Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle,
Lower - Required quantity: 2
- Control/Trailing Arm Type: Control Arm
-
Lisainfo: SEAT,
VOLKSWAGEN -
Additional information: SEAT,
VOLKSWAGEN
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Lower,
Front Axle Left, Front Axle Right - Material: Aluminium
- Thickness [mm]: 41
- Inner Diameter [mm]: 17
-
Outer Diameter [mm]: 60,
27 -
Name: Control arm bush -
kit left=right - Quality class: PJ
Lisainfo: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
- Supplementary Article/Info 2: with mounting sleeves
-
Fitting Position: Front Axle,
both sides, Rear - Quantity per axle: 2
- Control/Trailing Arm Type: for control arm
-
Name: Puks -
Kndmik VW P. GOLF/ PAS - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Control/Trailing Arm Type: Control Arm
- Fitting Position: Front Axle
- Weight [kg]: 0.36
- for OE number: N 904 840 03 S1
-
Name: MONTAA?IKOMPLEKT,
ROOLISSTEEM - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control/Trailing Arm Type: Control Arm
- Fitting Position: Front Axle
- Weight [kg]: 0.69
- for OE number: N 904 840 03 S2
-
Name: MONTAA?IKOMPLEKT,
ROOLISSTEEM - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- new version:
- Control/Trailing Arm Type: Control Arm
-
Supplementary Article/Info 2: without ball joint,
with coupling rod -
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.739
- for OE number: 191 407 153 S2
-
Name: Kinnitus -
Kndmik VW P. GOLF/ JETTA - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- new version:
- Cone Size [mm]: 17
- Control/Trailing Arm Type: Control Arm
-
Supplementary Article/Info 2: with ball joint,
with coupling rod -
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.111
- for OE number: 191 407 153 S4
-
Name: Montaa§ikomplekt,
roolissteem - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Right,
Front Axle Left - Material: Sheet Steel
- Consult accessories list for recommended additional repairs:
- Control/Trailing Arm Design: Triangular Control Arm
- Supplementary Article/Info 2: without ball joint
-
Supplementary Article/Supplementary Info: with rubber-
metal mounts -
Surface: Cathodic Painting,
Black- painted - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle Left,
Front Axle Right, Lower - Control/Trailing Arm Type: Control Arm
-
Manufacturer: JP-
GROUP -
Lisainfo: Wishbone,
front -
Additional information: Wishbone,
front
-
Fitting Position: Front Axle,
Lower, both sides - Control/Trailing Arm Type: Control Arm
-
Supplementary Article/Info 2: without ball joint,
with rubber mount -
only in connection with: 72-
0405 - Material: Sheet Steel
-
Name: Roolimine -
Kndmik VW P. GOLF/ JETTA II - Manufacturer: MAX
- Control/Trailing Arm Type: Control Arm
- Base body material: Steel
- Fitting Position: Front Axle
-
Net weight [kg]: 2,
498 - Diameter 1 [mm]: 17
- Diameter 2 [mm]: 12
- Supplementary Article/Info 2: without ball joint
-
Name: OMG G40.3638/
S - Manufacturer: OMG
-
Fitting Position: Front Axle Right,
Lower - Control/Trailing Arm Type: Control Arm
- Manufacturer: DELLO AUTOMEGA
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle both sides,
Lower - Manufacturer: DENCKERMANN FILTRY
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Lower,
Front Axle Left, Front Axle Right - Material: Sheet Steel
- Name: Control arm left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
IBIZA/TOL/COR/GOLF
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
IBIZA/TOL/COR/GOLF
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle,
outer, Lower - Control/Trailing Arm Type: Control Arm
- Net weight [kg]: 2.7
-
Name: Ootshoob,
kndmik - Manufacturer: NK
- old version:
- Control/Trailing Arm Type: Control Arm
-
Supplementary Article/Info 2: without ball joint,
with coupling rod -
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.738
- for OE number: 191 407 153 S1
-
Name: Montaa§ikomplekt,
roolissteem - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Lower,
Front Axle -
Article number of the recommended special tool: V99-
1020 - Supplementary Article/Info 2: with bearing
- Axle alignment required after fitting:
- Weight [kg]: 1.98
