• Length [mm]: 32
• Internal Toothing differential side, conn. to transmission: 33
• Diameter 1 [mm]: 100
• Manufacturer: BGA

Fitting Position: transmission sided, Front Axle Left, Front Axle Right

• Fabrication Number: NPW-VW-005
• Manufacturer: NTY

Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 6-Speed Manual Transmission, 5-Speed Manual Transmission, Manual Transmission, 4-Speed Automatic Transmission, Automatic Transmission, 7-Speed Dual-Clutch Transmission, Dual-Clutch Transmission

• Fitting Position: Wheel Side
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59
• Diameter 1 [mm]: 28
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
• Additional information: 7274 KAMOKA
• Lisainfo: 7274 KAMOKA

• Fitting Position: Front Axle, transmission sided
• Length [mm]: 34
• Internal Toothing differential side, conn. to conn. shaft: 33
• Outer Diameter [mm]: 99.9
• Joint Type: Flexible Joint Disc
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• Fabrication Number: NPW-VW-002
• Manufacturer: NTY
• Name: NTY NPW-VW-002

Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 6-Speed Manual Transmission, 5-Speed Manual Transmission, Manual Transmission, Automatic Transmission, 6-Speed Automatic Transmission, 7-Speed Dual-Clutch Transmission, Dual-Clutch Transmission

• Fitting Position: Front Axle Left, Wheel Side, Front Axle Right
• Length [mm]: 99.5
• Thread Size: M16X1,5
• External Toothing wheel side: 36
• Sealing Ring Diameter [mm]: 59.5
• Technical Information Number: Groove Type Inner
• Manufacturer: GSP

Transmission Type: 6-Speed Manual Transmission, 7-Speed Dual-Clutch Transmission

• Fitting Position: Rear Axle, Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 33
• Sealing Ring Diameter [mm]: 59
• Outer Diameter [mm]: 82
• Joint Type: CV Joint
• Fabrication Number: NPZ-VW-043
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: NPZ-VW-039
• Internal Toothing wheel side: 33
• External Toothing wheel side: 36
• Manufacturer: NTY

Transmission Type: 7-Speed Dual-Clutch Transmission, 6-Speed Manual Transmission, 5-Speed Manual Transmission, Manual Transmission, Dual-Clutch Transmission

• Transmission Type: 6-Speed Manual Transmission
• Length [mm]: 34
• Bore Diameter [mm]: 8.2
• Internal Toothing differential side, conn. to conn. shaft: 33
• Number of bores: 6
• Bolt Hole Circle Ø [mm]: 86
• Joint Diameter [mm]: 100
• Manufacturer: JPN

Fitting Position: transmission sided, Front Axle Left, Front Axle Right

• Fitting Position: Front Axle Left, Wheel Side, Front Axle Right
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Length [mm]: 105
• Thread Size: M16X1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Joint Type: 6-ball joint
• Technical Information Number: Original design
• Manufacturer: GSP

• Fitting Position: Front Axle, Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59
• Outer Diameter [mm]: 100
• Joint Type: CV Joint
• Fabrication Number: NPZ-VW-019
• Manufacturer: NTY

• Fitting Position: Front Axle Left, transmission sided
• Length [mm]: 32
• Internal Toothing differential side, conn. to transmission: 28
• for OE number: 1K0407331
• Technical Information Number: Non-Original design
• Manufacturer: GSP

Transmission Type: 7-Speed Automatic Transmission, 6-Speed Manual Transmission

• Fitting Position: Front Axle
• Transmission Type: Manual Transmission
• Number of Teeth: 33
• Diameter [mm]: 100
• Internal Toothing wheel side: 33
• Manufacturer: VIKA

General Information: c.v.joint; inner; 33teeth; MT; 100MM; Inner tooth33mm

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Transmission Type: 6-Speed Manual Transmission
• Length [mm]: 97
• Thread Size: M16x1.5F
• External Toothing wheel side: 36
• Internal Toothing wheel side: 33
• Sealing Ring Diameter [mm]: 59.5
• Joint Diameter [mm]: 94
• Manufacturer: JPN

• Fitting Position: transmission sided
• Inner Diameter [mm]: 33
• General Information: c.v.joint; inner; Inner tooth33mm
• Manufacturer: VIKA

• Fitting Position: Wheel Side, Front Axle Right
• Sealing Ring Diameter [mm]: 59.5
• Internal Toothing wheel side: 27
• External Toothing wheel side: 36
• Outer Diameter [mm]: 100.1
• Manufacturer: LPR

