicles without electronic suspension control
• for PR number: 1JA, 1JC, 1JD
• Block Separation:
• Length [mm]: 266.4
• Width [mm]: 57
• Fitting Position: Rear Axle
• Weight [kg]: 0.04
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Bellows Material: Thermoplast
• Height [mm]: 173
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Axle: Rigid Axle
• for PR number: 1JP, UC7
• Block Separation:
• Length [mm]: 269
• Material: Thermoplast
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.056
• Manufacturer: FEBI BILSTEIN

Suspension: for vehicles with electronic suspension control, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Height [mm]: 230
• Material: Thermoplast
• Weight [g]: 70
• Diameter 1 [mm]: 59
• Diameter 2 [mm]: 66
• Name: IM 37969
• Manufacturer: ORIGINAL IMPERIUM

• Axle: Multi-link Axle
• Thickness [mm]: 230
• Material: Thermoplast
• Fitting Position: Rear Axle Left, Rear Axle Right
• Name: SW 30 94 5893
• Manufacturer: SWAG
• Lisainfo: 30 94 5893 SWA
• Additional information: 30 94 5893 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Axle: Multi-link Axle
• Thickness [mm]: 230
• Material: Thermoplast
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.07
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 172
• Material: Thermoplastic polyester elastomer
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.07
• Manufacturer: FEBI BILSTEIN
• Lisainfo: 46720 FEBI
• Additional information: 46720 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Block Separation:
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA
• Lisainfo: 2000753 KAMOKA
• Additional information: 2000753 KAMOKA

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control, for vehicles without increased ground clearance

• Fitting Position: Rear Axle
• Length [mm]: 647
• Length 2 [mm]: 404
• Shock Absorber Design: Damper Module
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Diameter 1 [mm]: 38
• Diameter 2 [mm]: 25
• Spring Type: for vehicles with coil spring suspension
• Name: MM 7465G
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Rear Axle
• Article number of recommended accessories: PK424
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Design: Suspension Strut
• Name: CFD 560205
• Manufacturer: DACO

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Piston Rod Diameter [mm]: 13
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: DENCKERMANN AMORTYZATORY

Suspension: for vehicles with increased ground clearance, for vehicles without standard suspension, for vehicles without sports suspension, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Suspension: for vehicles without electronic suspension control
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Axle: Twist-beam Rear Axle
• Shock Absorber Design: Suspension Strut
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Telescopic Shock Absorber
• Piston Rod Diameter [mm]: 13
• Socket Width 1 [mm]: 56
• Manufacturer: JAPKO

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• for PR number: 0N1
• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Axle: Rigid Axle
• Shock Absorber System: Twin-Tube
• Quality class: PJ
• Name: Gas shock absorber

Suspension: for vehicles without electronic suspension control, for vehicles with bad road version

• Vehicle type: 0N4
• for PR number: 0N4
• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Vehicle Equipment: for vehicles without leveling control
• Shock Absorber System: Twin-Tube
• Quality class: PJ
• Name: Gas shock absorber

Suspension: for vehicles without electronic suspension control, for vehicles with bad road version, for vehicles with sports suspension, for vehicles with standard suspension

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Max. Length [mm]: 625
• Name: CFD 560208
• Manufacturer: DACO

Suspension: for vehicles with standard suspension, for vehicles with increased ground clearance, for vehicles with sports suspension, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Diameter [mm]: 45
• Length [mm]: 630
• Manufacturer: KAVO

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Name: CFD 560210
• Manufacturer: DACO

Suspension: for vehicles with increased ground clearance, for vehicles without sports suspension, for vehicles without electronic suspension control, for vehicles without standard suspension

• for PR number: 0N1, 1JA, 1JC, 0K0
• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Piston Rod Diameter [mm]: 11
• Axle: Rigid Axle
• Shock Absorber System: Twin-Tube
• Quality class: PJ
• Name: Gas shock absorber

Suspension: for vehicles without electronic suspension control, for vehicles with sports suspension, for vehicles with standard suspension

• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Manufacturer: ABAKUS DEPO/LORO

Suspension: for vehicles with bad road version, for vehicles without electronic suspension control General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle
• Length [mm]: 549
• Length 2 [mm]: 382
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Plate
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 50
• Diameter 2 [mm]: 32
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI
• Additional information: 7521G MM
• Lisainfo: 7521G MM

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Diameter [mm]: 50
• Max. Length [mm]: 550
• Shock Absorber Mounting Type: Top pin

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: AUTO-GH

• for PR number: 0N1, 0N4, G07, G11, G16, G21, G24
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Length 2 [mm]: 548
• Suspension Strut Outer Diameter [mm]: 50
• Shock Absorber System: Twin-Tube
• Quality class: PJ
• Name: Gas shock absorber

Suspension: for vehicles without electronic suspension control, for vehicles with bad road version, for vehicles with sports suspension, for vehicles with standard suspension

• Fitting Position: Front Axle
• Housing Diameter [mm]: 50
• Shock Absorber Type: Gas Pressure
• Article number of recommended accessories: SMJ0196
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Suspension Strut
• Manufacturer: JAPKO

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control

• Vehicle type: 0N4
• for PR number: 0N1, G02, G06, G25, G28, G29, G32
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Length 2 [mm]: 548
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Twin-Tube
• Quality class: PJ
• Name: Gas shock absorber

Suspension: for vehicles without electronic suspension control, for vehicles with bad road version, for vehicles with sports suspension, for vehicles with standard suspension

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Mounting bores distance [mm]: 59
• replacement in pairs recommended:
• Manufacturer: MEYLE
• Lisainfo: 1267250017
• Additional information: 1267250017

Suspension: for vehicles with sports suspension, for vehicles with standard suspension

• Axle: Rigid Axle
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Piston Rod Diameter [mm]: 13
• Diameter shock absorber eyelet [mm]: 45
• Max. Length [mm]: 650
• Manufacturer: KAYABA
• Name: KY 3448025

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control General Information: Please refer to the technical drawing in "Documents"

• Axle: Rigid Axle, Multi-link Axle
• Block Separation:
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Piston Rod Diameter [mm]: 13
• Diameter shock absorber eyelet [mm]: 59
• Max. Length [mm]: 625
• Manufacturer: KYB
• Name: KY 3448024

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control, for vehicles with standard suspension, for vehicles with increased ground clearance General Information: Please refer to the technical drawing in "Documents"

• Axle: Rigid Axle
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Piston Rod Diameter [mm]: 11
• Diameter shock absorber eyelet [mm]: 45
• Manufacturer: KAYABA
• Name: KY 3430023

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control General Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Sleeve Length [mm]: 59
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.93
• Bore Ø [mm]: 25
• Observe technical data:
• Piston Rod Diameter [mm]: 12.4
• Article number of recommended accessories: MK503, PK424
• Packaging length [cm]: 50.5
• Packaging width [cm]: 6.5
• Packaging height [cm]: 6.5
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Fitting Position: Front Axle
• Check OE number:
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 54
• Length 1 [mm]: 344
• Length 2 [mm]: 511
• Piston Rod Diameter [mm]: 25
• Quantity per axle: 1
• Observe technical data:
• Manufacturer: TRW AMORTYZATORY

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• Vehicle type: 0N4
• for PR number: 0N4
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Vehicle Equipment: for vehicles without leveling control
• Length 1 [mm]: 399
• Length 2 [mm]: 625
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 19-230559
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control, for vehicles with bad road version Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• for PR number: 0N1
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Axle: Rigid Axle
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: Gas shock absorber
• Quality class: Q

Suspension: for vehicles without electronic suspension control, for vehicles with bad road version Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• for PR number: 0N1, 0K0, 1JA, 1JC
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Piston Rod Diameter [mm]: 11
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: Gas shock absorber
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-394366, GH-369964, GH-399961, GH-693610
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom Yoke
• Suspension Strut Outer Diameter [mm]: 50
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Suspension Strut Outer Diameter [mm]: 50
• Length [mm]: 550
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KYB
• Name: KY 3348039

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control General Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-394366, GH-369964, GH-399961, GH-693610
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom Yoke
• Suspension Strut Outer Diameter [mm]: 55
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Suspension Strut Outer Diameter [mm]: 55
• Manufacturer: KAYABA
• Name: KY 3358015

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control General Information: Please refer to the technical drawing in "Documents"

• Vehicle type: 0N4
• for PR number: 0N1, G02, G06, G25, G28, G29, G32
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Length 2 [mm]: 548
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: Gas shock absorber
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control, for vehicles with bad road version Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• for PR number: 0N1, 0N4, G07, G11, G16, G21, G24
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Length 2 [mm]: 548
• Suspension Strut Outer Diameter [mm]: 50
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 22-230522
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control, for vehicles with bad road version Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Check OE number:
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SEOV30/13X170A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Axle: Four-Link Axle
• Manufacturer: SACHS
• Name: SHS 318202
• Lisainfo: 318 202
• Additional information: 318 202

Suspension: for vehicles with bad road version, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Article number of recommended accessories: PK422, MK411, PK468
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4.43
• Bore Ø [mm]: 32
• Observe technical data:
• Length 1 [mm]: 382
• Length 2 [mm]: 549
• Piston Rod Diameter [mm]: 22
• Packaging length [cm]: 56.8
• Packaging width [cm]: 17.2
• Packaging height [cm]: 17.2
• Housing Diameter in Clamping Area [mm]: 55
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: ST36/25X167A
• Shock Absorber Mounting Type: Top pin
• Housing Diameter [mm]: 55
• Manufacturer: SACHS