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Left,
Lower, Front Axle Right - Weight [kg]: 2.456
- Supplementary Article/Info 2: with bearing
-
Name: Roolimine -
Kndmik VW P. GOLF/ JETTA II - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Lower - Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with ball joint
- Joint Diameter [mm]: 19
- Manufacturer: JP GROUP
- Lisainfo: Track Control Arm
- Additional information: Track Control Arm
-
Fitting Position: Front Axle Right,
Lower - Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with ball joint
- Joint Diameter [mm]: 19
- Manufacturer: JP GROUP
- Lisainfo: Track Control Arm
- Additional information: Track Control Arm
-
Fitting Position: Front Axle Left,
Lower, Front Axle Right - Control/Trailing Arm Type: Control Arm
- Manufacturer: GSP
-
Fitting Position: Lower,
Front Axle Left, Front Axle Right - Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with rubber mount
- Material: Sheet Steel
- replacement in pairs recommended:
- Required quantity: 2
- Manufacturer: MEY
Name: Roolimine - Kndmik VW P. GOLF/JETTA II LE/PR Z TULEJAMI BEZ SWORZNIA
- Vehicle Identification Number (VIN) to: 6NY500000
-
Fitting Position: Front Axle Right,
Lower Front Axle - Control/Trailing Arm Type: Control Arm
- Length [mm]: 276
- Inner Diameter 1 [mm]: 12.2
- paired article number: TRC9608
- Supplementary Article/Info 2: with ball joint
- Manufacturer: BGA
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Lower Front Axle,
Lower, both sides
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Left,
Lower, Front Axle Right - Weight [kg]: 2.456
- Supplementary Article/Info 2: with bearing
- Name: SW 30 73 0013
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: 19-
JW- 000- 001 -
Fitting Position: Front Axle Left,
Lower Front Axle - Control/Trailing Arm Type: Control Arm
- Length [mm]: 276
- Inner Diameter 1 [mm]: 12.2
- paired article number: TRC9609
- Supplementary Article/Info 2: with ball joint
- Manufacturer: BGA
-
Fitting Position: Front Axle Left,
Lower - Thread Size 1: Pinch Bolt 19mm
- Material: Sheet Steel
- paired article number: TC765
- Control/Trailing Arm Type: Trailing Arm
- Supplementary Article/Info 2: with ball joint
- Length [mm]: 428
- Width [mm]: 68
- Name: DE TC764
- Manufacturer: DELPHI
-
Fitting Position: Front Axle Right,
Lower - Thread Size 1: Pinch Bolt 19mm
- Material: Sheet Steel
- paired article number: TC764
- Control/Trailing Arm Type: Trailing Arm
- Supplementary Article/Info 2: with ball joint
- Length [mm]: 428
- Width [mm]: 68
- Name: DE TC765
- Manufacturer: DELPHI
- Control/Trailing Arm Type: Control Arm
- Quantity Unit: Set
-
Fitting Position: Lower,
Front Axle Right - Cone Size [mm]: 19
- Material: Sheet Steel
- Rod/Strut: Push Rod
- Quality class: PJ
- Name: Control arm right
Lisainfo: "Tootja: SRL
SEAT IBIZA/CORDOBA
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
SEAT IBIZA/CORDOBA
(kvaliteediklass: PJ)"
- Control/Trailing Arm Type: Control Arm
- Quantity Unit: Set
-
Fitting Position: Lower,
Front Axle Left - Cone Size [mm]: 19
- Material: Sheet Steel
- Rod/Strut: Push Rod
- Quality class: PJ
- Name: Control arm left
- paired article number: 30 93 7186
- new version:
- Cone Size [mm]: 19
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Right,
Lower - Weight [kg]: 3.134
- Supplementary Article/Info 2: with bearing
- Name: SW 30 93 7306
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
Lower, both sides - Control/Trailing Arm Type: Control Arm
-
Supplementary Article/Info 2: without ball joint,
with rubber mount -
only in connection with: 31317 02,
31335 01 - Material: Sheet Steel
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle both sides,
Lower - Required quantity: 2
- Control/Trailing Arm Design: Triangular Control Arm
- paired article number: VKDS 321000
- Hole Pitch 1/ Hole Pitch 2: 274
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: without ball joint
- Name: SK VKDS321000
- Manufacturer: SKF
-
Fitting Position: Front Axle Right,
Front Axle Left - Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with ball joint
- Name: COC 49399019
- Manufacturer: CORTECO