• Fitting Position: frontal sided
• Siseläbimõõt [mm]: 35
• Välisläbimõõt [mm]: 48
• Laius (mm): 10
• Materjal: FPM (Fluor-Kautschuk)
• Manufacturer: JP GROUP
• Lisainfo: Oil seal, 35x48x10 mm
• Additional information: Oil seal, 35x48x10 mm

• Fitting Position: frontal sided
• Siseläbimõõt [mm]: 35
• Välisläbimõõt [mm]: 48
• Laius (mm): 10
• Manufacturer: JP GROUP
• Lisainfo: Oil seal, 35x48x10
• Additional information: Oil seal, 35x48x10

Materjal: PTFE (Polytetrafluorethylen)/ACM (Polyacryl-Kautschuk)

• Required quantity: 4
• Kõrgus (mm): 10
• Välisläbimõõt 1 [mm]: 47
• Siseläbimõõt 1 [mm]: 32
• Installatsiooni pool: ees
• Manufacturer: BGA

• Fitting Position: Front
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Fabrication Number: NUP-VW-012

• Fitting Position: frontal sided
• Engine Code: ACK, APR
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 47
• Kõrgus (mm): 10
• Manufacturer: DELLO AUTOMEGA
• Additional information: 190017010 DELLO
• Lisainfo: 190017010 DELLO

• Engine Code: ACK, APR, AQD
• Fitting Position: frontal sided
• Material: FPM (fluoride rubber)
• Inner Diameter 1 [mm]: 32
• Outer Diameter 1 [mm]: 47
• Height 1 [mm]: 10
• Swirl Type: Alternating Twist
• Dust Cover: with dust lip
• for OE number: 026103085D
• Name: VOLLI RONGASTIHEND, NUKKVOLL
• Manufacturer: COT
• Additional information: 12012709
• Lisainfo: 12012709

• Required quantity: 1
• Engine Code: APR, ACK
• Fitting Position: frontal sided
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: frontal sided
• Required quantity: 4
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 47
• Laius (mm): 10
• SVHC: SVHS aineid ei esine
• Manufacturer: INA
• Name: LU 413009310

• Required quantity: 4
• Fitting Position: frontal sided
• Engine Code: APR, AHA, AQD, ACK
• Block Separation:
• Materjal: FPM (Fluor-Kautschuk)
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 47
• Kõrgus (mm): 10
• Tüüp simmerling tihend: A SL
• Pöördeliik: Vahelduvkeere
• Name: VOLLI RONGASTIHEND, NUKKVOLL
• Manufacturer: REI
• Lisainfo: 81-19299-10
• Additional information: 81-19299-10

• Required quantity: 4
• Fitting Position: frontal sided, transmission sided
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 47
• Kõrgus (mm): 10
• Tüüp simmerling tihend: ASW
• Pöördeliik: Vahelduvkeere
• Materjal: FPM (Fluor-Kautschuk)/ACM (Polyacryl-Kautschuk)
• Tolmukaitse: koos tolmu kaitseäärisega
• alternatiivne remondikomplekt: 325.156
• Manufacturer: ELRING
• Lisainfo: 325.155 ELR
• Additional information: 325.155 ELR

• Engine Code: ACK
• Vehicle Identification Number (VIN) to: 4B-Y-036000
• Installatsiooni pool: stirnseitig
• Kõrgus (mm): 10
• Välisläbimõõt 1 [mm]: 48
• Siseläbimõõt 1 [mm]: 35
• Materjal: ACM((Polyacryl-Kautschuk)
• Manufacturer: BGA

• Required quantity: 4
• Thickness [mm]: 10
• for OE number: 068 103 085 E
• Fitting Position: frontal sided
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Weight [kg]: 0.023
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 4
• Fitting Position: frontal sided
• Engine Code: ACK, APR, AQD, AHA
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 47
• Kõrgus (mm): 10
• Pöördeliik: Vahelduvkeere
• Name: VOLLI RONGASTIHEND, NUKKVOLL
• Manufacturer: AJU

• Engine Code: AQD, APR, ACK
• Fitting Position: frontal sided
• Siseläbimõõt [mm]: 35
• Välisläbimõõt [mm]: 48
• Kõrgus (mm): 10
• Tolmukaitse: koos tolmu kaitseäärisega
• Manufacturer: TOPRAN

Materjal: PTFE (Polytetrafluorethylen)/ACM (Polyacryl-Kautschuk) Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 47
• Kõrgus (mm): 10
• Materjal: FPM (Fluor-Kautschuk)/ACM (Polyacryl-Kautschuk)
• Tolmukaitse: koos tolmu kaitseäärisega
• Pöördeliik: Vahelduvkeere
• Installatsiooni pool: stirnseitig
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 47
• Kõrgus (mm): 10
• Tolmukaitse: koos tolmu kaitseäärisega
• Pöördeliik: Vahelduvkeere
• Materjal: FPM (Fluor-Kautschuk)
• Installatsiooni pool: stirnseitig
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: frontal sided
• General Information: shaft oil seal
• Manufacturer: VIKA

