• Fitting Position: Front Axle Left, Front Axle Right, Front
• Mounting Type: Rubber-Metal Mount
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)"

• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Fitting Position: Front, Front Axle, both sides
• Weight [kg]: 0.153
• Control/Trailing Arm Type: for control arm
• Required quantity: 2
• Name: Puks - K„„ndmik VW P. POLO/A2/FABIA 02-
• Manufacturer: TED

• Fabrication Number: ZTP-VW-001A
• Manufacturer: NTY

Fitting Position: Front Axle, inner, in front of axle, Left, Right, Lower

• for PR number: 2H0, 2H5
• Fitting Position: Rear Axle Right, Rear Axle Left
• Height [mm]: 64
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• Control/Trailing Arm Type: for trailing arm
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: MAX

• Fitting Position: Lower Front Axle, Lower
• for OE number: 1K0 407 182
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle, Front
• Total Length [mm]: 54
• Outer Diameter [mm]: 48
• Inner Diameter [mm]: 12
• Manufacturer: CORTECO ZAWIESZENIE

• Control/Trailing Arm Type: for control arm
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle, Centre
• for OE number: 1K0 505 541 B
• Manufacturer: GSP

• Outer Diameter [mm]: 60
• for PR number: 2H0, 2H5
• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Manufacturer: DELLO AUTOMEGA

• Thickness [mm]: 45
• Material: Rubber/Metal
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38, 24
• Mounting Type: Rubber-Metal Mount
• Fabrication Number: ZTT-VW-006A
• Manufacturer: NTY

Fitting Position: Rear Axle, Upper, inner, Rear Axle Left, Rear Axle Right

• Fitting Position: Lower, Front, Front Axle Left, Front Axle Right
• Thickness [mm]: 54
• Outer Diameter 1 [mm]: 28
• Outer Diameter 2 [mm]: 40
• Inner Diameter 1 [mm]: 12
• Manufacturer: BGA

• Fitting Position: Rear Axle Upper
• Fabrication Number: ZTT-VW-001A
• Manufacturer: NTY

• Fitting Position: Front Axle, inner, in front of axle, Lower
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 40
• Thickness 1 [mm]: 53
• Manufacturer: DELPHI
• Name: DE TD521W

• Fitting Position: Left, Right, Front Axle
• Required quantity: 2
• Material: Rubber/Metal
• Control/Trailing Arm Type: for control arm
• Weight [g]: 242
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39
• Overall Length [mm]: 54
• Name: IM 1620
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle, Front, Lower
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• for OE number: 5Q0407182A
• Manufacturer: SASIC
• Additional information: 9001759
• Lisainfo: 9001759

• Fitting Position: Rear Axle, outer, Lower
• alternative OE number: AT WHEEL CARRIER
• Inner Diameter 1 [mm]: 49
• Outer Diameter 1 [mm]: 12
• Thickness 1 [mm]: 38
• Manufacturer: DELPHI
• Name: DE TD1058W

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Height [mm]: 54
• Name: ALT 81191AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, Centre
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Height [mm]: 54
• Outer Diameter [mm]: 40
• Inner Diameter [mm]: 12
• Weight [kg]: 0.18
• Name: DY 37-06068-6
• Manufacturer: DYS

• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Front, Front Axle Right
• Weight [kg]: 0.183
• Observe service information:
• Name: Puks - K„„ndmik VW P. GOLF5/JETT3/
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right, Centre
• Material: Rubber/Metal
• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Manufacturer: MERTZ

• Fitting Position: Front Axle Left, Front Axle Right, Lower, Rear
• Mounting Type: Rubber-Metal Mount
• Material: Rubber/Metal
• Thickness [mm]: 50
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65
• Manufacturer: MERTZ

• Fitting Position: Rear Axle Left, Rear Axle Right, Upper, outer
• Material: Rubber/Metal
• Thickness [mm]: 45
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 38.3, 24
• Manufacturer: MERTZ

• Fitting Position: Front, Lower, Front Axle Left, Front Axle Right
• Height [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik VW P. GOLF5/JETT3/PASSAT/TOURAN
• Manufacturer: MEY

• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Front, Front Axle Right
• Weight [kg]: 0.187
• Observe service information:
• Name: SW 30 92 4390
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 5Q0407182
• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Name: DA DSS1079
• Manufacturer: DAYCO

