• Catalytic Converter Type: for vehicles with catalytic converter
• Number of pins: 2
• Colour: blue
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Number of pins: 2
• Colour: white
• External Thread [mm]: M14x1.5
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 10/20/80 C
• Additional information: Temperature sensor for cooling system, 10/20/80 C

• Number of pins: 2
• Housing Colour: black
• Connector Shape: angular
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Number of pins: 2
• Colour: white
• External Thread [mm]: M10x1
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Switch-on point [°C]: 85
• Shut-off Point [°C]: 80
• Lisainfo: Thermo switch for fan 85-80 C
• Additional information: Thermo switch for fan 85-80 C

• Number of pins: 4
• Switch Point [°C]: 108, 112
• Colour Coding: brown
• Temperature range from [°C]: 108
• Temperature range to [°C]: 119
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Inner Diameter [mm]: 19.5
• Thickness [mm]: 3.5
• Material: Rubber
• for OE number: 7198663
• Manufacturer: DELLO AUTOMEGA

• Inner Diameter [mm]: 19.5
• Thickness [mm]: 3.5
• Weight [kg]: 0.001
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M10x1
• Colour: black
• Number of pins: 1
• Spanner Size: 14
• Length [mm]: 25
• Manufacturer: DELLO AUTOMEGA

• Length [mm]: 52
• Housing Colour: white
• Spanner Size: 19
• Manufacturer: KAMOKA

• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Lisainfo: Sender for oil temperature
• Additional information: Sender for oil temperature

• Catalytic Converter Type: for vehicles with catalytic converter
• Number of pins: 2
• Colour: blue
• Diameter [mm]: 20
• Manufacturer: DELLO AUTOMEGA

• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Number of pins: 2
• Colour Coding: black/green
• Manufacturer: TOPRAN HANS PRIES
• Lisainfo: 103 327 HP
• Additional information: 103 327 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Temperature range from [°C]: 55
• Temperature range to [°C]: 65
• Colour Coding: red
• Manufacturer: JP GROUP
• Lisainfo: Thermo switch for cooling system, 55-65 C
• Additional information: Thermo switch for cooling system, 55-65 C

• Housing Colour: white
• Spanner Size: 19
• for OE number: 26906161
• Manufacturer: KAMOKA

• Number of pins: 2
• Switch Point [°C]: 119
• Manufacturer: JP GROUP
• Lisainfo: Thermo switch for air condition 119 C
• Additional information: Thermo switch for air condition 119 C

• Thread Size: M14x1,5
• Spanner Size: 19
• Length [mm]: 52
• Number of pins: 2
• Colour: blue
• Colour Coding: white
• Manufacturer: DELLO AUTOMEGA

• Housing Colour: blue
• for OE number: 025906041A
• Manufacturer: KAMOKA

• for OE number: 251919501A
• Manufacturer: KAMOKA

• Thread Size: M10x1,0
• Colour: black
• Number of connectors: 1
• Weight [kg]: 0.019
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Housing Colour: red
• Manufacturer: KAMOKA

• Housing Colour: white
• for OE number: 191 919 369 A S1
• Manufacturer: KAMOKA

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: round
• Number of pins: 1
• Spanner Size: 14
• Thread Size: M10x1
• for OE number: 027919501
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Length [mm]: 25
• Temperature range to [°C]: 125
• External Thread Size: M10 x 1
• Thread Length [mm]: 10.9
• Spanner Size: 14
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.012
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 191919369A
• Manufacturer: KAMOKA

• Connector Shape: rectangular
• Number of pins: 2
• Fitted Diameter [mm]: 20
• Temperature range from [°C]: 55
• Temperature range to [°C]: 65
• Colour Coding: red
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Temperature range to [°C]: 125
• Length [mm]: 25
• External Thread Size: M10 x 1
• Thread Length [mm]: 10.9
• Spanner Size: 14
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.012
• Supplementary Article/Info 2: with seal ring
• Name: SW 99 90 1939
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 004 153 2528
• Thread Size: M14 x 1,5
• Number of connectors: 2
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Plug Type: Blade Terminal
• Thread Size: M 10 x 1,0
• Number of pins: 1
• Switch Point [°C]: 100
• Supplementary Article/Info 2: with seal ring
• Colour Coding: yellow
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Connector Shape: round
• Number of pins: 2
• Fitted Diameter [mm]: 20
• Temperature range from [°C]: 55
• Temperature range to [°C]: 65
• Colour Coding: blue
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Equipment: for vehicles with air conditioning
• Switch-on point [°C]: 95
• Shut-off Point [°C]: 84
• Number of pins: 2
• Thread Size: M22X1,5
• Connector Shape: angular
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 2
• Switch Point [°C]: 55, 65
• Supplementary Article/Info 2: with seal ring
• Housing Colour: brown
• Switch point from [°C]: 65
• Switch point to [°C]: 55
• Weight [kg]: 0.027
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 1V
• Number of pins: 1
• Colour: black
• Thread Size: M10x1
• Spanner Size: 13
• Name: EP 1.830.073
• Manufacturer: EPS

