• Transmission ID: QMF, QQG, RAG
• Block Separation:
• Connector Shape: D Shape
• Mounting Type: Screw Connection
• Number of pins: 2
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Manufacturer: TOPRAN

Transmission Type: 5-Speed Manual Transmission, 6-Speed Manual Transmission General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Mounting Type: Bolted
• Thread Size: M12 x 1,5
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• General Information: switch for reversing light
• Manufacturer: VIKA

• Weight [kg]: 0.03
• Number of connectors: 2
• Required quantity: 1
• External Thread [mm]: M12 x 1,5
• Spanner Size: 22
• General Information: switch for reversing light
• Manufacturer: VIKA

• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: DJKD
• Colour Coding: black
• Thread Size: M12x1,5
• Spanner Size: 22
• Manufacturer: FACET

• Thread Size: M12x1.5
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Engine Code: DJKD
• Colour Coding: black
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: EP 1.860.215
• Manufacturer: EPS

• General Information: switch for reversing light
• Manufacturer: BORSEHUNG

• Transmission Type: Manual Transmission
• Length [mm]: 22
• Thread Size: M12x1.5
• Operating Mode: Electric
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring, without cable
• Manufacturer: FAST

• General Information: switch for reversing light
• Manufacturer: BORSEHUNG

• Transmission Type: Manual Transmission
• Length [mm]: 22
• Width [mm]: 22
• Height [mm]: 62
• Thread Size: M12 x 1,5
• Operating Mode: Electric
• Mounting Type: Bolted
• Number of pins: 2
• Combi Switch Function: Normally Open Contact
• Rated Voltage [V]: 12
• Supplementary Article/Info 2: with seal ring, without cable
• Housing Colour: black
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: DJKD
• Colour Coding: brown
• Thread Size: M12x1,5
• Spanner Size: 22
• Manufacturer: FACET

• Engine Code: DJKD
• Colour Coding: brown
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: EP 1.860.266
• Manufacturer: EPS

• Fabrication Number: ECW-VW-001
• Number of pins: 4
• Operating Mode: Mechanical
• Manufacturer: NTY
• Name: NTY ECW-VW-001

• Light Function: for low beam, for rear fog light, for marker lamp
• Number of pins: 10
• Manufacturer: ABAKUS
• Additional information: 135-02-027 ABAK
• Lisainfo: 135-02-027 ABAK

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Mounting Type: Bolted
• Voltage [V]: 12
• Number of pins: 2
• Combi Switch Function: Normally Open Contact
• Thread Size: M12x1,5
• Operating Mode: Electric
• Spanner Size: 22
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA

• Vehicle Equipment: for vehicles with automatic low beam switch
• Number of pins: 10
• Colour: chrome/black
• Manufacturer: ABAKUS LORO

Light Function: for low beam, for front fog light, for rear fog light, for marker lamp General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Vehicle Equipment: for vehicles without automatic low beam switch
• Fabrication Number: EWS-VW-156
• Manufacturer: NTY

• Colour: chrome/black
• Switch Lighting: red
• Control Type: Turn knob control
• Manufacturer: JP GROUP A/S
• Lisainfo: Switch, headlight
• Additional information: Switch, headlight

Combi Switch Function: On/Off Switch, with fog-lamp function, with rear fog light function Vehicle Equipment: for vehicles without automatic low beam switch, for vehicles without front fog light

• Colour: chrome/black
• Control Type: Turn knob control, Pull switch control
• Switch Lighting: red
• Colour Code: XSH
• Fabrication Number: EWS-VW-080
• Manufacturer: NTY
• Name: NTY EWS-VW-080

Vehicle Equipment: for vehicles without automatic low beam switch, for vehicles without front fog light Combi Switch Function: On/Off Switch, with fog-lamp function, with rear fog light function

• Colour: chrome/black
• Control Type: Turn knob control
• Switch Lighting: red
• Lisainfo: Switch, headlight
• Additional information: Switch, headlight

Combi Switch Function: On/Off Switch, with fog-lamp function, with rear fog light function Vehicle Equipment: for vehicles with front fog light, for vehicles with automatic low beam switch, for vehicles with coming home function, for vehicles with leaving home function

• Colour: chrome/black
• Number of pins: 10
• Manufacturer: FAST

Combi Switch Function: with rear fog light function, without fog-lamp function

• Engine Code: DJKD
• Housing Colour: black
• Operating Mode: Electronic
• Manufacturer: FACET

• Engine Code: DJKD
• Housing Colour: black
• Operating Mode: Electronic
• Name: EP 1.810.232
• Manufacturer: EPS

• Voltage [V]: 12
• Light Function: with low beam, with rear fog light
• Vehicle Equipment: for vehicles without automatic daylight switch
• Number of pins: 10
• Guarantee: 3 years guarantee
• Weight [kg]: 0.09
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 36SKV027

• Combi Switch Function: with rear fog light function
• Weight [kg]: 0.08
• Manufacturer: OYODO

