• Fitting Position: frontal sided
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Width [mm]: 10
• Material: FPM (fluoride rubber)
• Manufacturer: JP GROUP
• Lisainfo: Oil seal, 35x48x10 mm
• Additional information: Oil seal, 35x48x10 mm

• Vehicle Identification Number (VIN) from: 2D-1-016 678
• Fitting Position: frontal sided
• Outer Diameter [mm]: 47
• Inner Diameter [mm]: 32
• Width [mm]: 10
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Engine Code: AGX
• Engine Number to: 009000
• Fitting Position: transmission sided
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Width 1 [mm]: 9
• Width 2 [mm]: 11
• Housing Type: with housing
• Lisainfo: Seal flange for crankshaft
• Additional information: Seal flange for crankshaft

• Material: ACM (Polyacrylate)
• Fitting Position: frontal sided
• Thickness [mm]: 10
• Weight [kg]: 0.016
• Required quantity: 1
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• General Information: seal ring;35*48*10 mm
• Manufacturer: VIKA

• for OE number: 068 103 085 E
• Fitting Position: frontal sided
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Manufacturer: TRUCKTEC

• Fitting Position: Front
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Fabrication Number: NUP-VW-012
• Manufacturer: NTY

• Fitting Position: frontal sided
• Observe service information:
• Swirl Type: Right-hand Twist
• Material: PTFE (polytetrafluoroethylene)
• Dust Cover: with dust lip
• Fabrication Number: NUP-VW-011

• Fitting Position: frontal sided
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Manufacturer: DELLO AUTOMEGA
• Additional information: 190017010 DELLO
• Lisainfo: 190017010 DELLO

• Vehicle Identification Number (VIN) to: 2D1016677
• Fitting Position: frontal sided
• Material: FPM (fluoride rubber)
• Inner Diameter 1 [mm]: 32
• Outer Diameter 1 [mm]: 47
• Height 1 [mm]: 10
• Swirl Type: Alternating Twist
• Dust Cover: with dust lip
• for OE number: 026103085D
• Name: VOLLI RONGASTIHEND, NUKKVOLL
• Manufacturer: COT
• Additional information: 12012709
• Lisainfo: 12012709

• Required quantity: 1
• Fitting Position: frontal sided
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Required quantity: 2
• Fitting Position: frontal sided
• Engine Code: AGX
• Material: FPM (fluoride rubber)
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Radial Shaft Seal Design: A SL
• Swirl Type: Alternating Twist
• Name: VOLLI RONGASTIHEND, NUKKVOLL
• Manufacturer: REI
• Lisainfo: 81-19299-10
• Additional information: 81-19299-10

• Required quantity: 2
• Vehicle Identification Number (VIN) to: 2D-1-016 677
• Fitting Position: frontal sided, transmission sided
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Alternating Twist
• Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
• Dust Cover: with dust lip
• Alternative Repair Kit: 325.156
• Manufacturer: ELRING
• Lisainfo: 325.155 ELR
• Additional information: 325.155 ELR

• Engine Code: AGX
• Engine Number to: 009 000
• Fitting Position: frontal sided, transmission sided
• Height [mm]: 11
• Material: FPM (fluoride rubber)
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Swirl Type: Left-hand Twist
• Dust Cover: with dust lip
• Manufacturer: DELLO AUTOMEGA

• Required quantity: 2
• Vehicle Identification Number (VIN) to: 2D-1-016 677
• Fitting Position: transmission sided, frontal sided
• Thickness [mm]: 10
• for OE number: 068 103 085 E
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Weight [kg]: 0.023
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 2D-1-016678
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Fitting Position: Cylinder Head
• Material: PTFE (polytetrafluoroethylene)
• Dust Cover: with dust lip
• Swirl Type: Left-hand Twist
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front
• Vehicle Identification Number (VIN) from: 2D-1-016678
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Swirl Type: Alternating Twist, Right-hand Twist
• Material: PTFE (polytetrafluoroethylene)
• Dust Cover: with dust lip
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Fabrication Number: NUP-AU-003
• Manufacturer: NTY

• Required quantity: 2
• Vehicle Identification Number (VIN) to: 2D-1-016 677
• Fitting Position: frontal sided, transmission sided
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Alternating Twist
• Material: FPM (fluoride rubber)
• Dust Cover: with dust lip
• Alternative Repair Kit: 325.155
• Manufacturer: ELRING

• Fitting Position: frontal sided
• Engine Code: AGX
• Material: FPM (fluoride rubber)
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Radial Shaft Seal Design: A SL
• Swirl Type: Right-hand Twist
• Name: VOLLI RONGASTIHEND, VŽNTVOLL
• Manufacturer: REI

• Fitting Position: frontal sided
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Right-hand Twist
• Material: FPM (fluoride rubber)
• Dust Cover: with dust lip
• Manufacturer: ELRING

• Height [mm]: 10
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Fitting Position: frontal sided

• Fitting Position: frontal sided
• Height [mm]: 10
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48