• Braking/Driving Dynamics: for vehicles without Adaptive Drive
• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Centre, Rear Axle Right
• Weight [kg]: 0.18
• Name: Puks
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: 2H5, 2H0
• Fitting Position: Rear Axle, both sides
• Control/Trailing Arm Type: for trailing arm
• Quantity per axle: 2
• Article number of recommended accessories: 38906 01, 43359 01, 44089 01
• Observe service information:
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: LMI

• Thickness [mm]: 45
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 38.3, 24
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Upper, outer, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.125
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: 2H0, 2H5
• Fitting Position: Rear Axle Left, Rear Axle Right
• Height [mm]: 64
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• Control/Trailing Arm Type: for trailing arm
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik VW T. A3/GOLF5/TOU
• Manufacturer: MEY
• Lisainfo: 1005050014
• Additional information: 1005050014

• Fitting Position: Front Axle Left, Front Axle Right, Front, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 39
• Inner Diameter [mm]: 12
• Width [mm]: 32
• Quantity per axle: 2
• for OE number: 5Q0 407 182
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thickness [mm]: 45
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38, 24
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Upper, inner, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.071
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: outer, Rear Axle
• Required quantity: 2
• Weight [g]: 130
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Length [mm]: 50
• Name: IM 1724
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle Lower, inner, Lower
• Manufacturer: GSP ZAWIESZENIE

• Production date from: 01/15
• Fitting Position: Front Axle, Rear, Lower
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65
• for OE number: 5Q0407183K
• Manufacturer: SASIC

• Fitting Position: Rear Axle, Upper
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• for OE number: 5Q0505541A
• Manufacturer: SASIC

• Material: Rubber/Metal
• Fitting Position: Front Axle, Lower, Rear
• Mounting Type: Rubber-Metal Mount
• Observe service information:
• Outer Diameter [mm]: 65, 30
• Thickness [mm]: 50
• Inner Diameter [mm]: 13
• Name: Puks
• Manufacturer: MAX

• Fitting Position: Rear Axle, Upper, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Height [mm]: 45
• Name: ALT 88666AL
• Manufacturer: ALTE AUTOMOTIVE

• Thickness [mm]: 45
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 38.3, 24
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Upper, outer, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.06
• Name: SW 30 92 9682
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower
• General Information: bonded rubber bush
• Manufacturer: BORSEHUNG

• Thickness [mm]: 45
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38, 24
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Upper, inner, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.06
• Name: SW 30 92 9689
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front
• General Information: wishbone arm; front
• Manufacturer: VIKA

• Fitting Position: Front Axle, both sides, Front
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Name: Puks - K„„ndmik VW P. GOLF7/A3 12-
• Manufacturer: LMI

• Fitting Position: Lower Front Axle, Lower
• for OE number: 5Q0 407 183 G
• Manufacturer: GSP ZAWIESZENIE

• Weight [kg]: 0.074
• Fitting Position: Rear Axle both sides, Upper, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 38.1
• Length [mm]: 45
• Manufacturer: RTS

• Weight [kg]: 0.13
• Fitting Position: Rear Axle both sides, Upper, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 38
• Length [mm]: 45
• Manufacturer: RTS

• Fitting Position: Rear Axle, Lower, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• Height [mm]: 64
• Name: ALT 91581AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle, outer, Lower
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 37.4
• Width 1 [mm]: 50
• Width 2 [mm]: 28
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 829064010

• Braking/Driving Dynamics: for vehicles without Adaptive Drive
• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Centre, Rear Axle Right
• Weight [kg]: 0.26
• Supplementary Article/Info 2: with fastening material
• Name: Puks
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: 2H0, 2H5
• Name: Puks
• Manufacturer: LMI

Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Front, outer

• Length [mm]: 49
• Width [mm]: 37
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37
• Fitting Position: Rear Axle Left, outer, Lower, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.13
• Name: Puks - K„„ndmik VW T. SUPERB/PASSAT/TOURAN 14-
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Upper, Rear Axle Left, Rear Axle Right
• Material: Rubber/Metal
• Thickness [mm]: 45
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 24, 38
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
A.A3/VW GOLF/OCTAVIA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A.A3/VW GOLF/OCTAVIA
(kvaliteediklass: PJ)"

• Fitting Position: Upper, Rear Axle Left, Rear Axle Right
• Material: Rubber/Metal
• Thickness [mm]: 45
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 24, 38
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
A.A3/VW GOLF/OCTAVIA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A.A3/VW GOLF/OCTAVIA
(kvaliteediklass: PJ)"

• for PR number: 2H0, 2H5
• Fitting Position: Rear Axle Left, Rear Axle Right
• Height [mm]: 64
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Replace in pairs only:
• Name: Puks - K„„ndmik VW T. PASSAT/SHARAN 05- LE/PR
• Manufacturer: MEY
• Lisainfo: 1147110000/HD
• Additional information: 1147110000/HD

General Information: No risk of leakage: MEYLE-HD full-rubber bushing with optimized rubber shape for a significantly longer lifetime.

