• Switch point from [bar]: 0.15
• Switch point to [bar]: 0.35
• Colour Coding: blue
• Number of connectors: 1
• External Thread [mm]: M10x1
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Switch Pressure [bar]: 1.4
• Number of connectors: 1
• External Thread [mm]: M10x1
• Colour Coding: black
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Number of pins: 2
• Colour: blue
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Construction Year from: 08.1987
• Number of pins: 2
• Housing Colour: black
• Connector Shape: angular
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Number of pins: 7
• Coil Ignition System: Transistor Ignition (TI)
• Lisainfo: Switch unit for TCI
• Additional information: Switch unit for TCI

• Colour: black
• Number of pins: 1
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) from: F 24-F-000 001
• Thread Size: M10x1
• Length [mm]: 46
• Spanner Size: 24
• Number of pins: 1
• Colour: black
• Manufacturer: DELLO AUTOMEGA

• Construction Year from: 01.1986
• Thread Size: M10x1
• Length [mm]: 46
• Spanner Size: 24
• Colour Coding: white
• Number of pins: 1
• Manufacturer: DELLO AUTOMEGA

• Thread Size: M10x1
• Length [mm]: 46
• Spanner Size: 24
• Colour: blue
• Number of pins: 1
• Manufacturer: DELLO AUTOMEGA

• Plug Type: Blade Terminal
• Operating Mode: Hydraulic
• Colour Coding: blue
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Number of pins: 1
• Control Range [bar]: 0,15 - 0,35
• Manufacturer: TOPRAN
• Lisainfo: 100 345 HP
• Additional information: 100 345 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) from: F 24-F-000 001
• Thread Size: M10x1
• Colour: grey
• Number of pins: 1
• Spanner Size: 24
• Manufacturer: DELLO AUTOMEGA

• Thread Size: M10
• Colour Coding: brown
• Number of pins: 1
• Switch Pressure [bar]: 0.3
• Spanner Size: 24
• Supplementary Article/Supplementary Info: with seal
• for OE number: 056919081C
• Manufacturer: DELLO AUTOMEGA

• Plug Type: Blade Terminal
• Operating Mode: Hydraulic
• Colour Coding: brown
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Shifting Points [bar]: 0.3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Trim Level: SR
• Thread Size: M10x1
• Colour: black
• Number of pins: 1
• Spanner Size: 14
• Length [mm]: 25
• Manufacturer: DELLO AUTOMEGA

• Plug Type: Blade Terminal
• Operating Mode: Hydraulic
• Colour Coding: white
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Number of pins: 1
• Control Range [bar]: 1,6 - 2,0
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 01.1986
• Switch point from [bar]: 1.6
• Switch point to [bar]: 2
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Colour Coding: white
• Supplementary Article/Info 2: with seal ring
• Surface: Zinc-coated
• Length [mm]: 46
• Weight [kg]: 0.03
• Required quantity: 1
• External Thread [mm]: M10 x 1
• Spanner Size: 24
• Number of connectors: 1
• Thread Length [mm]: 13
• Switch point from [bar]: 1.6
• Switch point to [bar]: 2
• General Information: oil pressure switch
• Manufacturer: VIKA

• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Number of pins: 2
• Colour Coding: blue
• Manufacturer: TOPRAN HANS PRIES
• Lisainfo: 100 191 HP
• Additional information: 100 191 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Colour: blue
• Diameter [mm]: 20
• Manufacturer: DELLO AUTOMEGA

• Construction Year from: 08.1987
• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Number of pins: 2
• Colour Coding: black/green
• Manufacturer: TOPRAN HANS PRIES
• Lisainfo: 103 327 HP
• Additional information: 103 327 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Switch point from [bar]: 0.75
• Switch point to [bar]: 1.05
• External Thread [mm]: M10x1
• Number of connectors: 1
• Colour Coding: grey
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Switch point from [bar]: 0.15
• Length [mm]: 46
• Switch point to [bar]: 0.35
• Inner Diameter [mm]: 2.54
• External Thread Size: M10 x 1
• Thread Length [mm]: 13
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: blue
• Surface: Zinc-coated
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M 10x1
• Housing Colour: black
• Pressure [bar]: 0.4
• Manufacturer: FAE

