Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Front Axle
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 74
- Height [mm]: 39.9
-
Lisainfo: Wheel bearing kit,
for one front wheel -
Additional information: Wheel bearing kit,
for one front wheel
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Supplementary Article/Info 2: with integrated wheel bearing
- Rim Hole Number: 5
-
Lisainfo: Wheel hub with bearing,
rear -
Additional information: Wheel hub with bearing,
rear
- Fitting Position: Rear Axle
- Number of Teeth, ABS ring: 43
- Inner Diameter [mm]: 61
- Outer Diameter [mm]: 79.5
-
Supplementary Article/Info 2: for wheel bearing/
wheel hub - Width [mm]: 21
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Identification Number (VIN): [;6H-
X- 027500], [;6K- X- 290 000], [;6NXY379991] -
Fitting Position: Right,
Left, Rear Axle - Inner Diameter 1 [mm]: 17
- Outer Diameter 2 [mm]: 50
- Outer Diameter 1 [mm]: 39
- Width 1 [mm]: 13
- Width 2 [mm]: 14
- Manufacturer: SNR
- Name: SN R154.13
- Välisläbimõõt [mm]: 74
- Piirangutega toode/piirangu info 2: ilma rattakeskmeta
-
Installatsiooni pool: Esisild,
esisild vasakul, esisild paremal -
Seerianumber: KLP-
VW- 009 - Manufacturer: NTY
-
Name: NTY KLP-
VW- 009
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Installatsiooni pool: Tagasild
- Garantii: 4 aastat garantii
- Kaal (kg): 1
- Aukude arv: 4
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Fitting Position: Front Axle
- Laius (mm): 40
- Siseläbimõõt [mm]: 40
- Välisläbimõõt [mm]: 74
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Fitting Position: Front Axle
- Laius (mm): 40
- Siseläbimõõt [mm]: 40
- Välisläbimõõt [mm]: 74
- Quality class: PJ
- Name: Wheel bearing kit
-
Fitting Position: Front Axle Left,
Front Axle Right - Version: Two
- Width 1 [mm]: 40
- Outer Diameter 1 [mm]: 74
- Inner Diameter 1 [mm]: 40
- Manufacturer: GSP
-
Seerianumber: KLP-
MZ- 012 -
Veljesuurus (toll): 18,
0 - Manufacturer: NTY
Installatsiooni pool: Tagasild, esisild vasakul, esisild paremal, Esisild
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle both sides
- Installatsiooni pool: Esisild
- Laius (mm): 40
- Siseläbimõõt [mm]: 40
- Välisläbimõõt [mm]: 74
- Manufacturer: JPN
-
Fitting Position: Front Axle Left,
Front Axle Right - Version: One
- Width 1 [mm]: 40
- Outer Diameter 1 [mm]: 74
- Inner Diameter 1 [mm]: 40
- Manufacturer: GSP
- Fitting Position: Front Axle
- Width [mm]: 40
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 74
- Bearing Type: Angular Ball Bearing
- Weight [kg]: 0.768
- Supplementary Article/Supplementary Info: with axle nut
- Supplementary Article/Info 2: with retaining ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Width [mm]: 40
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 74
- Bearing Type: Angular Ball Bearing
- Weight [kg]: 0.768
- Supplementary Article/Info 2: with retaining ring
- Supplementary Article/Supplementary Info: with axle nut
- Name: SW 30 91 4250
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Piirangutega toode/piirangu info 2: koos rattakeskmega
-
Installatsiooni pool: Tagasild,
Tagasild vasakul, Tagasild paremal -
Seerianumber: KLT-
VW- 004 - Manufacturer: NTY
-
Name: NTY KLT-
VW- 004
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
- Required quantity: 2
- Weight [kg]: 0.79
- Packaging length [cm]: 11
- Packaging width [cm]: 9
- Packaging height [cm]: 9
- Outer Diameter [mm]: 74
- Inner Diameter [mm]: 40
- Width [mm]: 40
-
Manufacturer: CONTITECH-
LOÅ»YSKA KÃÅ
-
Installatsiooni pool: Esisild,
Tagasild - Garantii: 4 aastat garantii
-
Kaal (kg): 1,
52 - Ava Ø 1 (mm): 100
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 29SKV439
- Fitting Position: Front Axle
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 74
- Width [mm]: 40
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 713610020
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 120
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
- Installatsiooni pool: ees
- Üldine informatsioon: wheel bearing with assembly parts; front
- Manufacturer: VIKA
- Installatsiooni pool: Esisild
- Hulk telje kohta: 2
- Siseläbimõõt [mm]: 40
- Välisläbimõõt [mm]: 74
- Laius (mm): 40
- Üldine informatsioon: wheel bearing; front
- Manufacturer: VIKA
- Fitting Position: Rear Axle
- Ääriku läbimõõt [mm]: 120
-
Piirangutega toode/piirangu info 2: koos ABS-
andurirõngaga - Veljeaukude hulk: 5
- Manufacturer: DENCKERMANN PIASTY LOZYSKA KOL
- Installatsiooni pool: Tagasild
- Siseläbimõõt [mm]: 30
- Välisläbimõõt [mm]: 120
-
Piduri-/sõidudünaamika: Sõidukitele koos ABS-
ga - Garantii: 4 aastat garantii
-
Kaal (kg): 1,
75 - Aukude arv: 5
- Ava Ø 1 (mm): 100
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 29SKV001
- Manufacturer: ESEN SKV
- Rotation angle [°]: 60
-
Tightening Torque [Nm]: 60,
200 -
Fitting Position: Front Axle Right,
Front Axle Left - Manufacturer: SNR
- Name: SN R157.22
-
Fitting Position: Right,
Front Axle - Width 1 [mm]: 37
- Inner Diameter 1 [mm]: 40
- Outer Diameter 1 [mm]: 72
- Tightening Torque [Nm]: 265
- Manufacturer: SNR
- Name: SN R154.28
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Version: One
-
Thread Size: M14X1,
5 - Number of Teeth, ABS ring: 43
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Rim Hole Number: 5
- Supplementary Article/Info 2: with ABS sensor ring
- Inner Diameter 2 [mm]: 29.98
- Manufacturer: GSP
- Model Year to: 2001
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.662
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 74
- Supplementary Article/Info 2: without wheel hub
- Packaging length [cm]: 7.4
- Packaging width [cm]: 7.4
- Packaging height [cm]: 4
- Manufacturer: FEBEST
- Model Year to: 2001
- Fitting Position: Front Axle
- Weight [kg]: 0.927
- Outer Diameter [mm]: 74
- Supplementary Article/Info 2: without wheel hub
- Packaging length [cm]: 8.5
- Packaging width [cm]: 7.4
- Packaging height [cm]: 7.4
- Manufacturer: FEBEST
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Thread Size: M14X1,
5 - Number of Teeth, ABS ring: 43
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Rim Hole Number: 5
- Supplementary Article/Info 2: with ABS sensor ring
- Inner Diameter 2 [mm]: 29.98
- Manufacturer: GSP
- Fitting Position: Front Axle
- Required quantity: 2
- Width [mm]: 40
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 74
- Manufacturer: SKF
- Name: SK VKBA3455
- Installatsiooni pool: ees
- Üldine informatsioon: wheel bearing; front
- Manufacturer: BORSEHUNG
- Fitting Position: Front Axle
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Inner Diameter [mm]: 40
- Outer Diameter [mm]: 74
- Height [mm]: 39.9
- Bearing Type: Ball Bearing
- Manufacturer: MEYLE
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
- Installatsiooni pool: Tagasild
- Aukude arv: 5
- Kaal (kg): 2
- vajaminev tükihulk: 2
- Ava Ø (mm): 100
- Laius (mm): 63
- Siseläbimõõt [mm]: 30
- Välisläbimõõt [mm]: 120
- Laagriteostus: Rulllaager
- Üldine informatsioon: wheel hub with bearing; rear
- Manufacturer: VIKA
- Width [mm]: 63
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 5
- Bearing Type: Rolling Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 2
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Manufacturer: FEBI BILSTEIN
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width [mm]: 63
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 5
- Bearing Type: Rolling Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 1.506
- Manufacturer: FEBI BILSTEIN
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width [mm]: 63
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 5
- Bearing Type: Rolling Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 2
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Name: SW 32 92 4236
- Manufacturer: SWAG
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Vehicle configuration line / variant: REAR LR+RE LR+RE
- for OE number: 1J0598477
- Diameter [mm]: 120
- Inner Diameter [mm]: 30
- Width 1 [mm]: 5
- Supplementary Article/Info 2: with integrated ABS sensor
- Number of mounting bores: 1
- Manufacturer: DAYCO ZESTAWY LOZYSK KOL
- Rim Hole Number: 5
- Inner Diameter [mm]: 30
- Number of Holes: 5
-
Supplementary Article/Info 2: with ABS sensor ring,
with wheel hub - Fitting Position: Rear Axle
- Width [mm]: 61.8
- Bolt Hole Circle Ø [mm]: 100
- Outer Diameter [mm]: 120
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Veljeaukude hulk: 5
- Ääriku läbimõõt [mm]: 120
-
Piirangutega toode/piirangu info 2: koos ABS-
andurirõngaga - Quality class: PJ
- Name: Wheel hub
- Installatsiooni pool: vasakul
- Üldine informatsioon: repair kit for wheel bearing
- Manufacturer: BORSEHUNG
- Width [mm]: 63
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 5
- Bearing Type: Rolling Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 1.506
- Name: SW 99 90 9521
- Manufacturer: SWAG
- Lisainfo: 99 90 9521 SWA
- Additional information: 99 90 9521 SWA
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Width [mm]: 61.8
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Manufacturer: OPTIMAL
-
Piirangutega toode/piirangu info 2: koos ABS-
andurirõngaga, koos rattakeskmega - Välisläbimõõt [mm]: 120
- Siseläbimõõt [mm]: 30
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal - Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Number of Holes: 5
- Supplementary Article/Info 2: with rubber mount
- Number of Teeth: 43
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Manufacturer: SNR
- Name: SN R157.20
- Fitting Position: Rear Axle
- Required quantity: 2
- Weight [kg]: 1.74
- Packaging length [cm]: 13.7
- Packaging width [cm]: 13.1
- Packaging height [cm]: 7.3
- Supplementary Article/Info 2: with ABS sensor ring
- Outer Diameter [mm]: 120
- Rim Hole Number: 5
-
Manufacturer: CONTITECH-
LOÅ»YSKA KÃÅ
- Installatsiooni pool: taga
- Piirangutega toode/piirangu info 2: koos poltidega
- Üldine informatsioon: wheelhub with bearing; rear; with screws
- Manufacturer: BORSEHUNG
- Fitting Position: Rear Axle
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Outer Diameter [mm]: 120
- Inner Diameter [mm]: 30
- Width [mm]: 61.5
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 713610220
- Installatsiooni pool: Tagasild
- Ava Ø (mm): 100
- Aukude arv: 5
-
Kaal (kg): 1,
506 - Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu
- vajaminev tükihulk: 2
- Laius (mm): 63
- Siseläbimõõt [mm]: 30
- Välisläbimõõt [mm]: 120
- Laagriteostus: Rulllaager
- Üldine informatsioon: wheel hub with bearing; rear
- Manufacturer: BORSEHUNG
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks