• Vehicle Identification Number (VIN) from: 1H-SB019 476, 1H-SW062 539
• Fitting Position: Front Axle
• Height [mm]: 83
• Manufacturer: JP GROUP
• Lisainfo: Tower rubber stop
• Additional information: Tower rubber stop

• Construction Year from: 08.1994
• Fitting Position: Front Axle
• Manufacturer: JP GROUP
• Lisainfo: Antud 1 tk hind.
• Additional information: Antud 1 tk hind.

• Fitting Position: Rear Axle
• Material: Thermoplast
• Height [mm]: 90
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Material: Plastic
• Colour: black
• Manufacturer: JP-GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Weight [kg]: 0.013
• Outer Diameter [mm]: 19.5
• Width [mm]: 13
• Thread Size: M14 x 1,50
• Manufacturer: 3RG

• new version:
• Length [mm]: 84
• Inner Diameter [mm]: 54
• Outer Diameter [mm]: 75, 67
• Colour: black
• Material: Plastic
• Fitting Position: Front Axle
• Weight [kg]: 0.032
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Rear Axle Left, Rear Axle Right
• Material: Thermoplast
• Manufacturer: JP-GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Rear Axle
• Weight [kg]: 0.03
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: 1H-SB019475, 1H-SW062538
• Fitting Position: Front Axle both sides
• Thread Size: M 14 x 1,5
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thickness [mm]: 90
• Material: Plastic
• Fitting Position: Rear Axle
• Weight [kg]: 0.03
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 1H-SB019 475, 1H-SW062 538
• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Vehicle Identification Number (VIN) to: 1H-SB019475, 1H-SW062538
• Fitting Position: Front Axle Left, Front Axle Right
• Height [mm]: 84
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: F 1H-SB019 476, F 1H-SW062 539
• Length [mm]: 63
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) from: 1H-SB019476, 1H-SW062539
• not for PR number: 1BB
• not for country specific design: Brazil
• Fitting Position: Front Axle Right, Front Axle Left
• Height [mm]: 63
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) to: 1H-SW062 538, 1H-SB019 475
• Fitting Position: Front Axle
• Suspension: for vehicles with bad road version
• Inner Diameter [mm]: 19
• Thickness [mm]: 84
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) from: 1H-SB019 476, 1H-SW062 539
• Fitting Position: Front Axle
• Height [mm]: 63
• Lisainfo: Tower rubber stop
• Additional information: Tower rubber stop

• Vehicle Identification Number (VIN) to: 1H-SB019 475, 1H-SW062 538
• Suspension: for vehicles without bad road version
• Thickness [mm]: 13
• Outer Diameter [mm]: 19.5
• Internal Thread Size: M14 x 1,5
• Fitting Position: Front Axle
• Weight [kg]: 0.016
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles with bad road version
• Fitting Position: Rear Axle Left, Rear Axle Right
• Height [mm]: 146
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 2
• Fitting Position: Front Axle
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 60
• Height [mm]: 86
• Manufacturer: TEDGUM
• Name: TG 00720332

• Suspension: for vehicles with bad road version
• Vehicle Identification Number (VIN) from: 1H-SB019476, 1H-SW062539
• Fitting Position: Front Axle Right, Front Axle Left
• Height [mm]: 83
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Suspension: for vehicles with bad road version
• Length [mm]: 146
• Manufacturer: DELLO AUTOMEGA

• Construction Year to: 09.1994
• Fitting Position: Front Axle
• Height [mm]: 84
• for OE number: 357412303E
• Manufacturer: SASIC

• Vehicle Identification Number (VIN) to: 1H-SB019 475, 1H-SW062 538
• Fitting Position: Front Axle
• Material: Thermoplast
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Vehicle Identification Number (VIN) to: 1H-SB019 475, 1H-SW062 538
• Thickness [mm]: 84
• Inner Diameter [mm]: 18.5
• Material: Rubber
• Fitting Position: Front Axle
• Weight [kg]: 0.112
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 1H-SB019 476, 1H-SW062 539
• Internal Thread Size: M14 x 1,5
• Fitting Position: Front Axle
• Weight [kg]: 0.05
• Manufacturer: FEBI BILSTEIN
• Additional information: FE14099
• Lisainfo: FE14099

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 1H-SB019 475, 1H-SW062 538
• Thickness [mm]: 84
• Inner Diameter [mm]: 18.5
• Material: Rubber
• Fitting Position: Front Axle
• Weight [kg]: 0.112
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 1H-SB019476, 1H-SW062539
• Fitting Position: Front Axle
• Bellows Material: Thermoplast
• Height [mm]: 221.5
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Thickness [mm]: 83
• Weight [kg]: 0.1
• Required quantity: 2
• General Information: helper spring; front
• Manufacturer: VIKA

• Required quantity: 2
• Fitting Position: Rear Axle
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 56
• Height [mm]: 147
• Manufacturer: TEDGUM

• Vehicle Identification Number (VIN) from: 1H-SB019 476, 1H-SW062 539
• Thickness [mm]: 63
• Material: PU (Polyurethane)
• Fitting Position: Front Axle
• Weight [kg]: 0.09
• Name: SW 30 91 8365
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 12.1995
• Vehicle Identification Number (VIN) to: 1H-SB019 475, 1H-SW062 538
• Fitting Position: Front Axle
• Lisainfo: Tower rubber stop
• Additional information: Tower rubber stop

• Fitting Position: Rear Axle
• Height [mm]: 146
• Manufacturer: JP GROUP
• Lisainfo: Tower rubber stop, rear
• Additional information: Tower rubber stop, rear

• Suspension: for vehicles with bad road version
• Vehicle Identification Number (VIN) to: 1H-SB019475, 1H-SW062538
• Fitting Position: Front Axle
• Bellows Material: Thermoplast
• Height [mm]: 180
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 1H0412303B
• Fitting Position: Front Axle
• Height [mm]: 63
• Weight [g]: 45
• Inner Diameter 1 [mm]: 18
• Inner Diameter 2 [mm]: 22
• Name: IM 37245
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle
• Thickness [mm]: 63
• Weight [kg]: 0.09
• Required quantity: 2
• General Information: helper spring; front
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) to: 1H-062538, 1H-SB 019475
• Block Separation:
• Fitting Position: Front Axle
• Material: Rubber
• Inner Diameter [mm]: 19
• Thickness [mm]: 84
• Manufacturer: METZGER

• Vehicle Identification Number (VIN) to: 1H-SB019475, 1H-SW062538
• Fitting Position: Front Axle
• Bellows Material: Thermoplast
• Height [mm]: 215
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 10.1994
• Mounting Type: Rubber Mount
• Fitting Position: Front Axle
• Height [mm]: 222
• for OE number: 357413175A
• Manufacturer: SASIC

• Vehicle Identification Number (VIN) from: 1H-SB019 476, 1H-SW062 539
• Thickness [mm]: 225
• Material: Thermoplastic polyester elastomer
• Fitting Position: Front Axle
• Weight [kg]: 0.068
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 1H-SB019 476, 1H-SW062 539
• Thickness [mm]: 63
• Material: PU (Polyurethane)
• Fitting Position: Front Axle
• Weight [kg]: 0.09
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 1H-SB019 476, 1H-SW062 539
• Thickness [mm]: 225
• Material: Thermoplastic polyester elastomer
• Fitting Position: Front Axle
• Weight [kg]: 0.068
• Name: SW 30 60 0038
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Material: Thermoplastic polyester elastomer
• Thickness [mm]: 225
• Weight [kg]: 0.068
• Required quantity: 2
• General Information: protective pipe; front
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) from: 1H-SB019 476, 1H-SW062 539
• Thickness [mm]: 83
• Material: PU (Polyurethane)
• Fitting Position: Front Axle
• Weight [kg]: 0.1
• for OE number: 357 412 303 F
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front
• General Information: front strut bump stop
• Manufacturer: BORSEHUNG

• Vehicle Identification Number (VIN) to: 1H-SB019 475, 1H-SW062 538
• Length [mm]: 172.5
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.049
• for OE number: 357 413 175
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 6U6412303
• Fitting Position: Front Axle
• Weight [g]: 60
• Name: IM 32285
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle both sides
• General Information: dust boot
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle
• Thickness [mm]: 156
• Weight [kg]: 0.1
• Required quantity: 2
• General Information: helper spring; rear
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) from: 1H-SB019476, 1H-SW062539
• Block Separation:
• Suspension: for vehicles with bad road version
• Construction Year to: 07.1994
• Fitting Position: Front Axle both sides
• Thread Size: M 14 x 1,5
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front
• General Information: front strut bump stop
• Manufacturer: BORSEHUNG

• Thickness [mm]: 146
• Inner Diameter [mm]: 13.3, 10.5
• Outer Diameter [mm]: 55.6
• Material: PU (Polyurethane)
• Fitting Position: Rear Axle
• Weight [kg]: 0.11
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 146
• Inner Diameter [mm]: 13.3, 10.5
• Outer Diameter [mm]: 55.6
• Material: PU (Polyurethane)
• Fitting Position: Rear Axle
• Weight [kg]: 0.11
• Manufacturer: SWAG
• Name: SW 30 87 0003

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Construction Year to: 07.1994
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 811003230

• Fitting Position: Rear Axle
• Manufacturer: GSP

• Specification: Type: universal
• Diameter [mm]: 12
• Fitting Position: Front Axle
• Manufacturer: ASHIKA

• Specification: Type: universal
• Diameter [mm]: 12
• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Height [mm]: 146
• Outer Diameter [mm]: 55.6
• Material: PU (Polyurethane), Rubber
• Fitting Position: Rear Axle
• Weight [kg]: 0.2
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front
• Length [mm]: 210
• Weight [kg]: 0.08
• Material: Rubber
• Weight [g]: 80
• Inner Diameter 1 [mm]: 18
• Inner Diameter 2 [mm]: 71
• Manufacturer: METALCAUCHO

• Vehicle Identification Number (VIN) to: 1H-SB019 475, 1H-SW062 538
• Suspension: for vehicles with bad road version
• Thickness [mm]: 228.5
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.064
• for OE number: 1H0 413 175
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Quantity Unit: Set
• Manufacturer: JP GROUP
• Lisainfo: Tower rubber stop kit, rear
• Additional information: Tower rubber stop kit, rear

• Spanner Size: 18
• Fitting Position: Front Axle
• Thread Size: M12 x 1,5
• Weight [kg]: 0.095
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Height [mm]: 146
• Outer Diameter [mm]: 55.6
• Material: PU (Polyurethane), Rubber
• Fitting Position: Rear Axle
• Weight [kg]: 0.2
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 1H-S-062 539
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: LEMFÖRDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear
• General Information: rear strut bump stop
• Manufacturer: BORSEHUNG

• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Overall Height [mm]: 170
• Manufacturer: JAPKO

• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI/VW/SEAT
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle
• Component Number: ugu
• Manufacturer: KAMOKA AMORTYZATORY

• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: POLCAR
SEAT AROSA (6H)
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Manufacturer: JP GROUP

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with protective cap/bellow
• Quantity per axle: 1
• for OE number: 191 598 131S
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Overall Height [mm]: 170
• Manufacturer: KAYABA
• Name: KY 915401
• Lisainfo: 915401 KYB
• Additional information: 915401 KYB

Technical Information: Please refer to the technical drawing in "Documents"

• Installatsiooni pool: Tagasild
• Kõrgus (mm): 90
• Lisainfo: Dust Cover Kit, shock absorber
• Additional information: Dust Cover Kit, shock absorber

• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
SEAT/VW
(kvaliteediklass: PJ)"

• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Manufacturer: KAYABA
• Additional information: KYB910088
• Lisainfo: KYB910088

• Suspension: for vehicles without bad road version
• Fitting Position: Rear Axle
• Manufacturer: JAPKO

• Fitting Position: Front Axle, Front Axle both sides
• Suspension: for vehicles with standard suspension
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
SEAT/VW
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
SEAT/VW
(kvaliteediklass: PJ)"

• Quantity Unit: Set
• Fitting Position: Rear Axle
• Weight [kg]: 0.254
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Name: Shock absorber protection kit left+right
• Quality class: Q

Lisainfo: "Tootja: POLCAR
SEAT TOLEDO I (1L)
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• General Information: repair kit for shock absorber; front
• Manufacturer: VIKA

• Fitting Position: Front Axle Right, Front Axle Left
• for OE number: 344417
• Manufacturer: AUTOFREN REPERATURKI
• Name: SE D5-048

• Fitting Position: Rear Axle, Rear Axle both sides
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VOLKS./SKODA/SEAT
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VOLKS./SKODA/SEAT
(kvaliteediklass: PJ)"

• Construction Year to: 12.1997
• Fitting Position: Rear Axle
• Weight [kg]: 0.4
• Warranty: 5 years warranty
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

• Suspension: for vehicles without bad road version
• Fitting Position: Rear Axle
• Manufacturer: KAYABA

• Fitting Position: Front Axle
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!