• Fitting Position: Cylinder Head
• General Information: sealing flang; front
• Manufacturer: VIKA

• Fitting Position: frontal sided
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Right-hand Twist
• Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
• Dust Cover: with dust lip
• Manufacturer: ELRING

• Engine Number to: 009000
• Fitting Position: transmission sided
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Width [mm]: 11
• Name: Volli rongastihend, V„ntvoll
• Manufacturer: DRM

• Engine Code: AGX
• Fitting Position: frontal sided
• Weight [kg]: 0.035
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 2D1016678
• Fitting Position: frontal sided
• Inner Diameter 1 [mm]: 32
• Outer Diameter 1 [mm]: 47
• Height 1 [mm]: 10
• Material: PTFE (polytetrafluoroethylene)
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• for OE number: 038103085A
• Name: VOLLI RONGASTIHEND, NUKKVOLL
• Manufacturer: COT
• Additional information: 20026413
• Lisainfo: 20026413

• Fitting Position: frontal sided
• Vehicle Identification Number (VIN) from: 2D-1-016 678
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Observe mounting information:
• Manufacturer: ELRING
• Lisainfo: 129.780 ELR
• Additional information: 129.780 ELR

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease

• Vehicle Identification Number (VIN) from: 2D-1-016 678
• Fitting Position: frontal sided
• Height [mm]: 10
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Swirl Type: Right-hand Twist
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE

• Engine Number to: 009000
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Height [mm]: 11
• Dust Cover: with dust lip
• Swirl Type: Left-hand Twist
• Material: FPM (fluoride rubber)
• Fitting Position: transmission sided
• Alternative Repair Kit: 105 753
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: transmission sided
• Vehicle Identification Number (VIN) from: 2D-1-016 678
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Left-hand Twist
• Dust Cover: with dust lip
• Observe mounting information:
• Name: Volli rongastihend, Nukkvoll
• Manufacturer: ELR

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease

• Fitting Position: frontal sided
• General Information: shaft oil seal
• Manufacturer: BORSEHUNG

• Fitting Position: transmission sided
• Engine Number to: AGX 009 000
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Height [mm]: 11
• Radial Shaft Seal Design: ASW
• Swirl Type: Left-hand Twist
• Material: FPM (fluoride rubber)
• Dust Cover: with dust lip
• Alternative Repair Kit: 829.056
• Manufacturer: ELRING

• Fitting Position: frontal sided
• Engine Code: AGX
• Construction Year to: 04.2001
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Swirl Type: Right-hand Twist
• Name: VOLLI RONGASTIHEND, VŽNTVOLL
• Manufacturer: AJU

• Fitting Position: Axle beam
• General Information: shaft oil seal
• Manufacturer: BORSEHUNG

• Fitting Position: transmission sided
• Engine Number to: AGX 009 000
• Engine Code: AGX
• Material: FPM (fluoride rubber)
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Height [mm]: 11
• Radial Shaft Seal Design: A SL
• Swirl Type: Left-hand Twist
• Height 1 [mm]: 9
• Name: VOLLI RONGASTIHEND, VŽNTVOLL
• Manufacturer: REI
• Lisainfo: 81-23708-40
• Additional information: 81-23708-40

• Engine Number to: AGX 009 000
• Thickness [mm]: 11
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Fitting Position: transmission sided
• Weight [kg]: 0.103
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 2D-1-016 678
• Thickness [mm]: 10
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Rotation Direction: Clockwise rotation
• Material: ACM (Polyacrylate), PTFE (polytetrafluoroethylene)
• Supplementary Article/Info 2: with mounting sleeve
• Fitting Position: frontal sided
• Weight [kg]: 0.01
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: frontal sided
• Height [mm]: 10
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Swirl Type: Right-hand Twist
• Radial Shaft Seal Design: ASW
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE

• Required quantity: 2
• Engine Code: AGX
• Construction Year to: 04.2001
• Block Separation:
• Fitting Position: frontal sided
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Swirl Type: Alternating Twist
• Name: VOLLI RONGASTIHEND, NUKKVOLL
• Manufacturer: AJU

• Fitting Position: frontal sided
• Inner Diameter 1 [mm]: 35
• Outer Diameter 1 [mm]: 48
• Height 1 [mm]: 10
• Material: PTFE (polytetrafluoroethylene)
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Supplementary Article/Info 2: with mounting sleeves
• for OE number: 038103085
• Name: VOLLI RONGASTIHEND, VŽNTVOLL
• Manufacturer: COT
• Additional information: 20026412B COR
• Lisainfo: 20026412B COR

• Engine Number from: 9001
• Supplementary Article/Info 2: with flange
• Fitting Position: transmission sided
• Fabrication Number: NUP-VW-006
• Manufacturer: NTY

• Thickness [mm]: 10
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Fitting Position: frontal sided
• Weight [kg]: 0.01
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: transmission sided
• Vehicle Identification Number (VIN) from: 2D-1-016 678
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Radial Shaft Seal Design: ASW OF
• Swirl Type: Left-hand Twist
• Material: FPM (fluoride rubber)
• Dust Cover: with dust lip
• Manufacturer: ELRING