• Fabrication Number: NPW-VW-013
• Manufacturer: NTY

Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 7-Speed Dual-Clutch Transmission, 6-Speed Manual Transmission, Manual Transmission, Dual-Clutch Transmission, Automatic Transmission, 5-Speed Manual Transmission, 6-Speed Dual-Clutch Transmission

• Fitting Position: Front Axle, transmission sided
• Transmission Type: 6-Speed Manual Transmission
• Joint Type: CV Joint
• Drive Shaft: without ABS ring
• Length [mm]: 34
• Internal Toothing differential side, conn. to conn. shaft: 33
• Outer Diameter [mm]: 100
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEY

• Fitting Position: Front Axle Left, transmission sided
• Length [mm]: 32
• Internal Toothing differential side, conn. to transmission: 28
• Manufacturer: JPN

• Inner Diameter 2 [mm]: 100
• External Toothing differential side: 33
• Length 2 [mm]: 34
• Manufacturer: SNR /NTN-SNR/
• Name: SN IJK54.003

Fitting Position: Front Axle Left, transmission sided, Front Axle Right

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Transmission Type: 6-Speed Manual Transmission
• External Toothing wheel side: 36
• Internal Toothing wheel side: 33
• Sealing Ring Diameter [mm]: 59.5
• Outer Diameter [mm]: 93.7
• Machined: without groove in internal component
• Manufacturer: TRISCAN
• Lisainfo: VAG
• Additional information: VAG

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Joint Type: CV Joint
• Length [mm]: 105
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Bellows Material: TPE (thermoplastic elastomer)
• Manufacturer: FAST

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Fitting Position: transmission sided, Front Axle Right
• Length [mm]: 104
• External Toothing differential side: 40
• Internal Toothing differential side, conn. to transmission: 28
• Sealing Ring Diameter [mm]: 46.9
• for OE number: 5N0498103D
• Manufacturer: GSP

• Fitting Position: Front Axle Left, Wheel Side, Front Axle Right
• Length [mm]: 100
• Thread Size: M16X1,5
• External Toothing wheel side: 36
• Sealing Ring Diameter [mm]: 59.5
• Manufacturer: DRIVE

Transmission Type: 6-Speed Manual Transmission, 7-Speed Dual-Clutch Transmission

• Engine Code: DADA
• Fitting Position: transmission sided, Front Axle
• Length [mm]: 34
• Outer Diameter [mm]: 100
• Internal Toothing wheel side: 33
• Weight [kg]: 1.7
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• Fitting Position: Wheel Side, Front Axle
• Outer Diameter [mm]: 93.7
• External Toothing wheel side: 36
• Internal Toothing wheel side: 33
• Manufacturer: LPR

• Fitting Position: Front Axle
• Length [mm]: 101
• External Toothing wheel side: 36
• Internal Toothing wheel side: 33
• General Information: c.v.joint; outer; Inner tooth33mm
• Manufacturer: VIKA

• Fitting Position: Front Axle Left, transmission sided
• Length [mm]: 32
• Manufacturer: DRIVE

Transmission Type: 7-Speed Automatic Transmission, 6-Speed Manual Transmission

• Vehicle Identification Number (VIN): [1M-3-109 001;], [1M-3-109001;], [8L-X-098488;]
• External Toothing differential side: 28
• Inner Diameter 2 [mm]: 108
• Length 2 [mm]: 32
• Manufacturer: SNR /NTN-SNR/
• Name: SN IJK54.006

Fitting Position: Front Axle Left, transmission sided, Front Axle Right

• Engine Code: DPCA, DADA
• Transmission Type: 6-Speed Manual Transmission
• Fitting Position: Front Axle, transmission sided
• Length [mm]: 34
• Internal Toothing differential side, conn. to conn. shaft: 33
• Outer Diameter [mm]: 99.9
• Number of Holes: 6
• Joint Type: Flexible Joint Disc
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: SKF

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Fitting Position: transmission sided
• Sealing Ring Diameter [mm]: 46.9
• Joint Type: Tripod Joint
• Length [mm]: 104
• External Toothing differential side: 40
• Internal Toothing differential side, conn. to transmission: 28
• Surface: Powder coated
• Name: Liigendlaager, veovoll
• Manufacturer: MEY