• Required quantity: 4
• Fitting Position: frontal sided, transmission sided
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 47
• Kõrgus (mm): 10
• Tüüp simmerling tihend: ASW
• Pöördeliik: Vahelduvkeere
• Materjal: FPM (Fluor-Kautschuk)
• Tolmukaitse: koos tolmu kaitseäärisega
• alternatiivne remondikomplekt: 325.155
• Manufacturer: ELRING

• Fitting Position: frontal sided
• Vehicle Identification Number (VIN) to: 3B W 500 000
• Engine Code: APR, AHA
• Block Separation:
• Materjal: FPM (Fluor-Kautschuk)
• Siseläbimõõt [mm]: 35
• Välisläbimõõt [mm]: 48
• Kõrgus (mm): 10
• Tüüp simmerling tihend: A SL
• Pöördeliik: Paremkeere
• Name: VOLLI RONGASTIHEND, VŽNTVOLL
• Manufacturer: REI

• Fitting Position: frontal sided
• Siseläbimõõt [mm]: 35
• Välisläbimõõt [mm]: 48
• Kõrgus (mm): 10
• Tüüp simmerling tihend: ASW
• Pöördeliik: Paremkeere
• Materjal: FPM (Fluor-Kautschuk)
• Tolmukaitse: koos tolmu kaitseäärisega
• Manufacturer: ELRING

• Engine Code: APR, ACK
• Installatsiooni pool: kastipoolselt
• Siseläbimõõt [mm]: 85
• Välisläbimõõt [mm]: 105
• Jämedus/Tugevus (mm): 11
• Materjal: FPM (Fluor-Kautschuk)/ACM (Polyacryl-Kautschuk)
• Lisainfo: Oil seal for crankshaft, 85x105x11 mm
• Additional information: Oil seal for crankshaft, 85x105x11 mm

• Fitting Position: frontal sided
• Height [mm]: 10
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48

• Fitting Position: frontal sided
• Siseläbimõõt [mm]: 35
• Välisläbimõõt [mm]: 48
• Kõrgus (mm): 10
• Tüüp simmerling tihend: ASW
• Pöördeliik: Paremkeere
• Materjal: FPM (Fluor-Kautschuk)/ACM (Polyacryl-Kautschuk)
• Tolmukaitse: koos tolmu kaitseäärisega
• Manufacturer: ELRING

• Engine Code: AHA, AQD
• Installatsiooni pool: stirnseitig
• Siseläbimõõt 1 [mm]: 32
• Välisläbimõõt 1 [mm]: 47
• Kõrgus 1 (mm): 10
• Materjal: PTFE (Polytetrafluorethylen)
• Pöördeliik: Paremkeere
• Tolmukaitse: koos tolmu kaitseäärisega
• OE-numbri jaoks: 038103085A
• Name: VOLLI RONGASTIHEND, NUKKVOLL
• Manufacturer: COT
• Additional information: 20026413
• Lisainfo: 20026413

• Engine Code: ACK
• Installatsiooni pool: stirnseitig
• Kõrgus (mm): 10
• Välisläbimõõt 1 [mm]: 48
• Siseläbimõõt 1 [mm]: 35
• Manufacturer: BGA

• Engine Code: ACK, APR
• Jämedus/Tugevus (mm): 11
• Siseläbimõõt [mm]: 85
• Välisläbimõõt [mm]: 105
• Materjal: FPM (Fluor-Kautschuk)
• Installatsiooni pool: kastipoolselt
• Kaal (kg): 0,058
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Axle beam
• General Information: shaft oil seal
• Manufacturer: BORSEHUNG

• Fitting Position: frontal sided
• Height [mm]: 10
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Swirl Type: Right-hand Twist
• Radial Shaft Seal Design: ASW
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE

• Fitting Position: frontal sided
• Vehicle Identification Number (VIN) to: 4B-Y-036000
• Engine Code: ACK, APR, AQD
• Siseläbimõõt [mm]: 35
• Välisläbimõõt [mm]: 48
• Kõrgus (mm): 10
• Pöördeliik: Paremkeere
• Name: VOLLI RONGASTIHEND, VŽNTVOLL
• Manufacturer: AJU

• Engine Code: ACK, APR
• Jämedus/Tugevus (mm): 11
• Siseläbimõõt [mm]: 85
• Välisläbimõõt [mm]: 105
• Materjal: FPM (Fluor-Kautschuk)
• Installatsiooni pool: kastipoolselt
• Kaal (kg): 0,058
• Name: SW 30 90 1090
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: frontal sided
• Siseläbimõõt [mm]: 35
• Välisläbimõõt [mm]: 48
• Kõrgus (mm): 10
• Tüüp simmerling tihend: ASW
• Pöördeliik: Paremkeere
• Tolmukaitse: koos tolmu kaitseäärisega
• Piirangutega toode/piirangu info 2: koos paigaldushülsiga
• Jälgida montaaži juhiseid:
• Montaažiinfo: Paigaldamine kuiv ja ilma täiendava õli ja rasva
• Manufacturer: ELRING
• Lisainfo: 155.560 ELR
• Additional information: 155.560 ELR