• Engine Code: AGX
• Engine Number to: 009000
• Fitting Position: transmission sided
• Supplementary Article/Info 2: with flange
• Outer Diameter [mm]: 111
• Inner Diameter [mm]: 85
• Height [mm]: 16
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: transmission sided
• Engine Number to: AGX 009 000
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Height [mm]: 11
• Radial Shaft Seal Design: ASW
• Swirl Type: Left-hand Twist
• Material: FPM (fluoride rubber)
• Dust Cover: with dust lip
• Supplementary Article/Info 2: with mounting sleeve
• Manufacturer: ELRING

• Engine Number from: 009 001
• Fitting Position: transmission sided
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Height [mm]: 11
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: transmission sided
• Housing Type: with housing
• Housing material: Cast Aluminium
• Alternative Repair Kit: 101 407
• Sealing lip material: PTFE (polytetrafluoroethylene)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: transmission sided, Rear
• Engine Number from: AGX009001
• Engine Code: AGX
• Supplementary Article/Info 2: with flange
• Name: VOLLI RONGASTIHEND, VŽNTVOLL
• Manufacturer: MAX

• Vehicle Identification Number (VIN) from: 2D1016678
• Inner Diameter 1 [mm]: 32
• Outer Diameter 1 [mm]: 47
• Height 1 [mm]: 10
• Dust Cover: with dust lip
• Swirl Type: Left-hand Twist
• Supplementary Article/Info 2: with mounting sleeves
• Fitting Position: Engine
• Manufacturer: CORTECO
• Name: CO 19037038

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)

• Fitting Position: transmission sided
• Inner Diameter [mm]: 85
• Weight [kg]: 0.265
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: transmission sided
• Height [mm]: 16
• Housing Type: with housing
• Outer Diameter 1 [mm]: 101
• Outer Diameter 2 [mm]: 155
• Inner Diameter 1 [mm]: 85
• Manufacturer: BGA

• for OE number: 03G 105 021 C
• Thickness [mm]: 10
• Inner Diameter [mm]: 35
• Fitting Position: frontal sided
• Outer Diameter [mm]: 48
• Weight [kg]: 0.031
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Number from: 009001
• Fitting Position: transmission sided
• Inner Diameter [mm]: 85
• Radial Shaft Seal Design: SP
• Housing Type: with housing
• Name: Volli rongastihend, V„ntvoll
• Manufacturer: DRM

• Fitting Position: transmission sided
• Supplementary Article/Info 2: with flange
• Weight [kg]: 0.17
• Required quantity: 1
• Inner Diameter [mm]: 85
• General Information: sealing flang; rear
• Manufacturer: VIKA

• Outer Diameter [mm]: 47
• Thickness [mm]: 10
• Inner Diameter [mm]: 32
• Fitting Position: transmission sided
• Weight [kg]: 0.195
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: transmission sided
• Inner Diameter 1 [mm]: 85
• Outer Diameter 1 [mm]: 131
• Outer Diameter 2 [mm]: 152
• Height 1 [mm]: 15.7
• Material: PTFE (polytetrafluoroethylene)
• Supplementary Article/Info 2: with mounting sleeves
• Swirl Type: Alternating Twist
• for OE number: 028103171B
• Name: VOLLI RONGASTIHEND, VŽNTVOLL
• Manufacturer: COT

• Fitting Position: transmission sided
• Supplementary Article/Info 2: with flange
• Weight [kg]: 0.17
• Required quantity: 1
• Inner Diameter [mm]: 85
• General Information: sealing flang; rear
• Manufacturer: VIKA

• Engine Number from: 009 001
• Inner Diameter [mm]: 85
• Fitting Position: transmission sided
• Weight [kg]: 0.17
• Supplementary Article/Info 2: with flange
• Manufacturer: FEBI BILSTEIN
• Additional information: FE37745
• Lisainfo: FE37745

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: transmission sided
• Engine Number from: AGX 009 001
• Engine Code: AGX
• Supplementary Article/Info 2: with carrier frame
• Name: VOLLI RONGASTIHEND, VŽNTVOLL
• Manufacturer: REI

• Fitting Position: transmission sided
• Engine Number from: AGX 009 001
• Inner Diameter [mm]: 85
• Radial Shaft Seal Design: SP
• Swirl Type: Left-hand Twist
• Housing Type: with housing
• Supplementary Article/Info 2: with mounting sleeve
• Manufacturer: ELRING
• Lisainfo: 804.850 ELR
• Additional information: 804.850 ELR

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease

• Fitting Position: transmission sided
• Engine Code: AGX
• Construction Year to: 04.2001
• Housing Type: with housing
• Height [mm]: 16.5
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 111
• Name: VOLLI RONGASTIHEND, VŽNTVOLL
• Manufacturer: AJU