Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: frontal sided
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Width [mm]: 10
- Manufacturer: JP GROUP
-
Lisainfo: Oil seal,
35x48x10 -
Additional information: Oil seal,
35x48x10
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)
- Fitting Position: frontal sided
- Weight [kg]: 0.016
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
-
Material: ACM
(Polyacrylate) - Required quantity: 1
- Thickness [mm]: 10
- General Information: seal ring;35*48*10 mm
- Manufacturer: VIKA
- Fitting Position: frontal sided
- General Information: seal ring
- Manufacturer: VIKA
- Fitting Position: frontal sided
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist - Radial Shaft Seal Design: ASW
- Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
- Name: DRM 01969
- Fitting Position: frontal sided
- Height 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Inner Diameter 1 [mm]: 32
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 03L103085
-
Swirl Type: Right-
hand Twist -
Version: PTFE POP/
ACM -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: COT
- Lisainfo: 20036702B CORTECO
- Additional information: 20036702B CORTECO
- Fitting Position: frontal sided
- General Information: shaft oil seal
- Manufacturer: BORSEHUNG
- Fitting Position: frontal sided
- Height [mm]: 10
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Manufacturer: BGA
Material: NBR (nitrile butadiene rubber), PTFE (polytetrafluoroethylene)
- Engine Code: CAYE
- Fitting Position: frontal sided
- for OE number: 034115147A
- Height [mm]: 10
-
Material: PTFE
(polytetrafluoroethylene) - Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Manufacturer: FAI
- Fitting Position: Front
- Height [mm]: 10
- Inner Diameter [mm]: 47
- Outer Diameter [mm]: 32
- Manufacturer: BGA USZCZELKI
Material: NBR (nitrile butadiene rubber), PTFE (polytetrafluoroethylene)
- Fitting Position: frontal sided
- Engine Code: CAYE
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: A
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: REI
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: AW
-
Swirl Type: Right-
hand Twist - Dust Cover: without dust lip
- Observe mounting information:
- Manufacturer: ELRING
- Additional information: 897.690 ELRING
- Lisainfo: 897.690 ELRING
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
- Fitting Position: frontal sided
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
- Supplementary Article/Info 2: with mounting sleeve
- Observe mounting information:
- Manufacturer: ELRING
- Lisainfo: 155.560 ELR
- Additional information: 155.560 ELR
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
- Fitting Position: frontal sided
- Engine Code: CAYE
-
Material: PTFE
(polytetrafluoroethylene), ACM (Polyacrylate) - Supplementary Article/Info 2: with mounting sleeve
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
- Radial Shaft Seal Design: A SL
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: REI
-
Fitting Position: frontal sided,
Cylinder Head - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: frontal sided
- Engine Code: CAYE
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: AJU
- Engine Code: CAYE
- Fitting Position: transmission sided
- for OE number: 03L103171A
-
Material: PTFE
(polytetrafluoroethylene) - Manufacturer: FAI
- Name: FAI OS1662
- Engine Code: CAYE
- Fitting Position: transmission sided
-
Material: PTFE
(polytetrafluoroethylene) - Supplementary Article/Info 2: with flange
- Inner Diameter [mm]: 85
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: MAX
- Engine Code: CAYE
- Block Separation:
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: AJU
- Fitting Position: transmission sided
- Weight [kg]: 0.23
- Inner Diameter [mm]: 85
-
Outer Diameter [mm]: 131,
152 -
Material: ACM
(Polyacrylate), PTFE (polytetrafluoroethylene) - Required quantity: 1
- Supplementary Article/Info 2: with flange
- Thickness [mm]: 17.3
- General Information: seal ring
- Manufacturer: VIKA
- Fitting Position: transmission sided
- Inner Diameter [mm]: 85
-
Swirl Type: Left-
hand Twist - Housing Type: with housing
-
Name: Volli rongastihend,
Vntvoll - Manufacturer: DRM
- Fitting Position: transmission sided
- Height [mm]: 16.5
- Inner Diameter [mm]: 130
- Outer Diameter [mm]: 165
- Housing Type: with housing
- Manufacturer: BGA
- Fitting Position: transmission sided
- Observe mounting information:
- Inner Diameter [mm]: 85
- Radial Shaft Seal Design: IWD
-
Swirl Type: Left-
hand Twist - Housing Type: with housing
- Article number of the recommended special tool: VW T10134
- Manufacturer: ELRING
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
- Fitting Position: transmission sided
- Engine Code: CAYE
-
Material: PTFE
(polytetrafluoroethylene) - Supplementary Article/Info 2: with flange
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: REI
- Fitting Position: transmission sided
- Engine Code: CAYE
- Inner Diameter [mm]: 130
- Outer Diameter [mm]: 165
- Height [mm]: 16.5
-
Swirl Type: Left-
hand Twist -
Material: PTFE
(polytetrafluoroethylene) - Housing Type: with housing
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: AJU
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks