• Construction Year to: 09.1987
• Engine Code: ACM + HZ
• Filter type: In-Line Filter
• Height [mm]: 142
• Outer Diameter [mm]: 32
• Outer Diameter 1 [mm]: 37
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Engine Code: AAK + AAU
• Filter type: In-Line Filter
• Height [mm]: 164
• Outer Diameter [mm]: 74
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Outer Diameter 1 [mm]: 81
• SVHC: No SVHC present!
• Manufacturer: MANN-FILTER
• Lisainfo: WK 830/7 MAN
• Additional information: WK 830/7 MAN

• Construction Year from: 02.1985
• Construction Year to: 08.1990
• Fitting Position: Front Axle
• Brake System: Kelsey-Hayes
• Height [mm]: 51.3
• Width [mm]: 138
• Thickness [mm]: 17.3
• Wear Warning Contact: excl. wear warning contact
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, front, 17.3 mm
• Additional information: Brake pad set, front, 17.3 mm

• Filter type: Spin-on Filter
• Outer Diameter [mm]: 36
• Inner Diameter [mm]: 6
• Height [mm]: 105
• Name: Fuel filter
• Quality class: PJ

Lisainfo: "Tootja: COOPERSFIAAM FILTERS
UNI
(kvaliteediklass: PJ)" Additional information: "Tootja: COOPERSFIAAM FILTERS
UNI
(kvaliteediklass: PJ)"

• Outer Diameter [mm]: 31.5
• Length [mm]: 140
• Width [mm]: 95
• Height [mm]: 142
• Filter type: Spin-on Filter
• Outer Diameter 1 [mm]: 37
• Weight [kg]: 0.104
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ACM / HZ
• Filter type: In-Line Filter
• Outer Diameter [mm]: 36
• Overall Length [mm]: 136
• Manufacturer: HENGST FILTER

• Filter type: In-Line Filter
• Fuel Type: Petrol
• Height [mm]: 125
• Outer Diameter [mm]: 48
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6
• Manufacturer: KAMOKA FILTRY PALIWA

• Construction Year from: 08.1986
• Construction Year to: 12.1992
• Engine Code: HZ
• Filter type: In-Line Filter
• Height [mm]: 116
• Outer Diameter [mm]: 51
• Outer Diameter 1 [mm]: 44
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6
• Weight [kg]: 0.07
• Manufacturer: VALEO

• Engine Code: ACM + HZ
• Filter type: In-Line Filter
• Height [mm]: 118
• Outer Diameter [mm]: 48
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Engine Code: HZ
• Filter type: In-Line Filter
• Length [mm]: 97
• Outer Diameter [mm]: 49
• Diameter 1/ Diameter 2 [mm]: IN/OUT: 8
• Manufacturer: JAPKO

• Construction Year from: 08.1985
• Construction Year to: 07.1992
• for OE number: 251201511G
• Engine Code: HZ
• Height [mm]: 142
• Outer Diameter [mm]: 31.5
• Outer Diameter 1 [mm]: 37
• Outlet Ø [mm]: 6.5
• Inlet Ø [mm]: 8.4
• Filter type: Filter Insert
• Manufacturer: SOFIMA

• Engine Code: HZ, ACM
• for model code: 86,87, 80
• Construction Year from: 08.1985, 10.1990
• Construction Year to: 08.1990, 12.1992
• Block Separation:
• Filter type: In-Line Filter
• Diameter [mm]: 48
• Height [mm]: 117.5
• Inlet Ø [mm]: 7.2
• Outlet Ø [mm]: 7.2
• Manufacturer: BOSCH
• Name: BS F026403169

• Filter type: In-Line Filter
• Diameter [mm]: 30
• Height [mm]: 143.5
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6.1
• Net Weight [g]: 17
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Packaging length [cm]: 8
• Manufacturer: KNECHT
• Name: KN KL15OF