• Construction Year from: 02.1990
• Thread Size: M10x1.0
• Manufacturer: VERNET

• Number of connectors: 2
• Colour Coding: green
• Weight [kg]: 0.02
• Manufacturer: SWAG
• Name: SW 30 91 8666

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: ERA

• Number of pins: 3
• Spanner Size: 29
• Thread Size: M 22 x 1,5
• Connector Shape: angular
• Housing Colour: black
• Supplementary Article/Info 2: with seal ring
• Switch-on point [°C]: 95, 102
• Shut-off Point [°C]: 84, 91
• Number of switch stages: 2
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 3
• Spanner Size: 29
• Thread Size: M 22 x 1,5
• Connector Shape: angular
• Housing Colour: black
• Supplementary Article/Info 2: with seal ring
• Switch-on point [°C]: 85, 93
• Shut-off Point [°C]: 80, 88
• Number of switch stages: 2
• Manufacturer: DELLO AUTOMEGA

• Thread Size: M 22 x 1,5
• Spanner Size: 29
• Number of pins: 2
• Plug Type: Blade Terminal
• Shut-off Point [°C]: 70
• Switch-on point [°C]: 75
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of connectors: 2
• Colour Coding: green
• Weight [kg]: 0.02
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Diameter [mm]: 26
• Length [mm]: 35
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• for OE number: 251 919 501 D
• Housing Colour: black
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Spanner Size: 29
• for OE number: 191959481
• Manufacturer: KAMOKA

• Catalytic Converter Type: for vehicles with catalytic converter
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Opening Temperature [°C]: 120
• Number of pins: 2
• Colour: white
• Spanner Size: 20 mm
• Weight [kg]: 0.02
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M 22 x 1,5
• Number of pins: 2
• Switch-on point [°C]: 80
• Shut-off Point [°C]: 75
• Plug Type: Blade Terminal
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Colour: black
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thread Size: M 22 x 1,5
• Spanner Size: 29
• Plug Type: Blade Terminal
• Number of pins: 2
• Switch-on point [°C]: 85
• Shut-off Point [°C]: 80
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Colour: grey
• Spanner Size: 29
• for OE number: A0015403045
• Manufacturer: KAMOKA

• Thread Size: M 22 x 1,5
• Number of pins: 2
• Switch-on point [°C]: 95
• Shut-off Point [°C]: 90
• Plug Type: Blade Terminal
• Spanner Size: 29
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• for OE number: 251919501A
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Number of pins: 2
• Switch Point [°C]: 55, 65
• Colour: red
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Temperature range to [°C]: 125
• External Thread [mm]: M10 x 1
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Diameter [mm]: 20
• Number of pins: 2
• Manufacturer: ERA

• Colour: black
• Number of pins: 1
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Catalytic Converter Type: for vehicles with catalytic converter
• Number of connectors: 2
• Colour: blue
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with retaining spring, with seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Switch-on point [°C]: 95, 102
• Shut-off Point [°C]: 84, 91
• Lisainfo: Thermo switch for fan 95-84 C/102-91 C, 3 pins
• Additional information: Thermo switch for fan 95-84 C/102-91 C, 3 pins

• Temperature range from [°C]: 108
• Temperature range to [°C]: 119
• Connector Shape: rectangular
• Number of pins: 4
• Fitted Diameter [mm]: 20
• Switch Point [°C]: 108, 112
• Colour Coding: brown
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Catalytic Converter Type: for vehicles with catalytic converter
• Number of connectors: 2
• Colour: blue
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Name: SW 30 93 4762
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Connector Shape: rectangular
• Material: Brass
• Number of pins: 2
• Plug Type: Male
• Sensor Type: NTC Sensor
• Spanner Size: 20 mm
• Thread Size: not have

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Thread Size: 20 mm
• Manufacturer: VERNET

• Operating temperature from [°C]: 94
• Operating temperature to [°C]: 84
• Thread Size: M22x1.5
• Sensor Type: Open-style sensor
• Manufacturer: CALORSTAT BY VERNET

