Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Required quantity: 4
- Electrode Gap [mm]: 0.8
- Tightening Torque [Nm]: 28
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 19
-
Spanner Size: 20,
8 - Spark Position [mm]: 3
- Number of pins: 1
- Name: STEKNAL
- Manufacturer: BOS
- Electrode Gap [mm]: 0.7
-
Thread Size: M14 x 1,
25 - Spanner Size: 21
-
Spark Plug: 1 -
Earthed Electrode - Thread Length [mm]: 19
- Weight [kg]: 0.056
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: DS
-
Fuel Type: CNG/
LPG - Supplementary Article/Info 2: Electrode gap must be set for operation on gas
-
Replace after km: 15,
000 - Required quantity: 4
- Electrode Gap [mm]: 0.8
- Tightening Torque [Nm]: 28
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 19
-
Spanner Size: 20,
8 - Spark Position [mm]: 3
- Number of pins: 1
- Name: STEKNAL
- Manufacturer: BOS
-
External Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spanner Size: 21
- Electrode Gap [mm]: 0.8
-
Spark Plug: with gasket seat,
3 - Earthed Electrode - Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Electrode Gap [mm]: 0.7
- Length [mm]: 126
- Weight [kg]: 0.061
-
Spark Plug: 1 -
Earthed Electrode - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
External Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spanner Size: 21
- Electrode Gap [mm]: 0.8
-
Spark Plug: with gasket seat,
3 - Earthed Electrode - Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: DS
-
Spark Plug: 3 -
Earthed Electrode, with resistor - Electrode Gap [mm]: 0.9
- Thread Size: M14 x 1.25
- Thread Length [mm]: 19
-
Spanner Size: 20,
8 -
Technical Information: Nichel-
Chromium with internal in branch - Manufacturer: MAGNETI MARELLI
-
Name: MM SNA7025-
9
- Required quantity: 4
- Electrode Gap [mm]: 0.8
-
Connector type: M4/
SAE -
Thread Size: M14x1,
25 - Spanner Size: 21 mm
-
Spark Plug: 3 -
Earthed Electrode, with gasket seat - Thread Length [mm]: 19
-
Technical Information Number: 14-
7 DTU - Self-service suited packaging see parts list:
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Name: STEKNAL
- Manufacturer: BERU
- Engine Code: DS
- Required quantity: 4
- Catalytic Converter Type: for vehicles without catalytic convertor
- Connector type: Crimped SAE
- Diameter [mm]: 14
- Spanner Size: 20.6
- Tightening Torque [Nm]: 22
- Weight [g]: 58
- Country Specific Design: Japan
-
Spark Plug: 1 -
Earthed Electrode, Nickel Middle Electrode - Thread Length [mm]: 19
- Gross Weight [g]: 61
- Manufacturer: DENSO
- Name: DN W20TT
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Required quantity: 4
- Alternatively:
- Electrode Gap [mm]: 0.9
-
Connector type: M4/
SAE - Thread Size: M14x1.25
- Spanner Size: 21 mm
-
Quality/ Grade: Ti Poly-
V - Packing Type: Box
-
Spark Plug: 1 -
Earthed Electrode, with gasket seat - Thread Length [mm]: 19
- Technical Information Number: CET8
- Spark Position [mm]: 3
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8.85
- Packaging width [cm]: 2.6
- Packaging height [cm]: 2.35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1.5
- Name: CH CET8
- Manufacturer: CHAMPION
- Construction Year from: 06.1983
- Electrode Gap [mm]: 0.8
-
Spanner Size: 20,
8 mm -
Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spark Position [mm]: 5.2
- Name: STEKNAL
- Manufacturer: NGK
Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Construction Year from: 06.1983
- Electrode Gap [mm]: 0.8
-
Spanner Size: 20,
8 mm -
Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spark Position [mm]: 5.2
- Name: STEKNAL
- Manufacturer: NGK
Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Required quantity: 4
- Alternatively:
- Electrode Gap [mm]: 0.9
-
Connector type: M4/
SAE -
Thread Size: M14x1,
25 - Spanner Size: 21 mm
-
Quality/ Grade: Poly-
V Tit -
Spark Plug: 1 -
Earthed Electrode, with gasket seat - Thread Length [mm]: 19
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Name: STEKNAL
- Manufacturer: BERU
- Required quantity: 4
- Electrode Gap [mm]: 0.8
-
Connector type: M4/
SAE -
Thread Size: M14x1,
25 - Spanner Size: 21 mm
-
Spark Plug: 3 -
Earthed Electrode, with gasket seat - Thread Length [mm]: 19
-
Technical Information Number: 14 GH-
7 DTUR - Self-service suited packaging see parts list:
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Name: STEKNAL
- Manufacturer: BERU
- Required quantity: 4
- Electrode Gap [mm]: 1
-
Connector type: M4/
SAE - Thread Size: M14x1.25
- Spanner Size: 21 mm
- Quality/ Grade: Nickel GE
- Packing Type: Box
- Thread Length [mm]: 19
- Technical Information Number: RN8VTYC4
- Spark Position [mm]: 3
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8.85
- Packaging width [cm]: 2.6
- Packaging height [cm]: 2.35
- Resistor from [kOhm]: 1
- Resistor to [kOhm]: 2
- Projection [mm]: 1.4
-
Name: CH OE025/
T10 - Manufacturer: CHAMPION
Spark Plug: 3 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Engine Code: DS
- Required quantity: 4
- Catalytic Converter Type: for vehicles without catalytic convertor
-
Fuel Type: CNG/
LPG - Connector type: Solid SAE
- Diameter [mm]: 14
- Spanner Size: 20.6
- Tightening Torque [Nm]: 22
- Weight [g]: 58
- Country Specific Design: Japan
-
Spark Plug: 1 -
Earthed Electrode, Platinum Middle Electrode - Thread Length [mm]: 19
- Gross Weight [g]: 61
- Manufacturer: DENSO
- Name: DN IW20TT
- Quality class: Q
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Required quantity: 4
- Alternatively:
- Electrode Gap [mm]: 0.8
- Connector type: SAE
- Thread Size: M14x1.25
- Spanner Size: 21 mm
- Quality/ Grade: Pt GE
- Packing Type: Box
- Thread Length [mm]: 19
- Technical Information Number: RN8WYPB3
- Spark Position [mm]: 3
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 10
- Packaging width [cm]: 2.5
- Packaging height [cm]: 2.5
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1.5
- Name: CH CCH9804
- Manufacturer: CHAMPION
Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode
- Construction Year from: 06.1983
- Electrode Gap [mm]: 0.8
-
Spanner Size: 20,
8 mm -
Thread Size: M14 x 1,
25 -
Fuel Type: CNG/
LPG -
Recommended change interval [km]: 60,
000 - Name: STEKNAL
- Manufacturer: NGK
- Lisainfo: LPG2
- Additional information: LPG2
Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks