• Vehicle Equipment: for vehicles with check control system
• Cable Length [mm]: 1,025
• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-AU-007
• Manufacturer: NTY
• Name: NTY HCA-AU-007

• Vehicle Equipment: for vehicles without accelerator pedal sensor
• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Passive sensor
• Length [mm]: 1,100
• Manufacturer: JP GROUP
• Lisainfo: ABS sensor, front, left/right
• Additional information: ABS sensor, front, left/right

• Vehicle Identification Number (VIN) from: 3B-X-338 107
• Fitting Position: Rear Axle Left, Rear Axle Right
• Block Separation:
• Braking/Drive Dynamics: for vehicles with ESP
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Sensor Type: Inductive Sensor
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Length [mm]: 32
• Outer Diameter [mm]: 18.8
• Weight [kg]: 0.005
• Name: FIKSEERIMISHšLSS, RATTAP™™RETE ANDUR
• Manufacturer: FEB
• Additional information: F15340
• Lisainfo: F15340

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 18.8
• Manufacturer: FAST

• Fitting Position: Front Axle both sides
• Number of Teeth: 45
• Width [mm]: 11
• Inner Diameter [mm]: 77
• Outer Diameter [mm]: 81
• Fabrication Number: NZA-AU-001
• Manufacturer: NTY
• Name: NTY NZA-AU-001
• Lisainfo: 45 T 81 MM / 77 MM / 11 MM
• Additional information: 45 T 81 MM / 77 MM / 11 MM

• Fitting Position: Front Axle
• Width [mm]: 11
• Number of Teeth: 45
• Outer Diameter [mm]: 81
• Inner Diameter [mm]: 77
• Name: ANDUR,ABS
• Manufacturer: MAX

• Fitting Position: Front Axle both sides
• Width [mm]: 11
• Number of Teeth, ABS ring: 45
• Inner Diameter [mm]: 77
• Outer Diameter [mm]: 80.7
• Weight [kg]: 0.028
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Number of Teeth: 45
• Inner Diameter [mm]: 77
• Thickness [mm]: 11
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Inner Diameter [mm]: 76.8
• Width [mm]: 11
• Outer Diameter [mm]: 80.7
• Number of Teeth, ABS ring: 45
• Name: ANDUR,ABS
• Manufacturer: TRI
• Lisainfo: VAG
• Additional information: VAG

• Fitting Position: Front Axle
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 1,025
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 1,020
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Engine Code: APT, ARG, ADR
• Block Separation:
• Construction Year from: 12.1996
• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Overall Length [mm]: 1,100
• for OE number: 8D0 927 803
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Cable Length [mm]: 1,100
• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-AU-006
• Manufacturer: NTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Number of pins: 2
• Fabrication Number: HCA-VW-017
• Manufacturer: NTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Number of pins: 2, 4
• Fabrication Number: HCA-VW-018
• Manufacturer: NTY

• Engine Code: APT, ARG, ADR
• Block Separation:
• Construction Year from: 12.1996
• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Overall Length [mm]: 1,025
• for OE number: 8D0 927 803 B
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Vehicle Identification Number (VIN) to: 3B_X_600000
• Fitting Position: Front Axle
• Sensor Type: Inductive Sensor
• Length [mm]: 1,030
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Resistor [Ohm]: 1,650
• Cable Length [mm]: 1,090
• for OE number: 3B0927807B
• Number of pins: 2
• Manufacturer: MAGNETI MARELLI

• Sensor Type: Passive sensor
• Number of pins: 2
• Cable Length [mm]: 1,068
• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0016

• Construction Year to: 08.2000
• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Cable Length [mm]: 965
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Vehicle Identification Number (VIN) from: 3B-V-000 001
• Fitting Position: Front Axle
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Inductive Sensor
• Manufacturer: JP GROUP
• Lisainfo: ABS sensor, rear, left/right
• Additional information: ABS sensor, rear, left/right

• Vehicle Identification Number (VIN) from: 3B-Y-000001
• Construction Year to: 09.2000
• Required quantity: 2
• Fitting Position: Front Axle
• Length [mm]: 985
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle both sides
• Number of Teeth, ABS ring: 45
• Inner Diameter [mm]: 77
• Width [mm]: 11
• Manufacturer: METZGER

• Sensor Type: Passive sensor
• Number of pins: 4
• Cable Length [mm]: 980
• Fitting Position: Front Axle Right, Front Axle Left
• Name: SE DS0012
• Manufacturer: AUTOFREN SEINSA

• Construction Year to: 05.1999
• Vehicle Identification Number (VIN) to: 3B-X-600000
• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,035
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Required quantity: 2
• Fitting Position: Rear Axle
• Manufacturer: DELLO AUTOMEGA

Vehicle Equipment: for vehicles without headlight levelling (automatic)

• Fitting Position: Front
• Length [mm]: 1,000
• Voltage [V]: 12
• Weight [kg]: 0.15
• Colour: red/black
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV009

• Vehicle Identification Number (VIN) from: 3B-V-000 001
• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Passive sensor
• Manufacturer: JP GROUP
• Lisainfo: ABS sensor, front, left/right
• Additional information: ABS sensor, front, left/right

• Vehicle Equipment: for vehicles with brake pad wear indicator
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 1,031
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Vehicle Identification Number (VIN) to: 3B-X-600000
• Supplementary Article/Info 2: with cap, with sensor
• Material: Plastic
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) from: 3B-X-338107
• Fitting Position: Rear Axle, Rear Axle Right
• Block Separation:
• Braking/Drive Dynamics: for vehicles with ESP
• Required quantity: 2, 1
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,120
• Number of pins: 2
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Vehicle Identification Number (VIN) to: 3B-X-600000, 3B-Y-400000
• Block Separation:
• Material: Plastic
• Supplementary Article/Supplementary Info: with dummy connector
• Name: PAISUPAAK,PIDURIVEDELIK
• Manufacturer: MAX

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Plug housing design: Plug sleeve housing
• Manufacturer Restriction: BMW, Volvo, VAG
• Number of pins: 3
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabliparanduskomplekt, seadeelement- tulede ulatuse regul

• Construction Year to: 08.2000
• Block Separation:
• Quantity: 2
• Fitting Position: Rear Axle
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,070
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Supplementary Article/Info 2: with lid
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Manufacturer: JP GROUP
• Lisainfo: Brake fluid tank
• Additional information: Brake fluid tank

• Vehicle Equipment: for vehicles with accelerator pedal sensor
• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 1,025
• Sensor Type: Passive sensor
• Weight [kg]: 0.127
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear
• Length [mm]: 1,050
• Number of pins: 2
• Plug Type: Male
• Connector Shape: rectangular
• Voltage [V]: 12
• Weight [kg]: 0.16
• Colour: black
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year from: 12.1996
• Fitting Position: Front
• Length [mm]: 1,040
• Number of pins: 2
• Plug Type: Male
• Connector Shape: rectangular
• Voltage [V]: 12
• Weight [kg]: 0.14
• Colour: black
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 06SKV075
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle
• Construction Year to: 05.1999
• Vehicle Identification Number (VIN) to: 3B-X-600000
• for model code: 2 Pin
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,035
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP
• Quality class: PJ

• Fitting Position: Rear Axle
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: HUC

• Wear Warning Contact: prepared for wear indicator
• Sensor Type: Inductive Sensor
• Fitting Depth [mm]: 39.5
• for OE number: 8D0 927 803 D
• Fitting Position: Front Axle Right, Front Axle Left
• Overall Length [mm]: 990
• Length [mm]: 400
• Manufacturer: MEAT&DORIA

• Fitting Position: Front Axle
• for model code: 6 pin
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 965
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP
• Quality class: PJ

• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 1,100
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Equipment: for vehicles without accelerator pedal sensor
• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 1,100
• Sensor Type: Passive sensor
• Weight [kg]: 0.118
• Manufacturer: TOMEX BRAKES

• Vehicle Identification Number (VIN) to: 3B-Y-400 000
• Weight [kg]: 9.5
• New Part:
• Packaging length [cm]: 72.5
• Packaging width [cm]: 59
• Packaging height [cm]: 34

• Fitting Position: Rear Axle
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,070
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Vehicle Equipment: for vehicles without brake pad wear indicator
• Construction Year to: 04.1999
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 1,105
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) from: 3B-V-000 001
• Vehicle Identification Number (VIN) to: 3B-X-600 000
• Supplementary Article/Supplementary Info: with seal
• Fitting Position: Front Axle
• Length [mm]: 1,115
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Height [mm]: 39
• Supplementary Article/Info 2: with cable
• Required quantity: 2
• Resistor [Ohm]: 1,200
• Colour: black
• Cable Length [mm]: 1,070
• Sensor Type: Inductive Sensor, Passive sensor
• Number of pins: 2
• Number of connectors: 2
• Weight [kg]: 0.114
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Vehicle Identification Number (VIN) from: 3B-Y-000001
• Material: Plastic
• Supplementary Article/Info 2: with cap, with sensor
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Equipment: for vehicles with check control system
• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Mounting Type: Plug-in connection
• Manufacturer: BREMI