• Fitting Position: Rear Axle both sides, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 37.4
• Inner Diameter [mm]: 12.1
• Length [mm]: 49.8
• Weight [kg]: 0.132
• Manufacturer: RTS

• Fitting Position: Front Axle
• General Information: bonded rubber bush
• Manufacturer: BORSEHUNG

• Braking/Driving Dynamics: for vehicles without Adaptive Drive
• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Centre, Rear Axle Right
• Weight [kg]: 0.26
• Supplementary Article/Info 2: with fastening material
• Name: SW 33 10 2842
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 60
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 44.5
• Material: Rubber/Metal
• Weight [kg]: 0.115
• Name: Puks
• Manufacturer: FEB

Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Rear, inner General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.18
• Fitting Position: Rear Axle both sides, Lower, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Diameter 1 [mm]: 12.1
• Diameter 2 [mm]: 60.3
• Length [mm]: 63.8
• Manufacturer: RTS

• Weight [kg]: 0.342
• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left=right

• Fitting Position: Rear Axle both sides, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 40
• Inner Diameter [mm]: 12.2
• Length [mm]: 60
• Weight [kg]: 0.087
• Manufacturer: RTS

• Fitting Position: Rear Axle Left, Rear Axle Right, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.11
• Name: DY 37-27718
• Manufacturer: DYS

• Fitting Position: Front Axle, Lower, Rear
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65
• Height [mm]: 50
• Name: ALT 88894AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle, both sides, Rear
• Name: Puks
• Manufacturer: LMI

• Inner Diameter [mm]: 13
• Fitting Position: Rear, both sides, Front Axle
• Outer Diameter [mm]: 65.2
• Weight [kg]: 0.33
• Required quantity: 2
• Manufacturer: TEDGUM

• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 64.8
• Length [mm]: 50
• paired article number: 271402
• Weight [kg]: 0.34
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: behind the axle, Front Axle Left, Front Axle Right, Lower

• Weight [kg]: 0.26
• Fitting Position: Front Axle both sides, Lower, Rear
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 64.7
• Length [mm]: 50
• Manufacturer: RTS

• Thickness [mm]: 50
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65, 30
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.302
• Observe service information:
• Name: Puks - K„„ndmik VW P. GOLF7/A3/LEON 12-
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right, Front Axle Left, Rear
• Height [mm]: 50
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik VW P. GOLF7/A3/LEON 12-
• Manufacturer: MEY

• Fitting Position: Front Axle, inner, behind the axle, Lower
• Inner Diameter 1 [mm]: 13
• Outer Diameter 1 [mm]: 65
• Thickness 1 [mm]: 28
• Inner Diameter 2 [mm]: 13
• Outer Diameter 2 [mm]: 65
• Thickness 2 [mm]: 50
• Name: DE TD1784W
• Manufacturer: DELPHI

• Fitting Position: Rear Axle, Lower, in front of axle
• for PR number: 2H0, 2H5
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 60
• Thickness 1 [mm]: 64
• Inner Diameter 2 [mm]: 12
• Outer Diameter 2 [mm]: 60
• Thickness 2 [mm]: 45
• Name: DE TD1785W
• Manufacturer: DELPHI

• Thickness [mm]: 50
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65, 30
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.31
• Observe service information:
• Name: SW 30 93 8403
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• General Information: bushing
• Manufacturer: VIKA

• Weight [kg]: 0.168
• Fitting Position: Rear Axle both sides, Lower, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60.3
• Length [mm]: 63.8
• Manufacturer: RTS

• Width [mm]: 45
• Thickness [mm]: 45
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 41
• Material: Rubber/Metal
• Fitting Position: outer, Rear Axle Left, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Shape: slotted
• Weight [kg]: 0.07
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Puks - K„„ndmik VW T. A1/A3/LEON/OCTAVIA/GOLF VII 12- 45X12X41

• Width [mm]: 60
• Thickness [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 41
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Rear Axle Right, inner
• Mounting Type: Rubber-Metal Mount
• Shape: slotted
• Weight [kg]: 0.09
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.