• Engine Code: ACM + HZ
• Filter type: In-Line Filter
• Height [mm]: 142
• Outer Diameter [mm]: 32
• Outlet Ø [mm]: 6
• Outer Diameter 1 [mm]: 37
• Outer Diameter 2 [mm]: 8
• SVHC: No SVHC present!
• Manufacturer: MANN-FILTER

• Engine Code: AAU, AAK
• Fuel Mixture Formation: Petrol Injection
• Outer Diameter 1 [mm]: 75
• Outer Diameter 2 [mm]: 81
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Height 1 [mm]: 110
• Height 2 [mm]: 158
• Filter type: In-Line Filter
• Manufacturer: DELLO AUTOMEGA

• Engine Code: HZ, AAK, ACM, AAU
• Height [mm]: 118
• Fuel Type: Petrol
• Filter type: In-Line Filter
• External Thread [mm]: 6
• Outer Diameter [mm]: 48
• Manufacturer: MAGNETI MARELLI

• Filter type: In-Line Filter
• Fuel Type: Petrol
• Height [mm]: 157
• Outer Diameter 1 [mm]: 82
• Outer Diameter 2 [mm]: 74
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Manufacturer: KAMOKA FILTRY PALIWA

• Engine Code: AAK + AAU
• Filter type: Spin-on Filter
• Height [mm]: 164
• Outer Diameter 1 [mm]: 74
• Outer Diameter 2 [mm]: 81
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Manufacturer: JP GROUP
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Outer Diameter 1 [mm]: 80
• Inner Diameter 1 [mm]: 8
• Inner Diameter 2 [mm]: 8
• Height [mm]: 163
• Filter type: In-Line Filter
• Manufacturer: DENCKERMANN FILTRY

• Engine Code: AAK + AAU
• Height [mm]: 156
• Outer Diameter [mm]: 81.5
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Filter type: In-Line Filter
• Name: CFD DFF0100
• Manufacturer: DACO

• Filter type: In-Line Filter
• Length [mm]: 159
• Housing material: Metal
• Outer Diameter [mm]: 81
• Weight [kg]: 0.25
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: HZ, AAU
• for model code: 86,87, 80
• Construction Year from: 08.1985, 10.1990
• Construction Year to: 08.1990, 10.1990
• Block Separation:
• Engine Number to: HZ 786 022
• Number of Teeth: 108
• Length [mm]: 1,029
• Width [mm]: 19
• Tooth Pitch [mm]: 9.525
• Manufacturer: BOSCH

• Filter type: In-Line Filter
• Housing material: Metal
• Length [mm]: 159
• Outer Diameter [mm]: 81
• Weight [kg]: 0.25
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Camshaft
• Trim Level: >015 867
• Number of Teeth: 108
• Width [mm]: 19
• Manufacturer: DAYCO
• Name: DA 94145

• Engine Code: AAK + AAU
• Fuel Type: Petrol
• Outlet Ø [mm]: 8
• Outer Diameter 1 [mm]: 81
• Height [mm]: 163.5
• Outer Diameter [mm]: 74
• Inlet Ø [mm]: 8
• Weight [kg]: 0.323
• Filter type: In-Line Filter
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Driven Units: Camshaft
• Trim Level: 015 868>
• Number of Teeth: 128
• Width [mm]: 19
• Manufacturer: DAYCO
• Name: DA 94303
• Lisainfo: 94303 DAY
• Additional information: 94303 DAY

• Construction Year from: 10.1990
• Engine Code: AAU
• Filter type: In-Line Filter
• Height [mm]: 165
• Outer Diameter [mm]: 83
• Outer Diameter 1 [mm]: 75
• Inlet Ø [mm]: 9
• Outlet Ø [mm]: 9
• Weight [kg]: 0.23
• Manufacturer: VALEO
• Name: VA 587004

• Engine Code: AAK, AAU
• Height [mm]: 159
• Outer Diameter [mm]: 81
• Packing Type: Box
• Filter type: In-Line Filter
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Packaging length [cm]: 8.5
• Packaging width [cm]: 8.5
• Packaging height [cm]: 17.3
• Name: CH CFF100206
• Manufacturer: CHAMPION

• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Diameter 1 [mm]: 75
• Diameter 2 [mm]: 8
• Diameter [mm]: 81
• Height 1 [mm]: 110
• Height [mm]: 158
• Fuel Mixture Formation: Petrol Injection
• Fuel Type: Petrol
• Filter type: In-Line Filter
• General Information: fuel filter
• Manufacturer: BORSEHUNG

• Engine Code: AAK + AAU
• Filter type: In-Line Filter
• Height [mm]: 156
• Outer Diameter [mm]: 81.5
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Engine Code: AAU, HZ, ACM
• for model code: 80
• Construction Year from: 11.1990, 02.1992
• Engine Number from: HZ 786 023
• Block Separation:
• Construction Year to: 12.1992
• Number of Teeth: 128
• Length [mm]: 1,024
• Width [mm]: 19
• Tooth Pitch [mm]: 8
• Manufacturer: BOSCH

• Engine Code: AAK + AAU
• Filter type: Filter Insert
• Diameter 1 [mm]: 74
• Diameter 2 [mm]: 8
• Diameter 3 [mm]: 8
• Height [mm]: 154
• Name: CL MBNA 957
• Manufacturer: CLEAN FILTERS

• Construction Year from: 08.1985
• Construction Year to: 07.1992
• Driven Units: Camshaft
• Engine Number to: HZ786022
• Block Separation:
• Engine Code: AAK
• Number of Teeth: 108
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.13
• Width [mm]: 19
• Tooth Pitch [mm]: 9.525
• Manufacturer: CONTITECH
• Name: CT 633

• Vehicle Identification Number (VIN) to: ..-F-127903
• Fitting Position: Front Axle
• Width [mm]: 61.7
• Height [mm]: 56.8
• Thickness [mm]: 15.3
• Brake System: ATE
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact

• Construction Year from: 08.1985
• Construction Year to: 07.1992
• Driven Units: Camshaft
• Engine Code: AAU
• Engine Number to: AAU 015867
• Article number of the recommended special tool: STT-1
• Belt Material: Polychloroprene (Neoprene)
• Number of Teeth: 108
• Width [mm]: 19
• Tooth Pitch [mm]: 9.525
• Length [mm]: 1,029
• Manufacturer: GATES PASKI PRZEWODY

• Construction Year to: 12.1988
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Supplementary Article/Supplementary Info: with lever
• Test Mark: ECE R90
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Filter type: In-Line Filter
• Fuel Mixture Formation: Petrol Injection
• Diameter [mm]: 81
• Height [mm]: 158
• Height 1 [mm]: 110
• Diameter 1 [mm]: 75
• Diameter 2 [mm]: 8
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• General Information: fuel filter; gasoline
• Manufacturer: VIKA

• Engine Code: AAK / AAU
• Filter type: In-Line Filter
• Outer Diameter [mm]: 82
• Overall Length [mm]: 157
• Manufacturer: HENGST FILTER

• Construction Year from: 08.1985
• Construction Year to: 07.1992
• for OE number: 1H0201511A
• Engine Code: AAK, AAU
• Height [mm]: 156
• Outer Diameter [mm]: 74
• Outer Diameter 1 [mm]: 81
• Outlet Ø [mm]: 8
• Inlet Ø [mm]: 8
• Filter type: Filter Insert
• Manufacturer: SOFIMA

• Engine Number to: 015 867
• Width [mm]: 19
• Number of Teeth: 108
• Belts: with trapezoidal tooth profile
• Weight [kg]: 0.09
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 09.1990
• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles without ABS
• for PR number: 1KA
• Width [mm]: 31
• Brake System: ATE
• Inner brake drum diameter [mm]: 180
• Manufacturer: LPR
• Name: LPR 00140

• Construction Year to: 02.1985
• Fitting Position: Front Axle
• Thickness [mm]: 15.3
• Width [mm]: 61.7
• Height [mm]: 56.5
• Brake System: ATE
• Weight [kg]: 0.58
• Manufacturer: TOMEX BRAKES

