• Vehicle Equipment: for vehicles without headlamp cleaning system
• Number of pins: 2
• Connector Shape: D Shape
• Consult accessories list for recommended additional repairs:
• Name: NIVOOLšLITI, PESUVEEKOGUS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Equipment: for vehicles without headlamp cleaning system
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Fabrication Number: ECT-VW-002
• Manufacturer: NTY
• Name: NTY ECT-VW-002

• Fabrication Number: ECT-AU-003
• Manufacturer: NTY

• Quantity: 1
• Number of mounting bores: 1
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Fitted Diameter [mm]: 9
• Colour Coding: green
• Housing Colour: black
• Connector Shape: D Shape, oval
• General Information: temperature sensor
• Manufacturer: VIKA

• Weight [g]: 15
• Name: IM 5309
• Manufacturer: ORIGINAL IMPERIUM

• Engine Code: CRLB, DFGA, DSRB, DSRA, DBGA
• Number of connectors: 2
• Colour: black
• Fitting Position: Front
• Weight [kg]: 0.004
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Behind the radiator, Fuel pump to filter
• Thread Size: M12x1,5 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Socket colour: black
• Weight [kg]: 0.01
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV673
• Manufacturer: ESEN SKV

• for OE number: 04E919501B
• Fabrication Number: ECT-VW-001
• Manufacturer: NTY
• Name: NTY ECT-VW-001

• General Information: temperature sensor
• Manufacturer: VIKA

• General Information: temperature sensor
• Manufacturer: VIKA

• Fabrication Number: ECT-VW-007
• Manufacturer: NTY
• Name: NTY ECT-VW-007

• General Information: external temperature sensor
• Manufacturer: BORSEHUNG

• for PR number: KH0, KH6, KH7
• Number of pins: 2
• Sensor Type: NTC Sensor
• Connector Shape: rectangular, angled
• Housing material: GRP (Glass fibre Reinforced Plastic)
• for OE number: 5Q0 907 543A
• Mounting Type: Clipped
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• General Information: temperature sensor
• Manufacturer: BORSEHUNG

• Number of pins: 2
• Sensor Type: NTC Sensor
• Connector Shape: D Shape
• Supplementary Article/Info 2: with seal ring, without cable
• Socket colour: black
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity: 1
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Connector Shape: D Shape
• General Information: coolant temperature sensor
• Manufacturer: BORSEHUNG

• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• for OE number: 03F 919 501 B
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: TRU

• Engine Code: CRLB
• Colour: black
• Plug Type: Screw Contact
• Manufacturer: FACET

• Engine Code: CRLB
• Colour: black
• Plug Type: Screw Contact
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: CRLB, DFGA, DBGA
• Construction Year to: 07.2018, 11.2017
• Block Separation:
• Supplementary Article/Info 2: with screw
• for OE number: 04L 906 433 B
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• for OE number: 04E 919 501 B
• Length [mm]: 40
• Guarantee: 3 years guarantee
• Number of pins: 2
• Voltage [V]: 12
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Mounting Type: Screw Connection
• Connector Shape: D Shape
• Number of pins: 2
• Socket colour: black
• for OE number: 04E919501B
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• General Information: impulse sender; crackshaft
• Manufacturer: VIKA

• Number of pins: 3
• Colour: grey
• Sensor Type: Hall Sensor
• Fabrication Number: ECP-AU-036
• Manufacturer: NTY

• Number of pins: 2
• Connector Shape: D Shape
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for PR number: KH0, KH6, KH7
• Number of pins: 2
• Vehicle Equipment: for vehicles with air conditioning
• Manufacturer Restriction: Am Verdampfer
• Power [W]: 0.06
• Manufacturer: METZGER

Manufacturer: NRF

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11480

• Number of pins: 3
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Connector Shape: D Shape
• Supplementary Article/Info 2: with screw, without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: DBGA, DFGA
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.013
• for OE number: 04E 919 501 B
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: MAGNETI MARELLI

• Engine Code: CRLB, DFGA, DBGA
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Number of pins: 2
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MEY

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Engine Code: CRLB
• Transmission Type: Manual Transmission
• Manufacturer: FACET

• Fabrication Number: ECC-AU-011
• Manufacturer: NTY
• Name: NTY ECC-AU-011

• Assy./disassy. by qualified personnel required!:
• Fitting Position: in transmission housing
• Number of pins: 3
• Voltage [V]: 12
• Mounting Type: Plugged
• for type code: G195
• Name: HE 6PU358380041
• Manufacturer: HELLA

