Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: AAB
- Colour: black
- Diameter [mm]: 26
- Length [mm]: 35
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with seal ring
- for OE number: 251 919 501 D
- Housing Colour: black
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 2
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for relay slot number: 12
- Relay Number: 102
- Rated Voltage [V]: 12
-
Relay function: Pre-
glow device - for OE number: 191 911 261C
-
Name: RELEE,
HOOGSSTEEM - Manufacturer: HAN
- Lisainfo: 102 931 HP
- Additional information: 102 931 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Glow Plug Design: after-
glow capable, Pencil- type Glow Plug - Manufacturer: JP GROUP
-
Lisainfo: Relay,
glowing, 12 Volt, 70 Amp -
Additional information: Relay,
glowing, 12 Volt, 70 Amp
- Voltage [V]: 12
- Current Strength [A]: 70
- Number of pins: 7
- Manufacturer: JP GROUP
-
Lisainfo: Relay,
glowing, 12 Volt, 70 Amp, economy version -
Additional information: Relay,
glowing, 12 Volt, 70 Amp, economy version
- Relay Number: 12
-
Vehicle Identification Number (VIN) from: 70-
T- 200 001, 70- N- 100 001 -
Vehicle Identification Number (VIN) to: 70-
T- 070 000, 70- T- 199 000 - Manufacturer: DELLO AUTOMEGA
-
Vehicle Identification Number (VIN) to: 70-
N- 100 000 - Manufacturer: DELLO AUTOMEGA
- for relay slot number: 12
-
Vehicle Identification Number (VIN) to: 70-
N- 100000 - Rated Voltage [V]: 12
-
Relay function: Pre-
glow device - for OE number: 443 911 261
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: AAB
- Number of pins: 2
- Colour: black
- Manufacturer: EPS
- for relay slot number: 12
-
Vehicle Identification Number (VIN) from: 70-
N- 100001 - Relay Number: 102
- for OE number: 191 911 261C
- Voltage [V]: 12
-
Name: RELEE,
HOOGSSTEEM - Manufacturer: MAX
-
Lisainfo: 50-
0095 -
Additional information: 50-
0095
-
Vehicle Identification Number (VIN) to: 70-
N- 100001 - Supplementary Article/Supplementary Info: with external temperature measurement
-
Glow Plug Design: after-
glow capable - Number of pins: 7
- Pre-glow time [s]: 8
-
Name: RELEE,
HOOGSSTEEM - Manufacturer: MAX
- Lisainfo: 103718DE5
- Additional information: 103718DE5
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Voltage [V]: 12
- Current Strength [A]: 70
- Number of pins: 7
- Manufacturer: JP GROUP
-
Lisainfo: Relay,
glowing, 12 Volt, 70 Amp, Germany -
Additional information: Relay,
glowing, 12 Volt, 70 Amp, Germany
- Engine Code: AAB
-
Vehicle Identification Number (VIN) to: 70-
N- 100 001 - Operating voltage [V]: 12
- Warranty: 5 years warranty
- Manufacturer: HÃCO
- Name: HU 132061
General Information: Recommendation: Use grease for glow plugs 134100 = 10g. or 134101 = 100g., see accessory lists.
- Voltage [V]: 12
- Number of connectors: 7
- Weight [kg]: 0.04
- Fitting Position: Engine Compartment
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AAB
- Warranty: 5 years warranty
- Manufacturer: HÃCO
- Name: HU 132062
- Additional information: 132062 HUCO
- Lisainfo: 132062 HUCO
General Information: Recommendation: Use grease for glow plugs 134100 = 10g. or 134101 = 100g., see accessory lists.
- Construction Year from: 04.1992
-
Vehicle Identification Number (VIN) from: 70-
N- 100 001 - Voltage [V]: 12
- Current Strength [A]: 70
- Number of pins: 7
- Weight [kg]: 0.048
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AAB
-
Vehicle Identification Number (VIN) to: 70-
N- 100 001 - Voltage [V]: 12
- Number of pins: 7
- Weight [kg]: 0.06
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Operating voltage [V]: 12
- Check OE number:
- Warranty: 5 years warranty
- Manufacturer: HUCO
- Name: HU 132063
General Information: Recommendation: Use grease for glow plugs 134100 = 10g. or 134101 = 100g., see accessory lists.
-
Vehicle Identification Number (VIN) to: 70-
N- 100 001 - Supplementary Article/Supplementary Info: with external temperature measurement
- Voltage [V]: 12
-
Glow Plug Design: after-
glow capable - Number of pins: 7
- Pre-glow time [s]: 8
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 4RV008188171
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Number of Cylinders: 6,
5 - Voltage [V]: 12
-
Glow Plug Design: after-
glow capable - Pre-glow time [s]: 6
- Post-glow time [s]: 180
-
Name: JUHTSEADE,
HOOGEAEG - Manufacturer: BER
-
Vehicle Identification Number (VIN) from: 70-
N- 100 001 - Supplementary Article/Supplementary Info: with external temperature measurement
- Voltage [V]: 12
-
Glow Plug Design: after-
glow capable - Number of pins: 7
- Pre-glow time [s]: 7
- Assy./disassy. by qualified personnel required!:
-
Name: Juhtseade,
hoogeaeg - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Glow Plug Design: Pencil-
type Glow Plug, after- glow capable - Manufacturer: BOSCH