• Colour Coding: black/green
• Connector Shape: rectangular
• Number of pins: 2
• Outer Diameter [mm]: 20
• for OE number: 1669949
• Manufacturer: DELLO AUTOMEGA

• Housing Colour: blue
• for OE number: 025906041A
• Manufacturer: KAMOKA

• Switch point from [bar]: 0.15
• Length [mm]: 46
• Switch point to [bar]: 0.35
• Inner Diameter [mm]: 2.54
• External Thread Size: M10 x 1
• Thread Length [mm]: 13
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: blue
• Surface: Zinc-coated
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 30 23 0002

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Colour Coding: black
• Number of pins: 1
• Temperature range to [°C]: 125
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Sensor Type: NTC Sensor
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 251919501A
• Manufacturer: KAMOKA

• Supplementary Article/Info 2: with seal ring
• Surface: Zinc-coated
• Colour Coding: blue
• Length [mm]: 46
• Weight [kg]: 0.031
• Required quantity: 1
• Control Range [bar]: 0,15 - 0,35
• External Thread [mm]: M10 x 1
• Spanner Size: 24
• Inner Diameter [mm]: 2.54
• Number of connectors: 1
• Thread Length [mm]: 13
• General Information: oil pressure switch
• Manufacturer: VIKA

• Pressure [bar]: 3.5
• Housing Colour: blue
• Thread Size: M10×1-6g
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: DELPHI
• Name: DE SW90009
• Lisainfo: SW90009
• Additional information: SW90009

• Construction Year from: 01.1986
• Switch point from [bar]: 1.6
• Length [mm]: 46
• Switch point to [bar]: 2
• External Thread Size: M10 x 1
• Thread Length [mm]: 13
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: white
• Surface: Zinc-coated
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 30 23 0001

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pressure [bar]: 0.3
• Thread Size: M10 x 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Connector Shape: round
• Number of pins: 2
• Colour Coding: black
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Colour: black
• Pressure [bar]: 1.4
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Required quantity: 1
• Colour: grey
• Pressure [bar]: 0.9
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: MV
• Pressure [bar]: 2
• Thread Size: M10x1
• Spanner Size: 24
• Name: EP 1.800.045
• Manufacturer: EPS

• Required quantity: 1
• Colour: blue
• Shifting Points [bar]: 0.25
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Required quantity: 1
• Colour: white
• Pressure [bar]: 1.8
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 2
• Connector Shape: rectangular
• Socket colour: blue
• Diameter [mm]: 25.5
• Fitted Diameter [mm]: 20
• for OE number: 025 906 041 A, 95VW-12A648-BA, A 002 542 07 18
• Manufacturer: MEAT&DORIA

• Pressure [bar]: 0.25
• Thread Size: M10 x 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Supplementary Article/Supplementary Info: with seal
• Thread Size: M10x1,0
• Control Range [bar]: 0,15 - 0,35
• Colour: blue
• Weight [kg]: 0.038
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 1
• Thread Size: M 10x1
• Colour: brown
• Spanner Size: 24
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Pressure [bar]: 0.25
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thread Size: M10x1,0
• Colour: white
• Weight [kg]: 0.031
• Pressure from [bar]: 0.7
• Pressure to [bar]: 1
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Switch point from [bar]: 1.2
• Length [mm]: 46
• Switch point to [bar]: 1.5
• Inner Diameter [mm]: 2.54
• External Thread Size: M10 x 1
• Thread Length [mm]: 13
• Spanner Size: 24
• Colour Coding: black
• Surface: Zinc-coated
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 23 0003
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Plug Type: Blade Terminal
• Operating Mode: Hydraulic
• Colour Coding: grey
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Number of pins: 1
• Control Range [bar]: 0,75 - 1,05
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Colour Coding: black
• Lisainfo: Sender for water temperature gauge, 2 pins
• Additional information: Sender for water temperature gauge, 2 pins