Transmission Type: 6-Speed Automatic Transmission, not for 7-speed automatic transmission

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Connector Shape: oval
• Alternative Repair Kit: 551676
• Manufacturer: ERA

• Engine Code: CRLB
• Transmission Type: Manual Transmission
• Name: ANDUR,P™™RDED
• Manufacturer: EPS

• Engine Code: CRLB, DFGA, DBGA
• Construction Year to: 07.2019
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE ELEKTRYKA

• Number of pins: 3
• Sensor Type: Inductive Sensor
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Fabrication Number: ECP-AU-018
• Manufacturer: NTY

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable, with screw
• for OE number: 04L906433B
• Manufacturer: MEAT&DORIA

• for PR number: KH0, KH7
• Number of pins: 2
• Vehicle Equipment: for vehicles with automatic climate control
• Manufacturer: METZGER

• Construction Year to: 07.2019
• Engine Code: CRLB, DFGA, DBGA
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: VDO

• Engine Code: CRLB
• Colour: grey
• Housing Colour: black
• Manufacturer: FACET

• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU013122871
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fabrication Number: EPO-AU-006
• Manufacturer: NTY
• Name: NTY EPO-AU-006

Lisainfo: AUDI A3 1.6TDI 2015-,Q3 2.0TDI 2014-,SEAT ALHAMBRA 2.0TDI 2015-,LEON 1.6TDI,2.0TDI 2012-,SKODA OCTAVIA III 1.6TDI,2.0TDI 2015-,VW GOLF VII 1.6TDI,2.0TDI 2015-,PASSAT B8 1.6TDI,2.0TDI 2014-,TIGUAN 2.0TDI 2007- Additional information: AUDI A3 1.6TDI 2015-,Q3 2.0TDI 2014-,SEAT ALHAMBRA 2.0TDI 2015-,LEON 1.6TDI,2.0TDI 2012-,SKODA OCTAVIA III 1.6TDI,2.0TDI 2015-,VW GOLF VII 1.6TDI,2.0TDI 2015-,PASSAT B8 1.6TDI,2.0TDI 2014-,TIGUAN 2.0TDI 2007-

• Number of pins: 3
• Connector Shape: oval
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Thread Length [mm]: 11
• Base body material: Brass
• Measuring Range from [bar]: 0.48
• Measuring Range to [bar]: 11
• Sensor Type: Hall Sensor
• Colour Coding: brown
• Supplementary Article/Info 2: with seal ring
• Seal Material: Aluminium
• Spanner Size: 24
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Oil Sump
• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: with seal ring
• Number of mounting bores: 3
• Housing Type: Synthetic Material Housing
• Housing material: Polyamid 6.6
• Housing Colour: black
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Name: Andur,Mootoriolitase
• Manufacturer: MAX

• Number of pins: 3
• Connector Shape: D Shape
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Voltage [V]: 12
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: DSRA, DSRB, DTSA, DTSB
• Number of pins: 3
• Pressure from [bar]: 0.48
• Pressure to [bar]: 11
• Fitting Position: Engine Block
• Manufacturer: METZGER

• Colour: black
• Number of pins: 3
• Manufacturer: ERA

• General Information: oil level sensor
• Manufacturer: VIKA

Manufacturer: JPN

Manufacturer: VALEO

• Voltage [V]: 12
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV393
• Manufacturer: ESEN SKV

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,MOOTORIOLITASE
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• for OE number: 06E907660C
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: CRLB
• Housing Colour: black
• Sensor Length [mm]: 66.9
• Manufacturer: FACET

• Engine Code: CRLB, DFGA, DBGA
• Construction Year to: 07.2019
• Manufacturer: BOSCH

• Fitting Position: Oil Sump
• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: with seal ring
• Seal Material: HNBR (hydrogenated nitrile butadiene rubber)
• Number of mounting bores: 3
• Housing Type: Synthetic Material Housing
• Housing material: PA 66 GF 30, GRP (Glass fibre Reinforced Plastic)
• Housing Colour: black
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CRLB
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CRLB
• Housing Colour: black
• Sensor Length [mm]: 66.9
• Manufacturer: EPS

• Number of pins: 3
• Connector Shape: D Shape
• Number of mounting bores: 3
• Quality: OE EQUIVALENT
• for OE number: 03C907660G
• Manufacturer: MEAT & DORIA