Materjal: PTFE (Polytetrafluorethylen)/ACM (Polyacryl-Kautschuk)

• Engine Code: AHA, AQD
• Installatsiooni pool: stirnseitig
• Siseläbimõõt 1 [mm]: 35
• Välisläbimõõt 1 [mm]: 48
• Kõrgus 1 (mm): 10
• Materjal: PTFE (Polytetrafluorethylen)
• Pöördeliik: Paremkeere
• Tolmukaitse: koos tolmu kaitseäärisega
• Piirangutega toode/piirangu info 2: koos paigaldushülssidega
• OE-numbri jaoks: 038103085
• Name: VOLLI RONGASTIHEND, VŽNTVOLL
• Manufacturer: COT
• Additional information: 20026412B COR
• Lisainfo: 20026412B COR

• Jämedus/Tugevus (mm): 10
• Siseläbimõõt [mm]: 35
• Välisläbimõõt [mm]: 48
• Installatsiooni pool: stirnseitig
• Kaal (kg): 0,01
• Hooldusinfot jälgida:
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: frontal sided
• Engine Code: ACK, APR, AQD, AHA
• Siseläbimõõt [mm]: 35
• Välisläbimõõt [mm]: 48
• Kõrgus (mm): 10
• Pöördeliik: Paremkeere
• Name: VOLLI RONGASTIHEND, VŽNTVOLL
• Manufacturer: AJU

• Required quantity: 1
• Engine Code: APR, ACK
• Fitting Position: transmission sided
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: transmission sided
• Siseläbimõõt [mm]: 85
• Välisläbimõõt [mm]: 105
• Kõrgus (mm): 12
• Tüüp simmerling tihend: AW/BS
• Pöördeliik: Vasakkeere
• Tolmukaitse: koos tolmu kaitseäärisega
• Jälgida montaaži juhiseid:
• Piirangutega toode/piirangu info 2: koos paigaldushülsiga
• Montaažiinfo: Paigaldamine kuiv ja ilma täiendava õli ja rasva
• Name: Rongastihend
• Manufacturer: ELR

Materjal: PTFE (Polytetrafluorethylen)/ACM (Polyacryl-Kautschuk)

• Installatsiooni pool: kastipoolselt
• Siseläbimõõt 1 [mm]: 98
• Välisläbimõõt 1 [mm]: 110
• Kõrgus 1 (mm): 8,5
• Materjal: FPM (Fluor-Kautschuk)
• Pöördeliik: Vasakkeere
• Tolmukaitse: koos tolmu kaitseäärisega
• OE-numbri jaoks: 1369754
• Name: VOLLI RONGASTIHEND, VŽNTVOLL
• Manufacturer: COT
• Additional information: 15510087B COR
• Lisainfo: 15510087B COR

• OE-numbri jaoks: 03G 105 021 C
• Jämedus/Tugevus (mm): 10
• Siseläbimõõt [mm]: 35
• Installatsiooni pool: stirnseitig
• Välisläbimõõt [mm]: 48
• Kaal (kg): 0,031
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Outer Diameter [mm]: 47
• Thickness [mm]: 10
• Inner Diameter [mm]: 32
• Fitting Position: transmission sided
• Weight [kg]: 0.195
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity: 1
• Vehicle Identification Number (VIN) from: 3B-X-060 001
• Fitting Position: transmission sided
• Supplementary Article/Info 2: with flange
• Weight [kg]: 0.418
• Required quantity: 1
• Inner Diameter [mm]: 85
• General Information: seal ring
• Manufacturer: VIKA

• Siseläbimõõt [mm]: 85
• Materjal: PTFE (Polytetrafluorethylen)
• Installatsiooni pool: kastipoolselt
• Kaal (kg): 0,418
• Piirangutega toode/piirangu info 2: koos flantsiga
• Hooldusinfot jälgida:
• Name: VOLLI RONGASTIHEND, VŽNTVOLL
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: ACK, APR, AQD
• Vehicle Identification Number (VIN) from: 3BX060001 ->
• Installatsiooni pool: kastipoolselt
• Siseläbimõõt 1 [mm]: 85
• Välisläbimõõt 1 [mm]: 158,2
• Välisläbimõõt 2 [mm]: 235
• Kõrgus 1 (mm): 14,3
• Piirangutega toode/piirangu info 2: koos flantsiga, koos paigaldushülssidega
• OE-numbri jaoks: 078103171L
• Manufacturer: CORTECO
• Name: CO 19036697

Materjal: TFE (Tetrafluorethylen)/ACM (Polyacryl-kautšuk)/lausriie