• Number of pins: 4
• Supplementary Article/Info 2: without cable
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 6
• Supplementary Article/Info 2: without cable, with plastic socket
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Info 2: with plug, without cable
• for OE number: 4D0971993
• Number of pins: 3
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 4D0971993
• Supplementary Article/Info 2: with plug, with cable
• Number of pins: 3
• Name: Kaabliparanduskomplekt, ktuserohu andur
• Manufacturer: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: DDYA
• Thread Size: M12x1,5
• Spanner Size: 17
• Manufacturer: FACET

• Engine Code: DDYA
• Thread Size: M12x1,5
• Spanner Size: 17
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: EPS

• Number of pins: 3
• Fitting Position: Cylinder Head
• Supplementary Article/Info 2: with seal ring, without cable
• Connector Shape: oval
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: DDYA
• Colour: black
• Plug Type: Screw Contact
• Manufacturer: FACET

• Engine Code: DDYA
• Colour: black
• Plug Type: Screw Contact
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• for OE number: 04E 919 501 B
• Length [mm]: 40
• Guarantee: 3 years guarantee
• Number of pins: 2
• Voltage [V]: 12
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Number of connectors: 2
• Manufacturer: ERA

• Engine Code: DDYA
• Thread Size: M12x1,5
• Spanner Size: 16
• Manufacturer: FACET

• Quantity: 1
• Number of pins: 3
• Name: DE SS12308-12B1
• Manufacturer: DELPHI

• Fabrication Number: ECP-VW-009
• Manufacturer: NTY

• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 17
• for OE number: 04L919824C
• Manufacturer: MEAT & DORIA

• Engine Code: DDYA
• Number of connectors: 3
• Weight [kg]: 0.01
• for OE number: 04L 145 049 AF SK
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• General Information: hall sender camshaft
• Manufacturer: VIKA

• Number of pins: 3
• Fabrication Number: ECS-VW-000
• Manufacturer: NTY

• General Information: pressure sensor
• Manufacturer: BORSEHUNG

• Engine Code: DDYA
• Number of connectors: 3
• Weight [kg]: 0.01
• for OE number: 04L 145 049 AF SK
• Name: SW 33 10 8053
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Number of connectors: 3
• Fabrication Number: ECS-AU-005
• Manufacturer: NTY

• Engine Code: DDYA
• Required quantity: 1
• Manufacturer: FACET

• Number of circuits: 3
• Plug Type: Butt Joint
• Cable Length [mm]: 200
• Wire cross-section [mm²]: 0,5
• Manufacturer: METZGER

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Engine Code: DDYA
• Required quantity: 1
• Name: EP 1.953.774
• Manufacturer: EPS

• General Information: hall sender camshaft
• Manufacturer: VIKA

• Engine Code: DDYA
• Outer Diameter [mm]: 12
• Number of connectors: 3
• Weight [kg]: 0.015
• for OE number: 05E 907 601 D
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Cable Length [mm]: 500
• Cable cross-section from [mm²]: 0.5
• Cable cross-section to [mm²]: 0.5
• Supplementary Article/Supplementary Info: with shrink/solder connector
• for OE number: 4D0971993
• Manufacturer: MEAT&DORIA

• Fuel Mixture Formation: Direct Injection
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV409

Manufacturer: BOSCH OSPRZET SILNIK BENZYNOWY

• Number of pins: 3
• Pressure from [kPA]: 50
• Manufacturer: DLP

Name: CZUJNIK CI—N. POWIETRZA AUDI A1, A3, A4, A5, A6, Q2, Q3, Q5, TT 2,0 TDI 08-

• Engine Code: DDYA
• Required quantity: 1
• Pressure from [kPA]: 29
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.48
• Manufacturer: FACET

• Quantity: 1
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV662
• Manufacturer: ESEN SKV

• General Information: pressure difference sender
• Manufacturer: BORSEHUNG

• Engine Code: DDYA
• Required quantity: 1
• Pressure from [kPA]: 29
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.48
• Name: EP 1.993.327
• Manufacturer: EPS