• Housing Colour: black
• Number of connectors: 4
• Operating Mode: Electric
• Weight [kg]: 0.02
• for OE number: 5G0 698 459
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Colour Code: XSH
• Colour: chrome/black
• Switch Lighting: red
• Control Type: Turn knob control, Pull switch control
• Always compare old and new part (in particular OE No.):
• Manufacturer: TOPRAN HANS PRIES

Combi Switch Function: On/Off Switch, with fog-lamp function, with rear fog light function Vehicle Equipment: for vehicles with front fog light, for vehicles without automatic low beam switch General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• General Information: switch for lighting
• Manufacturer: VIKA

• Colour Code: XSH
• Colour: chrome/black
• Switch Lighting: red
• Control Type: Turn knob control, Pull switch control
• Manufacturer: TOPRAN

Combi Switch Function: On/Off Switch, with fog-lamp function, with rear fog light function Vehicle Equipment: for vehicles without front fog light, for vehicles without automatic low beam switch General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• General Information: switch for lighting
• Manufacturer: VIKA

• Operating Mode: Mechanical
• Fitting Position: at master cylinder
• Sensor Type: Hall Sensor
• Number of pins: 4
• Supplementary Article/Info 2: with fastening clamp
• Connector Shape: oval
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Colour: chrome/black
• Combi Switch Function: with rear fog light function
• Colour Code: XSH
• General Information: switch for lighting
• Manufacturer: VIKA

• Colour Code: XSH
• Colour: chrome/black
• Housing material: Plastic
• Control Type: Turn knob control
• Switch Lighting: red
• Mounting Type: Clipped
• Manufacturer: TOPRAN

Combi Switch Function: On/Off Switch, with fog-lamp function, with rear fog light function Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles Vehicle Equipment: for vehicles with automatic low beam switch, for vehicles with leaving home function, for vehicles with coming home function, for vehicles with front fog light General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Operating Mode: Mechanical
• Number of pins: 4
• for OE number: 5G0698459
• Manufacturer: MEAT&DORIA

• General Information: switch for lighting
• Manufacturer: VIKA

• Colour: chrome/black
• Colour Code: XSH
• General Information: switch for lighting
• Manufacturer: VIKA

Vehicle Equipment: for vehicles with coming home function, for vehicles with leaving home function, for vehicles with direct shift transmission Combi Switch Function: with rear fog light function, with fog-lamp function

• Operating Mode: Electric
• Mounting Type: Bolted
• Sensor Type: Hall Sensor
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6DD008622991
• Manufacturer: HELLA

• Engine Code: DJKD
• Number of pins: 4
• Operating Mode: Mechanical
• Fitting Position: Footwell
• Connector Shape: oval
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 4
• Sensor Type: Hall Sensor
• Fitting Position: Brake Booster, at master cylinder
• Operating Mode: Electric
• Manufacturer: METZGER

• Surface: Chromed
• Light Function: with low beam
• General Information: front and rear fog lights; chrome
• Manufacturer: VIKA

Combi Switch Function: with daylight function, with rear fog light function, with fog-lamp function

• Weight [kg]: 0.07
• Required quantity: 1
• Outer Diameter [mm]: 63
• Number of connectors: 10
• Colour: black
• Control Type: Turn knob control
• General Information: switch for lighting
• Manufacturer: VIKA

• Vehicle Equipment: for vehicles with automatic low beam switch
• Number of pins: 10
• Fabrication Number: EWS-VW-157
• Manufacturer: NTY

• Light Function: with low beam
• General Information: switch for lighting
• Manufacturer: VIKA

Combi Switch Function: with daylight function, with rear fog light function, with fog-lamp function

• Surface: Chromed
• Colour: chrome
• General Information: front and rear fog lights; chrome
• Manufacturer: BORSEHUNG

• Colour: chrome/black
• Combi Switch Function: with rear fog light function
• Fitting Position: Dashboard
• Colour Code: XSH
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 10
• Colour: chrome/black
• Manufacturer: METZGER

Combi Switch Function: without fog-lamp function, with rear fog light function Vehicle Equipment: for vehicles without coming home function, for vehicles without leaving home function

• for PR number: 9Q0
• Colour Code: 9B9
• Colour: black
• Material: GRP (Glass fibre Reinforced Plastic)
• Mounting Type: Plugged
• Always compare old and new part (in particular OE No.):
• Manufacturer: TOPRAN

Vehicle Equipment: for vehicles without on-board computer, for vehicles with cruise control, for vehicles with controllable windscreen wiper intervals Combi Switch Function: with CC, with indicator function, with high beam function, with headlight flasher, with park light function, with wipe-wash function, with rear wipe-wash function General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Colour: chrome/black
• Fitting Position: Dashboard
• Number of pins: 10
• Control Type: Turn knob control
• Colour Code: XSH
• Housing material: Plastic
• Manufacturer: VEMO

Vehicle Equipment: for vehicles with leaving home function, for vehicles with coming home function, for vehicles with direct shift transmission, for vehicles with automatic low beam switch, for vehicles with front fog light Combi Switch Function: with rear fog light function, with fog-lamp function General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.