• Required quantity: 2
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Mounting Type: Plug-in connection
• Manufacturer: BREMI

• Construction Year from: 12.1996
• Fitting Position: Front Axle
• Wear Warning Contact: incl. wear warning contact
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO
• Name: HU 131417

• Fitting Position: Front Axle
• Wear Warning Contact: excl. wear warning contact
• Warranty: 5 years warranty
• Manufacturer: HUCO

• Engine Code: ARG, APT, ADR
• Vehicle Identification Number (VIN) to: 3B-X-600 000
• Block Separation:
• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.115
• for OE number: 8D0 927 803
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 2
• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles without headlight levelling
• General Information: ABS speed sensor; rear
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles with accelerator pedal sensor
• Required quantity: 2
• Cable Length [mm]: 995
• Fitting Depth [mm]: 39.6
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Front Axle
• Required quantity: 2
• Vehicle Equipment: for vehicles with check control system
• Cable Length [mm]: 960
• Sensor Type: Inductive Sensor
• Wear Warning Contact: prepared for wear indicator
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU012806921

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Rear Axle
• Required quantity: 2
• Cable Length [mm]: 1,020
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU012806901

Vehicle Equipment: for vehicles without headlight levelling (automatic) Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Rear Axle
• Required quantity: 2
• Cable Length [mm]: 1,010
• Fitting Depth [mm]: 25
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Quantity: 1
• Vehicle Identification Number (VIN) to: 3B-X-600 000
• Weight [kg]: 0.145
• Required quantity: 1
• General Information: fluid reservoir; brake master cylinder
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: 3BX600000
• Construction Year to: 04.1999
• Overall Length [mm]: 1,065
• Length [mm]: 39
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 1,000
• paired article number: 30002
• Weight [kg]: 0.12
• Manufacturer: A.B.S.

• Construction Year to: 04.1999
• Cable Length [mm]: 1,095
• Sensor Type: Inductive Sensor
• Fitting Position: Front Axle
• Number of pins: 2
• Manufacturer: FAE

• Supplementary Article/Info 2: with sensor, with lid
• Weight [kg]: 0.241
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 3BY000001
• Special Purpose Vehicle: not for armoured vehicles
• Construction Year from: 05.1999
• Overall Length [mm]: 1,190
• Length [mm]: 40
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 1,100
• Wear Warning Contact: with integrated wear warning contact
• Mounting Type: Plug-in connection
• paired article number: 30122
• Weight [kg]: 0.13
• Manufacturer: A.B.S.

• for OE number: 8E0 611 301
• Supplementary Article/Info 2: with lid
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Engine Code: ARG, APT
• Vehicle Identification Number (VIN) from: 3B-Y-000 001
• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.1
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Cable Length [mm]: 1,025
• Sensor Type: Inductive Sensor
• Fitting Position: Front Axle
• Number of pins: 2
• Manufacturer: FAE

• Fitting Position: Front
• General Information: ABS speed sensor; front
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) to: 3B-X-600 000, 3B-Y-400 000
• Block Separation:
• Number of connectors: 2
• Supplementary Article/Info 2: with lid, with sensor
• Weight [kg]: 0.145
• Name: PAISUPAAK,PIDURIVEDELIK
• Manufacturer: FEB

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Right
• Vehicle Identification Number (VIN) from: 3B-X-338 107
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Cable Length [mm]: 1,118
• Sensor Type: Passive sensor
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Supplementary Info: with seal
• Length [mm]: 1,020
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Number of pins: 6, 2
• Height [mm]: 39
• Supplementary Article/Info 2: with cable
• Required quantity: 2
• Resistor [Ohm]: 1,300
• Cable Length [mm]: 960
• Mounting Type: Plug-in connection
• Sensor Type: Inductive Sensor, Passive sensor
• Number of connectors: 2
• Weight [kg]: 0.122
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 12.1996
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with cable
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Manufacturer: BOSCH