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control for OE number: 3Q0 413 031 AD, 3Q0 413 031 AE, 3Q0 413 031 AF, 3Q0 413 031 AL, 3Q0 413 031 AM, 3Q0 413 031 AN, 3Q0 413 031 AP, 3Q0 413 031 AQ, 3Q0 413 031 AR, 3Q0 413 031 AS, 3Q0 413 031 AT, 3Q0 413 031 BA, 3Q0 413 031 BM, 3Q0 413 031 BN, 3Q0 413 031 BP, 3Q0 413 031 BQ, 3Q0 413 031 BR, 3Q0 413 031 BS, 3Q0 413 031 CB, 3Q0 413 031 CC, 3Q0 413 031 CL, 3Q0 413 031 CM, 5Q0 413 031 CF, 5Q0 413 031 CG, 5Q0 413 031 CH, 5Q0 413 031 CJ, 5Q0 413 031 FN, 5Q0 413 031 GD, 5Q0 413 031 GE, 5Q0 413 031 GG, 5Q0 413 031 GL, 5Q0 413 031 HR, 5Q0 413 031 HS, 5Q0 413 031 HT, 5QA 413 031 AA, 5QA 413 031 AB, 5QF 413 031 AE, 5QF 413 031 AF, 5QF 413 031 AG, 5QF 413 031 AQ, 5QF 413 031 AR, 5QF 413 031 AS, 5QF 413 031 AT, 5QF 413 031 BB, 5QF 413 031 BE, 5QF 413 031 BL, 5QF 413 031 BR, 5QF 413 031 M, 5QF 413 031 N, 5QF 413 031 P SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles without electronic suspension control
• for PR number: 0N1
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Axle: Rigid Axle
• Shock Absorber System: Monotube
• Manufacturer: BILSTEIN
• Name: BI 24-229883

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Suspension: for vehicles without electronic suspension control
• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: mitte vedrukandev amort
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Telg: Multi-link sild
• Sõidukivarustus: sõidukitele ilma nivooreguleerijata
• PR-numbri jaoks: 0N4
• Amort-süsteem: Ükstoru
• Manufacturer: BILSTEIN
• Name: BI 24-229937

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Suspension: for vehicles with electronic suspension control
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Electronically adjustable shock strength
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 5.568
• Operating Mode: Electronic
• Warranty: 5 years warranty
• Packaging length [cm]: 59.1
• Packaging width [cm]: 20.7
• Packaging height [cm]: 21.2
• Manufacturer: MONROE

• Fitting Position: Rear Axle Left, Rear Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Damper without Rebound Spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Fabrication Number: A-VW-004
• Shock Absorber System: Electronically adjustable shock strength
• Braking/Drive Dynamics: for vehicles with DCC suspension
• Manufacturer: NTY

• Suspension: for vehicles without electronic suspension control
• for PR number: 0N1, G01, G07, G16, G21, G24
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Length 2 [mm]: 548
• Suspension Strut Outer Diameter [mm]: 50
• Shock Absorber System: Single Tube Upside Down
• Manufacturer: BILSTEIN
• Lisainfo: 35-229865
• Additional information: 35-229865

• Suspension: for vehicles without electronic suspension control
• for PR number: 0N1, G02, G06, G25, G28, G29, G32
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Length 2 [mm]: 548
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Single Tube Upside Down
• Manufacturer: BILSTEIN

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• for PR number: G01, G07, G16, G21, G24
• Suspension Strut Outer Diameter [mm]: 50
• Shock Absorber System: Single Tube Upside Down
• Manufacturer: BILSTEIN
• Name: BI 35-229902

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Suspension: for vehicles without electronic suspension control
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• for PR number: G02, G06, G25, G28, G29, G32
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Single Tube Upside Down
• Name: BI 35-229919
• Manufacturer: BILSTEIN

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Front Axle Left, Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Fabrication Number: A-VW-003
• Shock Absorber System: Twin-Tube
• Suspension: for vehicles with electronic suspension control
• Braking/Drive Dynamics: for vehicles with DCC suspension
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Suspension: for vehicles with electronic suspension control
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Damper without Rebound Spring
• Shock Absorber System: Electronically adjustable shock strength
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 4.2
• Operating Mode: Electronic
• Warranty: 5 years warranty
• Packaging length [cm]: 69.6
• Packaging width [cm]: 13.3
• Packaging height [cm]: 13.6
• Manufacturer: MONROE

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Suspension: for vehicles with electronic suspension control
• Length 1 [mm]: 372
• Length 2 [mm]: 550
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Twin-Tube
• Name: BI 23-238978
• Manufacturer: BILSTEIN
• Quality class: Q

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Vehicle type: PDD
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Suspension: for vehicles with electronic suspension control
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 23-254343

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Vehicle type: PDD
• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: mitte vedrukandev amort
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Telg: Multi-link sild
• Šassii: Elektr.vedrustusregul. sõidukitele
• Amort-süsteem: kaks toru
• Name: BI 20-267537
• Manufacturer: BILSTEIN

• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: mitte vedrukandev amort
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Telg: Multi-link sild
• Pikkus 1 [mm]: 403
• Pikkus 2 [mm]: 632
• Amort-süsteem: kaks toru
• Manufacturer: BILSTEIN
• Name: BI 20-238988
• Quality class: Q

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Axle: Rigid Axle
• Length 1 [mm]: 416
• Length 2 [mm]: 649
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 20-278731