• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 7201592
• Manufacturer: GSP

• Inner Diameter [mm]: 14
• Weight [kg]: 0.056
• Required quantity: 2
• Fitting Position: Front Axle
• Name: Laager,amorditugilaager
• Manufacturer: TED

• Fitting Position: Front Axle
• Weight [kg]: 0.06
• Name: DY 73-24038
• Manufacturer: DYS

• Fitting Position: Front Axle
• for OE number: 1J0412249
• Manufacturer: SASIC

• Width [mm]: 13.5
• Weight [kg]: 0.08
• Bearing Type: Angular Ball Bearing
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 45
• Material: Plastic
• Required quantity: 2
• Fitting Position: Front Axle
• General Information: deep groove ball thrust bearing; front
• Manufacturer: VIKA

• Quantity per packing unit: 10
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Quality class: PJ
• Name: Top mount left, right

• Fitting Position: Front Axle
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• General Information: suspension strut storage; front; aluminum
• Manufacturer: VIKA

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 1J0 412 331 B
• Manufacturer: GSP

• Fitting Position: Front Axle
• for OE number: 1H0412303B
• for manufacturer number: 2020030
• Manufacturer: KAMOKA

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with bearing
• Fabrication Number: AD-VW-006
• Manufacturer: NTY

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 814006710

• Outer Diameter 1 [mm]: 65
• Height [mm]: 53
• Outer Diameter 2 [mm]: 82
• Fitting Position: Front Axle Right
• Manufacturer: SNR /NTN-SNR/
• Name: SN KBLF410.82

Vehicle Identification Number (VIN): [5J-93120 133;], [5J-95032 165;], [5J-9A508 237;], [5J-9B505 016;], [5J-9B601 132;], [5J-9K506 834;]

• Suspension: for vehicles with sports suspension
• Fitting Position: Right, Left, Front Axle
• Outer Diameter 1 [mm]: 45
• Width 1 [mm]: 13
• Inner Diameter 1 [mm]: 14
• Manufacturer: SNR /NTN-SNR/
• Name: SN M254.01

Vehicle Identification Number (VIN): [5J-93120 133;], [;5J-95032 164], [5J-9A508 237;], [5J-9B505 016;], [;5J-9B601 131], [5J-9K506 834;]

• Fitting Position: Front Axle Right, Front Axle Left
• Supplementary Article/Info 2: without bearing
• Weight [kg]: 0.26
• Name: DY 73-24097
• Manufacturer: DYS

• Fitting Position: Front Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle
• Weight [kg]: 0.237
• Required quantity: 2
• Thickness [mm]: 54
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Supplementary Article/Info 2: without ball bearing
• General Information: Shock absorber top rubber; front
• Manufacturer: VIKA

• Fitting Position: Front Axle Left, Front Axle Right
• Height [mm]: 53
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: BGA

• Fitting Position: Front Axle
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: GSP

• Inner Diameter [mm]: 26
• Height [mm]: 54
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.237
• Supplementary Article/Info 2: without ball bearing
• Observe service information:
• Name: Laager - K„„ndmik. VW P. GOLF 4
• Manufacturer: FEB
• Additional information: FE09227
• Lisainfo: FE09227

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Name: CFD 150201
• Manufacturer: DACO

• Mounting Type: Rubber Mount
• Fitting Position: Front Axle
• for OE number: 1J0412331C
• Manufacturer: SASIC

• Height [mm]: 54
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.237
• Supplementary Article/Info 2: without ball bearing
• Name: SW 30 54 0012
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for combined PR number: UA9,1JA,1JD
• Fitting Position: Rear Axle
• Diameter [mm]: 16
• Weight [kg]: 0.245
• reinforced version:
• Packaging length [cm]: 20
• Packaging width [cm]: 8
• Packaging height [cm]: 8
• Manufacturer: FEBEST

• Weight [kg]: 0.237
• Fitting Position: Front Axle
• Thickness [mm]: 54
• Required quantity: 2
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Supplementary Article/Info 2: without ball bearing
• General Information: Shock absorber top rubber; front
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle
• Weight [kg]: 0.1
• Packaging length [cm]: 6
• Packaging width [cm]: 4.9
• Packaging height [cm]: 5.1
• Manufacturer: MONROE

• Fitting Position: Front Axle
• Weight [kg]: 0.237
• Required quantity: 2
• Thickness [mm]: 54
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Supplementary Article/Info 2: without ball bearing
• General Information: Shock absorber rubber kit; front
• Manufacturer: VIKA

• Fitting Position: Front Axle
• General Information: Rubber and dust cover kit; front
• Manufacturer: VIKA

• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A3/OCTAVIA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• General Information: Rubber and dust cover kit; front
• Manufacturer: VIKA

• Inner Diameter [mm]: 26
• Height [mm]: 53
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.317
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. VW P. GOLF 4 98- KPL. Z O½YSKIEM

• Inner Diameter [mm]: 14
• for OE number: 1J0 412 331 C S1
• Material: Rubber/Metal
• Fitting Position: Front Axle both sides
• Outer Diameter [mm]: 83
• Supplementary Article/Info 2: with bearing
• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A3/TT/SKODA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A3/TT/SKODA
(kvaliteediklass: PJ)"

• Quantity per packing unit: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: AB-VW-016K
• Manufacturer: NTY

• Fitting Position: Front Axle
• General Information: Shock absorber bearing; front
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle
• General Information: Rubber and dust cover kit; rear
• Manufacturer: VIKA

• Fitting Position: Front Axle
• for OE number: 1H0412303B
• Manufacturer: KAMOKA AMORTYZATORY

• Inner Diameter [mm]: 26
• Height [mm]: 53
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.317
• Supplementary Article/Info 2: with ball bearing
• Name: SW 30 55 0008
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• for OE number: 1J0513353B
• Manufacturer: SASIC

• Fitting Position: Rear Axle
• General Information: Rubber and dust cover kit; rear
• Manufacturer: VIKA

• Material: PU (Polyurethane), Plastic
• Fitting Position: Front Axle
• Manufacturer: MAX

Name: ZESTAW MONTA½OWY AMORTYZATORA VW P. BORA/VENTO/IBIZA 97- (ODBOJE OSONY)

• Fitting Position: Front Axle Right, Front Axle Left
• for OE number: 344417
• Manufacturer: AUTOFREN SEINSA
• Name: SE D5-048

• Fitting Position: Front Axle
• Technical Information: Suspension mounting + separated suspension bearing
• Manufacturer: KYB

Name: Laager - K„„ndmik. FORD P. GALAXY/ SEAT ALHAMBRA, CORDOBA, IBIZA II, INCA, TOLEDO/ VW CADDY II, CORRADO, GOLF III, IV, PASSAT, POLO, SHARAN,

• Number of Parts [parts]: 2
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: SNR
• Name: SN KB657.08

• Fitting Position: Rear Axle
• Weight [kg]: 0.28
• Required quantity: 2
• Material: Aluminium, Rubber/Metal
• General Information: Shock absorber upper cover
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with rolling bearing
• Guarantee: 5 years guarantee
• Weight [kg]: 0.4
• Packaging length [cm]: 8.1
• Packaging width [cm]: 8.1
• Packaging height [cm]: 9
• Manufacturer: MONROE

• for OE number: 1J0513353D
• Fitting Position: Rear Axle
• Manufacturer: KAVO PARTS

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version

• Fitting Position: Rear Axle
• Weight [g]: 280
• General Information: Shock absorber upper cover; rear
• Manufacturer: BORSEHUNG
• Additional information: 1J0513353G BOR
• Lisainfo: 1J0513353G BOR

• for OE number: 1J0513353B
• Fitting Position: Rear Axle
• Technical Information: Suspension mounting only (no bearing)
• Manufacturer: KYB

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version Name: Laager - K„„ndmik. AUDI T. A1, A2, A3, TT/ SEAT CORDOBA, IBIZA IV, V, LEON/ SKODA FABIA, OCTAVIA, ROOMSTER/ VW BORA, FOX, GOLF IV, NEW BEETL

• Fitting Position: Rear Axle
• Suspension: for vehicles without sports suspension
• SVHC: No SVHC present!
• Name: Vedruamordi tugilaager
• Manufacturer: FAG

• Suspension: for vehicles with standard suspension
• for PR number: 1GC
• Material: PU (Polyurethane), Rubber
• Fitting Position: Front Axle
• Weight [kg]: 0.5
• Name: PUHVER, VEDRUSTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles without lifted suspension
• not for combined PR number: 1GB+1GW+G39
• Material: PU (Polyurethane), Rubber
• Fitting Position: Front Axle
• Weight [kg]: 0.201
• Name: PUHVER, VEDRUSTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles without lifted suspension
• not for combined PR number: 1GB+1GW+G39
• Material: PU (Polyurethane), Rubber
• Fitting Position: Front Axle
• Weight [kg]: 0.201
• Name: SW 30 56 0029
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Right, Rear Axle
• Number of Parts [parts]: 1
• Width 1 [mm]: 57
• Outer Diameter 1 [mm]: 64
• Manufacturer: SNR

• Fitting Position: Front Axle
• for OE number: 357412303F
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 11
• Outer Diameter [mm]: 61
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Suspension: for vehicles with standard suspension
• for PR number: 1GC, 1GU, G36, G37
• Block Separation:
• Length [mm]: 300
• Width [mm]: 80
• Material: PU (Polyurethane), Plastic
• Fitting Position: Front Axle
• Weight [kg]: 0.16
• Name: Puhver, vedrustus
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Quantity per axle: 2
• Alternative Repair Kit: 108 561
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Info 2: without rolling bearing
• General Information: Shock absorber rubber kit
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle
• Name: Laager - K„„ndmik. VW P. GOLF 4 KPL.
• Manufacturer: BIL
• Quality class: Q

• for combined PR number: UA9,1JA,1JD
• Fitting Position: Rear Axle
• Height [mm]: 128
• Weight [kg]: 0.322
• Packaging length [cm]: 17.5
• Packaging width [cm]: 11.5
• Packaging height [cm]: 5.9
• Manufacturer: FEBEST

• Quantity: 2
• Fitting Position: Front Axle
• Quantity Unit: Kit
• General Information: Rubber and dust cover kit; front; 2 pcs
• Manufacturer: BORSEHUNG

• Quantity: 2
• Fitting Position: Rear Axle
• Quantity Unit: Kit
• General Information: Rubber and dust cover kit; rear; 2 pcs
• Manufacturer: BORSEHUNG

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Manufacturer: BILSTEIN
• Name: Shock absorber protection kit left+right
• Quality class: Q

Additional information: "Tootja: BILSTEIN
AUDI/VW/SEAT/SKODA
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
AUDI/VW/SEAT/SKODA
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Weight [kg]: 0.237
• Required quantity: 2
• Thickness [mm]: 54
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Supplementary Article/Info 2: without ball bearing
• General Information: Rubber and dust cover kit
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Weight [kg]: 0.237
• Required quantity: 2
• Thickness [mm]: 54
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 83
• Material: Rubber/Metal
• Supplementary Article/Info 2: without ball bearing
• General Information: Rubber and dust cover kit
• Manufacturer: VIKA