• Switch point from [bar]: 1.2
• Length [mm]: 46
• Switch point to [bar]: 1.5
• Inner Diameter [mm]: 2.54
• External Thread Size: M10 x 1
• Thread Length [mm]: 13
• Spanner Size: 24
• Colour Coding: black
• Surface: Zinc-coated
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M 10x1 con.
• Housing Colour: black
• Pressure [bar]: 0.4
• Manufacturer: FAE

• Connector Shape: round
• Number of pins: 2
• Fitted Diameter [mm]: 20
• Temperature range from [°C]: 55
• Temperature range to [°C]: 65
• Colour Coding: blue
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: M10x1,0
• Control Range [bar]: 1,2 - 1,6
• Colour: black
• Weight [kg]: 0.028
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 2
• Colour Coding: green
• Weight [kg]: 0.02
• Manufacturer: SWAG
• Name: SW 30 91 8666

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Switch point from [bar]: 0.75
• Length [mm]: 46
• Switch point to [bar]: 1.05
• Inner Diameter [mm]: 2.48
• External Thread Size: M10 x 1
• Thread Length [mm]: 13
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: grey
• Surface: Zinc-coated
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 30 23 0004

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 46
• Switch point from [bar]: 0.75
• Switch point to [bar]: 1.05
• Inner Diameter [mm]: 2.48
• External Thread Size: M10 x 1
• Thread Length [mm]: 13
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: grey
• Surface: Zinc-coated
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Colour Coding: green
• Weight [kg]: 0.02
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Combi Switch Function: Normally Closed Contact
• Current Strength [A]: 0.25
• Thread Size: M10x1
• Spanner Size: 24
• Pressure from [bar]: 0.15
• Pressure to [bar]: 0.35
• Number of pins: 1
• Plug Type: Blade Terminal
• Corresponds to the original part in colour: blue
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6ZL003259641

• Sensor Type: NTC Sensor
• Mounting Type: Clipped
• Connector Shape: rectangular
• Number of pins: 2
• for OE number: 025906041A
• Supplementary Article/Info 2: with mounting parts
• Manufacturer: NRF

• Construction Year from: 01.1988
• Diameter [mm]: 26
• Length [mm]: 35
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• for OE number: 251 919 501 D
• Housing Colour: black
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Required quantity: 1
• Number of pins: 2
• Colour: black
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Diameter [mm]: 20
• Number of pins: 2
• Manufacturer: ERA

• Number of connectors: 2
• Colour: blue
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with retaining spring, with seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Colour: blue
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Name: SW 30 93 4762
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 01.1992
• Connector Shape: rectangular
• Material: Brass
• Number of pins: 2
• Plug Type: Male
• Sensor Type: NTC Sensor
• Spanner Size: 20 mm
• Thread Size: not have

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Length [mm]: 37
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• for OE number: 025 906 041 A
• Supplementary Article/Supplementary Info: with seal
• Colour Coding: blue
• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M20
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

• Engine Code: MV
• Manufacturer: EPS

• Mounting Type: Plugged
• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 322
• Supplementary Article/Supplementary Info: with seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Colour: blue
• Sensor Type: NTC Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with retaining ring
• Corresponds to the original part in colour: blue
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107551

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Number of circuits: 3
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Number of circuits: 3
• Overall Length [mm]: 989
• Lambda Sensor: Heated
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Technical Information Number: Universal
• Overall Length [mm]: 315
• Number of pins: 3
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Length [mm]: 1,215
• Number of circuits: 3
• Resistor [Ohm]: 4.5
• Conductor Number: 3
• Cable Length [mm]: 1,215
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM078

• Number of circuits: 3
• Overall Length [mm]: 1,236
• Lambda Sensor: Heated
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,215
• Number of circuits: 3
• Weight [kg]: 0.13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV066
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,670
• Number of circuits: 3
• Weight [kg]: 0.23
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV546

• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 985
• Number of circuits: 3
• Weight [kg]: 0.18
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Engine Code: MV, SR
• Cable Length [mm]: 1
• Manufacturer: DELPHI

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Construction Year from: 07.1991
• Vehicle Identification Number (VIN) from: 24-M-105 001
• Manufacturer: BOSCH

• Weight [kg]: 0.059
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.