• External Thread Size: M22 x 1,5
• Spanner Size: 29
• Number of connectors: 2
• Colour Coding: black
• Temperature range from [°C]: 90
• Temperature range to [°C]: 95
• Weight [kg]: 0.061
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 1V
• Vehicle Equipment: for vehicles with air conditioning
• Operating temperature from [°C]: 112
• Operating temperature to [°C]: 120
• Thread Size: 20 mm
• Manufacturer: CALORSTAT BY VERNET

• Catalytic Converter Type: for vehicles with catalytic converter
• Length [mm]: 37
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• for OE number: 025 906 041 A
• Supplementary Article/Supplementary Info: with seal
• Colour Coding: blue
• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M10x1,0
• Colour: white
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Weight [kg]: 0.029
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Connector Shape: angular
• Thread Size: M 22 x 1,5
• Number of pins: 3
• Spanner Size: 29
• Switch-on point [°C]: 85, 93
• Shut-off Point [°C]: 80, 88
• Number of switch stages: 2
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Connector Shape: angular
• Thread Size: M 22 x 1,5
• Number of pins: 3
• Number of switch stages: 2
• Switch-on point [°C]: 95, 102
• Shut-off Point [°C]: 85, 92
• Spanner Size: 29
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Catalytic Converter Type: for vehicles with catalytic converter
• Thread Size: M20
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

• Thread Size: M 22 x 1,5
• Shut-off Point [°C]: 84
• Switch-on point [°C]: 95
• Number of pins: 2
• Connector Shape: angular
• Spanner Size: 29
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Plug Type: Blade Terminal
• Socket colour: white
• Connector Shape: oval
• Shut-off Point [°C]: 95
• Switch Point [°C]: 90
• Thread Size: M22x1,5 mm
• Spanner Size: 29 mm
• for OE number: 191 959 481
• Manufacturer: MEAT&DORIA

• for OE number: 191 959 481 C
• Switch point from [°C]: 102
• Switch point to [°C]: 85
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Thread Size: M 22 x 1,5
• Number of pins: 3
• Connector Shape: angular
• Switch-on point [°C]: 95, 102
• Shut-off Point [°C]: 84, 91
• Spanner Size: 29
• Number of switch stages: 2
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Housing Colour: white
• Number of pins: 2
• Thread Size: M10X1-6g
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10251

• Engine Code: 1V
• Number of pins: 2
• Colour: black
• Manufacturer: EPS

• General Information: temperature switch
• Manufacturer: BORSEHUNG

• External Thread Size: M10 x 1
• Number of connectors: 2
• Colour: white
• Weight [kg]: 0.025
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Connector Shape: oval
• Socket colour: black
• Shut-off Point [°C]: 95, 92
• Switch Point [°C]: 85, 102
• Thread Size: M22x1,5 mm
• Spanner Size: 29 mm
• for OE number: 191 959 481 A
• Manufacturer: MEAT&DORIA

• Length [mm]: 52
• External Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: white
• Material: Brass, Plastic
• Screw length below head [mm]: 28
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Thread Size: M22x1.5
• Number of pins: 4
• Switch point from [°C]: 120
• Switch point to [°C]: 112
• Manufacturer: ERA

• Thread Size: M22 x 1,5
• Colour: white
• Switch: for double thermal switch
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Switch point from [°C]: 102
• Switch point to [°C]: 85
• Weight [kg]: 0.077
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Operating temperature from [°C]: 95, 102
• Operating temperature to [°C]: 84, 91
• Thread Size: M22x1.5
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Plug Type ID: 4 polig
• Thread Size: M20x1,5
• General Information: temperature sensor
• Manufacturer: VIKA

• Outer Diameter [mm]: 20
• Number of connectors: 2
• Colour: white
• Switch Point [°C]: 119
• Weight [kg]: 0.045
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 20
• Number of connectors: 2
• Colour: white
• Switch Point [°C]: 119
• Weight [kg]: 0.045
• Supplementary Article/Supplementary Info: with retaining spring, with seal
• Manufacturer: SWAG
• Name: SW 30 93 3888

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Switch Point [°C]: 84
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• External Thread Size: M22 x 1,5
• Spanner Size: 29
• Number of connectors: 3
• Colour Coding: grey
• Temperature range from [°C]: 95, 102
• Temperature range to [°C]: 84, 92
• Weight [kg]: 0.061
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M22 x 1,5
• Spanner Size: 29
• Number of pins: 2
• Switch point from [°C]: 95
• Switch point to [°C]: 84
• Manufacturer: ERA