• Required quantity: 1
• Mounting Type: Bolted
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of pins: 3
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Connector Shape: D Shape
• Number of connectors: 1
• for OE number: 04L906051B
• Manufacturer: MEAT&DORIA

• Quantity: 1
• Number of pins: 3
• Pressure from [kPA]: 48
• Name: DE PS20074-12B1
• Manufacturer: DELPHI

• Number of pins: 3
• Pressure [Pa] from: 48,500
• Pressure [Pa] to: 400,000
• Manufacturer: FAE

• Fitting Position: Exhaust Turbocharger
• Connector Shape: D Shape
• Number of pins: 3
• Sensor Type: NTC Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic), PBT
• Components deviate from OE:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Equipment: for vehicles with diesel soot filter
• Connector Shape: oval
• Number of pins: 3
• Housing Colour: black
• Number of mounting bores: 1
• Housing material: GRP (Glass fibre Reinforced Plastic), PBT
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Exhaust System: before soot particulate filter
• Connector Shape: oval
• Number of pins: 3
• Pressure [Pa] from: -14,000
• Pressure [Pa] to: 100,000
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• Manufacturer Restriction: VAG
• Number of pins: 3
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Contact surface: Tin-plated
• Socket Width [mm]: 2.8
• Supplementary Article/Supplementary Info: with socket housing, with gasket/seal
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, andur (ohuvotu rohk)
• Manufacturer: HBE

Manufacturer: NRF

• Fabrication Number: EGT-VW-083
• Number of pins: 2
• Cable Length [mm]: 620
• for OE number: 04L906088BD
• Manufacturer: NTY

• Construction Year from: 04.2018
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 630
• Overall Length [mm]: 745
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: PTC
• Manufacturer: VALEO

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Opening pressure [kPa]: 14
• Manufacturer: DLP

Name: CZUJNIK CI—NIENIA SPALIN VW ARTEON, CADDY, CRAFTER, GOLF 12-

• Fitting Position: Left, Fuel Rail
• Thread Size: M 18
• Thread Pitch [mm]: 1.5
• Thread Length [mm]: 12.5
• Spanner Size: 27
• Operating Pressure [bar]: 2,000
• Number of pins: 3
• Mounting Type: Bolted
• Housing Colour: black
• Connector Shape: D Shape
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 04.2018
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 720
• Overall Length [mm]: 835
• Number of pins: 2
• Connector Shape: oval
• Socket colour: brown
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: PTC
• Manufacturer: VALEO
• Name: VA 368901

• Number of pins: 2
• Fabrication Number: EGT-VW-084
• Cable Length [mm]: 530
• Manufacturer: NTY

• Manufacturer Restriction: VAG
• Plug Type ID: Code A
• Cable Length [mm]: 175
• Number of pins: 3
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, heitgaasi rohuandur
• Manufacturer: HBE

• Construction Year to: 02.2018
• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 1,060
• Name: SONDA LAMBDA A3, Q2, Q3 11-
• Manufacturer: DLP

• Engine Code: DDYA
• Number of connectors: 3
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.026
• Name: Andur, heitgaasisurve
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: before exhaust turbocharger
• Cable Length [mm]: 600
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.09
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV444

• Thread Size: M18 x 1,5
• Spanner Size: 27
• Number of pins: 3
• Name: Andur,ktuserohk
• Manufacturer: MEY

• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 24
• Number of pins: 3
• Version: IAM
• Manufacturer: METZGER

• Engine Code: DGTE
• Fitting Position: before soot particulate filter
• for OE number: 04L 906 088 DH
• Cable Length [mm]: 720
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Connector Shape: D Shape
• Guarantee: 3 years guarantee
• Exhaust System: before soot particulate filter
• Socket colour: brown
• Weight [kg]: 0.09
• Shape: L Shape
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV384

• for OE number: 04L 907 601
• Width [mm]: 67
• Height [mm]: 68
• Length [mm]: 40
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• General Information: pressure sensor
• Manufacturer: VIKA

• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: Andur, heitgaasisurve
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: DGTE
• for OE number: 04L 906 088 BF
• Overall Length [mm]: 760
• Cable Length [mm]: 620
• Number of pins: 2
• Connector Shape: D Shape
• Guarantee: 3 years guarantee
• Exhaust System: after soot particulate filter
• Socket colour: beige
• Weight [kg]: 0.09
• Shape: straight
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Exhaust System: before soot particulate filter
• Mounting Type: Bolted
• Number of pins: 3
• Diameter 1 [mm]: 8
• Diameter 2 [mm]: 8
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PP009403221

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Fitting Position: before exhaust turbocharger
• Cable Length [mm]: 530
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• Vehicle Identification Number (VIN) from: BV5***
• Engine Code: DDYA, DGTE
• Block Separation:
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range from [kPa]: -14
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: without accessories
• Fitting Position: Soot Particulate Filter
• Manufacturer: PIERBURG

• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Name: Andur,Nukkvollipositsioon
• Manufacturer: VAL

• Engine Code: DGTE
• Fitting Position: after soot particulate filter
• Thread Size: M14x1,5
• Cable Length [mm]: 696
• Socket colour: beige
• Manufacturer: FAE

• Exhaust System: before turbocharger
• Manufacturer: ASHIKA

• Name: Andur, heitgaasisurve
• Manufacturer: BOS

• Required quantity: 1
• Fitting Position: before catalytic converter
• Supplementary Article/Supplementary Info: with synthetic grease
• Name: Andur, heitgaasitemperatuur
• Manufacturer: NRF

• Engine Code: DDYA
• Number of connectors: 3
• External Thread [mm]: M18 X 1,5 MM
• Spanner Size: 27
• Tightening Torque [Nm]: 100
• Manufacturer: PIERBURG

• Engine Code: DGTE
• Fitting Position: before soot particulate filter
• External Thread Size: M14 x 1,5
• Number of connectors: 2
• Cable Length [mm]: 719
• Weight [kg]: 0.066
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: before soot particulate filter
• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 850
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT358226331
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• General Information: Exhaust Gas Temperature Sensor
• Manufacturer: VIKA

• Engine Code: DDYA
• External Thread Size: M18 x 1,5
• Number of connectors: 3
• Weight [kg]: 0.06
• for OE number: 04L 906 054
• Name: ANDUR,KšTUSEROHK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 640
• Number of pins: 2
• Name: DE TS30317-12B1
• Manufacturer: DELPHI

• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.23
• Always compare old and new part (in particular OE No.):
• Name: CE 07SKV230
• Manufacturer: ESEN SKV

• for OE number: 04L 906 262 A, 04L 906 262 C
• Cable Length [mm]: 540
• Number of pins: 6
• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-019
• Manufacturer: NTY

• Fitting Position: before exhaust turbocharger
• Component Number: G 235
• Number of pins: 2
• Mounting Type: Bolted
• Socket colour: black
• Sensor Type: NTC Sensor
• Cable Length [mm]: 530
• Overall Length [mm]: 553
• Thread Size: M 14
• Thread Pitch [mm]: 1.5
• Connector Shape: D Shape
• Spanner Size: 17
• Supplementary Article/Info 2: with heat shield pipe, with cable
• Bolt Head-/Nut Design: Hexagon
• Shape: Bent
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: DDYA
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• General Information: Exhaust Gas Temperature Sensor
• Manufacturer: VIKA

• Required quantity: 1
• Fitting Position: before soot particulate filter
• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 50
• Cable Length [mm]: 850
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Length [mm]: 1,216
• Number of circuits: 5
• Fitting Position: after catalytic converter
• Fabrication Number: ESL-AU-017
• Manufacturer: NTY

• Oxygen Sensor: Regulating Probe, Broadband oxygen sensor, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 540
• Manufacturer: DELPHI ELEKTRONIKA

• General Information: rain and humidity sensor
• Manufacturer: BORSEHUNG

• Engine Code: DDYA
• Number of pins: 3
• Connector Shape: D Shape
• Thread Size: M18 x 1,5
• Fuel Mixture Formation: Direct Injection
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.