• Fitting Position: Front Axle Right, Wheel Side, Right
• Transmission Type: Dual-Clutch Transmission
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.4
• Outer Diameter [mm]: 99.9
• Bellows Material: Rubber
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEP

• Transmission Type: Automatic Transmission
• for PR number: G1C
• Fitting Position: Wheel Side, Front Axle
• Weight [kg]: 2.553
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59
• Outer Diameter [mm]: 97
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Block Separation:
• Length [mm]: 100
• Outer Diameter [mm]: 94
• Internal Thread Size: M16 x 1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 33
• Weight [kg]: 2.22
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Automatic Transmission
• Fitting Position: Front Axle, Wheel Side
• Weight [kg]: 2.275
• External Toothing wheel side: 36
• Internal Toothing wheel side: 33
• Sealing Ring Diameter [mm]: 59
• Outer Diameter [mm]: 93
• Joint Type: CV Joint
• Packaging length [cm]: 18
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Sealing Ring Diameter [mm]: 59.5
• Thread Size: M16x1,5
• External Toothing wheel side: 36
• Length 2 [mm]: 105
• Internal Toothing wheel side: 27
• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Name: SN OJK54.035
• Manufacturer: SNR

• Engine Code: DADA, DPCA
• Transmission Type: 6-Speed Manual Transmission
• Fitting Position: Wheel Side, Front Axle
• Thread Size: M16X1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 33
• Sealing Ring Diameter [mm]: 59.5
• Outer Diameter [mm]: 93.5
• Joint Type: CV Joint
• Machined: with groove in inner part (inside)
• Name: Liigendlaager, veovoll
• Manufacturer: SKF

• Thread Size: M16x1,5
• Sealing Ring Diameter [mm]: 59.5
• External Toothing wheel side: 36
• Length 2 [mm]: 99.5
• Internal Toothing wheel side: 33
• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Name: SN OJK54.038
• Manufacturer: SNR

• Fitting Position: Wheel Side, Front Axle
• Transmission Type: Manual Transmission
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 33
• Sealing Ring Diameter [mm]: 59.5
• Outer Diameter [mm]: 93.7
• Bellows Material: Thermoplast
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEP

• Transmission Type: 6-Speed Manual Transmission
• Joint Type: Flexible Joint Disc
• Internal Toothing differential side, conn. to conn. shaft: 33
• Machined: without groove in internal component
• Joint Diameter [mm]: 100
• Length [mm]: 34
• Supplementary Article/Info 2: with cap
• Bore Diameter [mm]: 8
• Number of bores: 6
• Bolt Hole Circle Ø [mm]: 86
• Bellows Material: NBR (nitrile butadiene rubber)
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Name: Liigendlaager, veovoll
• Manufacturer: GKN

Fitting Position: transmission sided, Front Axle Left, Front Axle Right

• Fitting Position: Wheel Side, Front Axle Right
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 60
• Machined: with groove in internal component
• Joint Diameter [mm]: 100
• Length [mm]: 105
• Thread Size: M16X1.5
• Bellows Material: TPE (thermoplastic elastomer)
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Name: Liigendlaager, veovoll
• Manufacturer: GKN

Technical Information: Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required!

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Transmission Type: 6-Speed Manual Transmission
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 33
• Sealing Ring Diameter [mm]: 60
• Machined: without groove in internal component
• Joint Diameter [mm]: 94
• Length [mm]: 97
• Thread Size: M16x1.5
• Bellows Material: TPE (thermoplastic elastomer)
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Name: Liigendlaager, veovoll
• Manufacturer: GKN

• Fitting Position: transmission sided, Front Axle Left
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Joint Type: Flexible Joint Disc
• Internal Toothing differential side, conn. to conn. shaft: 28
• Machined: without groove in internal component
• Joint Diameter [mm]: 108
• Length [mm]: 32
• Supplementary Article/Info 2: with cap
• Bore Diameter [mm]: 10.2
• Number of bores: 6
• Bolt Hole Circle Ø [mm]: 94
• Bellows Material: TPE (thermoplastic elastomer)
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Name: Liigendlaager, veovoll
• Manufacturer: GKN

• Fitting Position: Wheel Side, Front Axle Left
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 60
• Machined: with groove in internal component
• Dust Cover: without dust cover
• Joint Diameter [mm]: 98
• Length [mm]: 105
• Thread Size: M16x1.5
• Bellows Material: TPE (thermoplastic elastomer)
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Name: Liigendlaager, veovoll
• Manufacturer: GKN

Technical Information: Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required!