• Diameter 4 [mm]: 23
• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 23
• Length from [mm]: 26
• Name: Stabilizer mount left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Inner Diameter [mm]: 14.5
• Outer Diameter [mm]: 29
• Length 1 [mm]: 22.5
• Length 2 [mm]: 18
• for OE number: 1J0411327
• Manufacturer: SASIC

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: GSP

• Quantity per packing unit: 2
• Fitting Position: Front Axle, inner
• Mounting Type: Rubber Mount
• Stabiliser Diameter [mm]: 21
• Inner Diameter [mm]: 19.5
• Length [mm]: 25
• Width [mm]: 37
• Height [mm]: 40
• for OE number: 1J0411314R
• Manufacturer: SASIC

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 1J0 411 314 G
• Manufacturer: GSP

• for PR number: 0AR
• Fitting Position: Front
• Inner Diameter [mm]: 20
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW
• Manufacturer: MAX

• Quantity per packing unit: 2
• Fitting Position: Front Axle, inner
• Mounting Type: Rubber Mount
• Stabiliser Diameter [mm]: 23
• Inner Diameter [mm]: 21.5
• Length [mm]: 25
• Width [mm]: 37
• Height [mm]: 40
• for OE number: 1J0411314T
• Manufacturer: SASIC

• for PR number: 0AQ
• Fitting Position: Front Axle
• Inner Diameter [mm]: 18
• Manufacturer: OYODO

• Fitting Position: Front Axle, Left, Right
• Diameter [mm]: 21
• Required quantity: 2
• Manufacturer: OYODO

• for PR number: 0AQ
• Inner Diameter [mm]: 19
• Observe service information:
• Fitting Position: Front Axle Left, Front Axle Right
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW
• Manufacturer: MAX

• Stabiliser Diameter [mm]: 21
• Quantity per packing unit: 4
• Mounting Type: Rubber Mount
• Inner Diameter [mm]: 21
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle, inner
• Weight [kg]: 0.105
• Inner Diameter [mm]: 16
• Mounting Type: Rubber Mount
• Length [mm]: 30
• Required quantity: 2
• Name: Kinnitus,stabilisaator
• Manufacturer: TED

• Fitting Position: Front Axle Left, Front Axle Right, inner
• Inner Diameter [mm]: 21
• Outer Diameter [mm]: 37
• Length [mm]: 19
• paired article number: 270726
• Weight [kg]: 0.02
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Front Axle both sides
• Weight [kg]: 0.06
• Material: Rubber with fabric lining, Rubber
• Required quantity: 2
• Inner Diameter [mm]: 19
• General Information: rubber bush; 19MM
• Manufacturer: VIKA

• Production date from: 06/99
• Quantity per packing unit: 2
• Fitting Position: Front Axle, inner
• Mounting Type: Rubber Mount
• Stabiliser Diameter [mm]: 18.5
• Inner Diameter [mm]: 17
• Length [mm]: 26
• Width [mm]: 40
• Height [mm]: 37
• for OE number: 1J0411314S
• Manufacturer: SASIC

• for PR number: 0AQ
• new version:
• Inner Diameter [mm]: 18
• Fitting Position: Front Axle
• Weight [kg]: 0.026
• Observe service information:
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle both sides
• Material: Steel
• Manufacturer: MERTZ

• Required quantity: 2
• Inner Diameter [mm]: 20
• Mounting Type: Rubber Mount
• Fitting Position: Front Axle, inner
• Length [mm]: 25
• Weight [kg]: 0.02
• Manufacturer: TEDGUM

• Weight [kg]: 0.05
• Required quantity: 2
• Fitting Position: Front
• General Information: clamp
• Manufacturer: VIKA

• for PR number: 0AE
• Inner Diameter [mm]: 10
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

Fitting Position: Lower, Front Axle both sides, Front Axle Left, Front Axle Right

• for PR number: 0AS
• Fitting Position: Front
• Stabiliser Diameter [mm]: 23
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW
• Manufacturer: MAX

• Fitting Position: Front Axle both sides
• Weight [kg]: 0.06
• Material: Rubber
• Required quantity: 2
• Inner Diameter [mm]: 21
• General Information: rubber bush; 21MM
• Manufacturer: VIKA

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 1J0 411 314 S
• Manufacturer: GSP AUTOMOTIVE

• Diameter 4 [mm]: 16
• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter [mm]: 16
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle both sides
• Name: KINNITUS,STABILISAATORIPAIGUTUS
• Manufacturer: MAX

• Diameter 4 [mm]: 16
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter [mm]: 32
• Inner Diameter [mm]: 16
• Height [mm]: 36
• Length from [mm]: 30
• Name: Stabilizer mount left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A4 01-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A4 01-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, inner
• Mounting Type: Rubber Mount
• Stabiliser Diameter [mm]: 21
• Inner Diameter [mm]: 19.5
• Length [mm]: 25
• Width [mm]: 36
• Height [mm]: 37
• for OE number: 1J0411314P
• Manufacturer: SASIC

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 32
• Length [mm]: 30
• Required quantity: 2
• Mounting Type: Rubber Mount
• Name: ALT 94626AL
• Manufacturer: ALTE AUTOMOTIVE

• for PR number: 0AR
• Quantity per packing unit: 4
• Inner Diameter [mm]: 20
• Mounting Type: Rubber Mount
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle both sides
• Mounting Type: Rubber Mount
• Weight [kg]: 0.026
• Inner Diameter [mm]: 17
• Length [mm]: 24.8
• Manufacturer: RTS

• Fitting Position: Front Axle
• Inner Diameter [mm]: 17
• Length [mm]: 25
• Required quantity: 2
• Height [mm]: 36
• Name: ALT 88928AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Axle beam
• General Information: Rubber bush for stabilizer bar
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle Left
• Material: Rubber
• Weight [g]: 36
• Inner Diameter [mm]: 11

• Fitting Position: Front
• Manufacturer: KAMOKA

• for PR number: 0AS
• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Stabiliser Diameter [mm]: 23
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle both sides, Lower
• Mounting Type: Rubber Mount
• Inner Diameter [mm]: 21
• Length [mm]: 24.6
• Weight [kg]: 0.024
• Manufacturer: RTS

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 19
• Outer Diameter [mm]: 39
• Length [mm]: 37
• Name: ALT 83244PAAL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 21
• Outer Diameter [mm]: 39
• Length [mm]: 37
• Name: ALT 83245PAAL
• Manufacturer: ALTE AUTOMOTIVE

• for PR number: 0AQ
• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Bore Diameter [mm]: 21
• Name: Kinnitus,stabilisaator
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle both sides
• Mounting Type: Rubber Mount
• Weight [kg]: 0.024
• Inner Diameter [mm]: 19
• Length [mm]: 24.8
• Manufacturer: RTS

• for PR number: 0AR
• Inner Diameter [mm]: 20
• Fitting Position: Front Axle
• Weight [kg]: 0.02
• Observe service information:
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front, inner, Left, Right
• for PR number: 0AS
• Quantity per packing unit: 2
• Inner Diameter 1 [mm]: 21
• Thickness 1 [mm]: 25
• Manufacturer: DELPHI
• Name: DE TD561W

• for PR number: 0AR
• Inner Diameter [mm]: 20
• Fitting Position: Front Axle
• Weight [kg]: 0.02
• Observe service information:
• Name: SW 32 92 2794
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front, Front Axle Left, Front Axle Right, inner
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 36
• Length [mm]: 25
• paired article number: 270449
• Weight [kg]: 0.03
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.05
• Observe service information:
• Name: KINNITUS,STABILISAATORIPAIGUTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right, inner
• Required quantity: 2
• Diameter [mm]: 21
• Weight [kg]: 0.1
• Packaging length [cm]: 11
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Manufacturer: MONROE

• Fitting Position: Front, inner, Left, Right
• for PR number: 0AQ
• Quantity per packing unit: 2
• Inner Diameter 1 [mm]: 19
• Thickness 1 [mm]: 25
• Manufacturer: DELPHI
• Name: DE TD560W

• for PR number: 0AR
• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Inner Diameter [mm]: 20
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• for PR number: 0AQ
• Inner Diameter [mm]: 19
• Observe service information:
• Fitting Position: Front Axle Left, Front Axle Right
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW 19MM Z OBEJM¤
• Manufacturer: MAX

• Inner Diameter [mm]: 21
• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with holder
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW 21MM Z OBEJM¤
• Manufacturer: MAX

• Fitting Position: Front Axle both sides
• Required quantity: 2
• Inner Diameter [mm]: 21
• paired article number: VKDS 351005
• Manufacturer: SKF
• Name: SK VKDS351005

• Fitting Position: Rear Axle Left, Rear Axle Right, inner
• Inner Diameter [mm]: 11
• Outer Diameter [mm]: 32
• Length [mm]: 30
• paired article number: 270862
• Weight [kg]: 0.03
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• for PR number: 0AR
• Inner Diameter [mm]: 20
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.07
• Name: Ootshoovad - K„„ndmik. VW P. GOLF 4/A3
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Stabiliser Diameter [mm]: 14, 15, 16, 13
• Block Separation:
• Inner Diameter [mm]: 10
• Fitting Position: Rear Axle
• Mounting Type: Rubber Mount
• Weight [kg]: 0.03
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Paigutus - K„„ndmik VW T. GOLFIV /BORA/ A3/ A4 4MOTION/QUATTRO

• Fitting Position: Front Axle Left, Front Axle Right, inner
• Inner Diameter [mm]: 20
• Outer Diameter [mm]: 36
• Length [mm]: 26
• Stabiliser Diameter [mm]: 21
• paired article number: 270725
• Weight [kg]: 0.03
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Stabiliser Diameter [mm]: 14, 15, 16, 13
• Block Separation:
• Inner Diameter [mm]: 10
• Fitting Position: Rear Axle
• Mounting Type: Rubber Mount
• Weight [kg]: 0.03
• Name: SW 30 93 8769
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: 0AQ
• Inner Diameter [mm]: 18
• Fitting Position: Front Axle
• Weight [kg]: 0.076
• Supplementary Article/Info 2: with screw
• Supplementary Article/Supplementary Info: with holder
• Observe service information:
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Ootshoovad - K„„ndmik. VW P. GOLF4/A3 18MM KPL. ZE —RUB¤ NA JEDN¤ STRON¨

• Fitting Position: Left, Right, inner, outer
• for combined PR number: 0AS
• Required quantity: 2
• Diameter [mm]: 23
• Mounting Type: Rubber Mount
• Weight [kg]: 0.1
• Packaging length [cm]: 11
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Manufacturer: MONROE

• Stabiliser Diameter [mm]: 14, 15, 16, 13
• Block Separation:
• Fitting Position: Rear Axle Left, Rear Axle Right
• Mounting Type: Rubber Mount
• Inner Diameter [mm]: 10
• Guarantee: 3 years guarantee or up to 75,000km
• Manufacturer: METZGER

• Material: PU (Polyurethane)
• Required quantity: 2
• Fitting Position: Front Axle, inner
• Shore-A hardness value, base body: 80
• Supplementary Article/Info 2: with grease cap
• Weight [kg]: 0.02
• Colour: red
• Inner Diameter [mm]: 20
• Length [mm]: 25
• Name: Kinnitus,stabilisaator
• Manufacturer: TED

• for PR number: 0AE, 0AS
• Block Separation:
• Inner Diameter [mm]: 21
• Fitting Position: Front Axle
• Weight [kg]: 0.11
• Supplementary Article/Info 2: with screw
• Supplementary Article/Supplementary Info: with holder
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 2
• Fitting Position: Rear Axle
• Weight [kg]: 0.03
• Length [mm]: 30
• Inner Diameter [mm]: 12
• Mounting Type: Rubber Mount
• Name: Kinnitus,stabilisaator
• Manufacturer: TED

• Fitting Position: Front Axle, inner
• Length [mm]: 25
• Weight [kg]: 0.022
• Required quantity: 2
• Shore-A hardness value, base body: 80
• Inner Diameter [mm]: 21
• Colour: red
• Material: PU (Polyurethane)
• Supplementary Article/Info 2: with grease cap
• Name: Kinnitus,stabilisaator
• Manufacturer: TED

• Supplementary Article/Info 2: with grease cap
• Fitting Position: Front Axle, inner
• Length [mm]: 25
• Required quantity: 2
• Shore-A hardness value, base body: 80
• Inner Diameter [mm]: 19
• Colour: red
• Material: PU (Polyurethane)
• Weight [kg]: 0.023
• Manufacturer: TEDGUM

• Weight [kg]: 0.05
• Required quantity: 2
• Length [mm]: 25
• Fitting Position: Front Axle, inner
• Supplementary Article/Info 2: with grease cap
• Material: PU (Polyurethane)
• Colour: red
• Inner Diameter [mm]: 17
• Shore-A hardness value, base body: 80
• Manufacturer: TEDGUM