• Fitting Position: Front Axle
• Construction Year to: 01.1990
• FMSI Code: D96-7032
• WVA Number: 20228
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear indicator
• Width 1 [mm]: 61.9
• Width 2 [mm]: 61.7
• Height 1 [mm]: 56.5
• Height 2 [mm]: 56.5
• Thickness 1 [mm]: 14.9
• Thickness 2 [mm]: 14.9
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Construction Year to: 12.1988
• Diameter [mm]: 180
• Width [mm]: 31
• Fitting Position: Rear Axle
• Brake System: VAG
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Width [mm]: 31
• Brake System: ATE
• Supplementary Article/Info 2: with handbrake lever
• Inner brake drum diameter [mm]: 180
• Manufacturer: BREMBO
• Name: BR S 85 507

• Construction Year to: 09.1990
• Fitting Position: Rear Axle
• Width [mm]: 31
• Brake System: Ate/Teves
• Inner brake drum diameter [mm]: 180
• Weight [kg]: 1.03
• Manufacturer: TOMEX BRAKES

• Construction Year from: 08.1985
• Construction Year to: 07.1992
• Driven Units: Camshaft
• Engine Code: AAU
• Engine Number from: AAU 015868
• Article number of the recommended special tool: STT-1
• Belt Material: Polychloroprene (Neoprene)
• Number of Teeth: 128
• Width [mm]: 19
• Tooth Pitch [mm]: 8
• Length [mm]: 1,024
• Manufacturer: GATES

• Construction Year to: 12.1988
• Vehicle Identification Number (VIN) from: F-127904
• Fitting Position: Front Axle
• Brake System: KELSEY-HAYES
• Height [mm]: 51.2
• Thickness [mm]: 17
• Width [mm]: 137.8
• Manufacturer: LPR

• Construction Year from: 08.1985
• Construction Year to: 07.1992
• Driven Units: Camshaft
• Engine Number from: HZ786023
• Number of Teeth: 128
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.15
• Width [mm]: 19
• Tooth Pitch [mm]: 8
• Manufacturer: CONTINENTAL CTAM
• Additional information: CT629
• Lisainfo: CT629

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Weight [kg]: 1.14
• Brake System: VAG
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• for brake disc thickness [mm]: 10
• for brake disc diameter [mm]: 239
• Length [mm]: 61.7
• Width [mm]: 56.5
• Fitting Position: Front Axle
• Thickness 1 [mm]: 15.3
• Wear Warning Contact: excl. wear warning contact
• Weight [kg]: 0.7
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Construction Year from: 01.1990
• Construction Year to: 01.1992
• Test Mark: E1 90R-01881/514
• WVA Number: 20889
• Brake System: Kelsey Hayes
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear indicator
• Width 1 [mm]: 137.7
• Width 2 [mm]: 137.7
• Height 1 [mm]: 50.1
• Height 2 [mm]: 50.1
• Thickness 1 [mm]: 17
• Thickness 2 [mm]: 17
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP505

• Construction Year from: 10.1990
• Engine Code: AAU
• Diameter [mm]: 82
• Material: Plastic
• Filter type: In-Line Filter
• Height [mm]: 157
• Manufacturer: DELPHI

• Engine Code: AAU
• Construction Year from: 10.1990
• Fuel Mixture Formation: Petrol Injection
• Filter type: In-Line Filter
• Diameter [mm]: 81
• Height [mm]: 161
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Manufacturer: BOSCH
• Name: BS 0450905030

• Construction Year to: 12.1988
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Supplementary Article/Supplementary Info: with lever
• Test Mark: E1 90R-011043/034
• MAPP code available:
• Article number of recommended accessories: 03.0137-9008.2
• Observe dimensions:
• Manufacturer: ATE

• Engine Code: HZ
• for model code: 86,87
• Construction Year from: 08.1985
• Construction Year to: 08.1990
• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with spring
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 20889
• Number of springs: 4
• Thickness [mm]: 17.2
• Width [mm]: 137.8
• Height [mm]: 51.2
• Manufacturer Restriction: Kelsey-Hayes System
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Brake System: V.A.G.
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Name: DE LS1276
• Manufacturer: DELPHI

• Construction Year from: 08.1992
• Fitting Position: Front Axle
• for PR number: 1LA
• Thickness [mm]: 17
• Width [mm]: 137.8
• Height 1 [mm]: 51.2
• Height 2 [mm]: 49
• Brake System: KELSEY-HAYES
• Manufacturer: LPR
• Additional information: 05P591
• Lisainfo: 05P591

• Fitting Position: Rear Axle
• Diameter [mm]: 180
• Width [mm]: 30
• Brake Pad: with lining
• Manufacturer: JP GROUP
• Lisainfo: Brake shoe set, without E-mark, 180x30 mm
• Additional information: Brake shoe set, without E-mark, 180x30 mm

• Construction Year from: 02.1985
• Construction Year to: 08.1990
• Fitting Position: Front Axle
• Thickness [mm]: 17.3
• Width [mm]: 137.8
• Height [mm]: 51.2
• Supplementary Article/Supplementary Info: with accessories
• Brake System: VAG
• Weight [kg]: 1.1
• Manufacturer: TOMEX BRAKES

• Fitting Position: Front Axle
• Construction Year from: 01.1992
• FMSI Code: D206-7126 D280-7209
• Test Mark: E1 90R-01881/513
• WVA Number: 20887 20888
• Brake System: Kelsey Hayes
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear indicator
• Width 1 [mm]: 137.7
• Width 2 [mm]: 137.7
• Height 1 [mm]: 48.8
• Height 2 [mm]: 48.2
• Thickness 1 [mm]: 19.5
• Thickness 2 [mm]: 19
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP421

• Vehicle Identification Number (VIN) to: ..-F-127903
• Fitting Position: Front Axle
• Width [mm]: 61.7
• Height [mm]: 56.8
• Thickness [mm]: 15.3
• Brake System: ATE
• Test Mark: E9 90R-02A1248/1603
• MAPP code available:
• Article number of recommended accessories: 13.0460-0029.2, 13.0460-0115.2, 13.0460-0905.2
• Observe dimensions:
• Manufacturer: ATE

Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact

• Construction Year from: 02.1985, 09.1990
• Construction Year to: 08.1990
• Alternatively:
• Block Separation:
• Fitting Position: Front Axle
• Thickness [mm]: 17
• Width [mm]: 137.8
• Height 1 [mm]: 51.2
• Height 2 [mm]: 49
• Supplementary Article/Supplementary Info: with accessories
• Brake System: VAG
• Weight [kg]: 1.15
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle
• Brake System: ATE
• Supplementary Article/Supplementary Info: with lever
• Width [mm]: 31
• Inner brake drum diameter [mm]: 180
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Front Axle
• Construction Year from: 01.1992
• Test Mark: E1 90R-01881/513
• WVA Number: 20887 20888
• Brake System: Kelsey Hayes
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear indicator
• Width 1 [mm]: 137.7
• Width 2 [mm]: 137.7
• Height 1 [mm]: 50.1
• Height 2 [mm]: 48.2
• Thickness 1 [mm]: 19
• Thickness 2 [mm]: 19
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP756

• Vehicle Identification Number (VIN) from: ..-F-127904
• Construction Year to: 12.1988
• Fitting Position: Front Axle
• Width [mm]: 137.8
• Height [mm]: 51.5
• Thickness [mm]: 17.3
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Volkswagen
• Test Mark: E1 90R-01288/069
• MAPP code available:
• Article number of recommended accessories: 13.0460-0184.2
• Observe dimensions:
• Manufacturer: ATE
• Quality class: Q
• Name: Brake pads

Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact

• Construction Year from: 10.1990
• Fitting Position: Front Axle
• Brake System: VOLKSWAGEN
• Width [mm]: 138
• Height [mm]: 51.3
• Thickness [mm]: 17.2
• Width 2 [mm]: 127
• Height 2 [mm]: 47.7
• Thickness 2 [mm]: 17.2
• WVA Number: 20887
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.26
• Manufacturer: VALEO
• Name: VA 301258

• Fitting Position: Front Axle
• Construction Year from: 02.1985, 09.1990
• Construction Year to: 08.1990
• Alternatively:
• Block Separation:
• Width [mm]: 137.8
• Height [mm]: 50
• Thickness [mm]: 17.3
• Wear Warning Contact: not prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20887
• Brake System: Kelsey-Hayes
• Article number of recommended accessories: 82026700
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Weight [kg]: 1.25
• Manufacturer: TEXTAR

• Engine Code: HZ, ACM, AAU
• for model code: 86,87, 80
• Construction Year from: 08.1985, 10.1990
• Construction Year to: 08.1990
• Fitting Position: Rear Axle
• Block Separation:
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Brake Pad: with lining
• Manufacturer: BOSCH

• Engine Code: ACM, AAU, HZ
• for model code: 80
• Construction Year from: 10.1990
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with anti-squeak plate, with mounting manual
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 20887
• Number of springs: 4
• Thickness [mm]: 17.1
• Width [mm]: 126.9
• Height 1 [mm]: 51.3
• Height 2 [mm]: 49.1
• Manufacturer Restriction: Kelsey-Hayes System
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Construction Year from: 02.1985
• Construction Year to: 08.1990
• Width [mm]: 138
• Thickness [mm]: 17
• Height [mm]: 51
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Kelsey Hayes
• WVA Number: 20889
• Name: BR P 85 019
• Manufacturer: BREMBO

• Construction Year to: 12.1988
• Fitting Position: Rear Axle
• Brake System: VAG
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply, with lever
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Construction Year to: 07.1992
• Manufacturer Restriction: VAG
• Width [mm]: 137.8
• Height [mm]: 51.2
• Thickness [mm]: 17.3
• Wear Warning Contact: not prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• Test Mark: E1 90R 01024/085
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Construction Year from: 08.1992
• Manufacturer Restriction: VAG
• Width [mm]: 137.8
• Height [mm]: 49
• Thickness [mm]: 17
• Wear Warning Contact: not prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• Test Mark: E1 90R 01024/373
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Construction Year from: 08.1985
• Construction Year to: 07.1992
• Brake Disc Type: solid
• Manufacturer Restriction: VAG
• Wear Warning Contact: not prepared for wear indicator
• WVA Number: 20887, 20888
• Test Mark: E1 90R-01813/030
• Length [mm]: 137.7
• Thickness [mm]: 17.3
• Height [mm]: 48.6
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Fitting Position: Front Axle
• Construction Year from: 02.1985, 09.1990
• Construction Year to: 08.1990
• Alternatively:
• Block Separation:
• Width [mm]: 137.8
• Height [mm]: 50
• Thickness [mm]: 17.3
• Wear Warning Contact: not prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20887
• Brake System: Kelsey-Hayes
• Article number of recommended accessories: MBA1048
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Weight [kg]: 1.25
• Manufacturer: MINTEX

• Fitting Position: Rear Axle
• Construction Year to: 09.1990
• Manufacturer Restriction: VAG
• Test Mark: E1 90R 01195/017
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Construction Year from: 02.1985, 09.1990
• Construction Year to: 08.1990
• Block Separation:
• Width [mm]: 138
• Thickness [mm]: 17
• Height 1 [mm]: 48
• Height 2 [mm]: 49
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Kelsey Hayes
• WVA Number: 20887, 20888
• Name: BR P 85 024
• Manufacturer: BREMBO

• Number of track rollers: 1
• Number of belts: 1
• Width 1 [mm]: 18
• Number of Teeth 1: 121
• Manufacturer: SNR
• Name: SN KD457.01