Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year from: 02.1990
- Construction Year to: 07.1991
- Number of Cylinders: 4
- Manufacturer Restriction: Bosch
- Connector type: Pin
- Manufacturer: JP GROUP
- Lisainfo: Distributor cap
- Additional information: Distributor cap
- Construction Year to: 02.1990
- Number of Cylinders: 4
- Manufacturer Restriction: Bosch
- Connector type: Pin
- Lisainfo: Distributor cap
- Additional information: Distributor cap
- Manufacturer Restriction: BOSCH
- Resistor [kOhm]: 1
- Length [mm]: 37
- Height [mm]: 22
- Support plate diameter [mm]: 10.2
- Manufacturer: DELLO AUTOMEGA
- Manufacturer Restriction: BOSCH
- Manufacturer: DELLO AUTOMEGA
-
Construction Year to: 02.1990,
07.1991 -
Vehicle Identification Number (VIN) to: 24-
L- 060000, 24- M- 105000 - Block Separation:
-
Construction Year from: 02.1990,
07.1991 -
Vehicle Identification Number (VIN) from: 24-
L- 060001, 24- M- 105 001 - Colour: red
- Weight [kg]: 0.023
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Manufacturer Restriction: System BOSCH
- Interference suppressed:
-
Resistor [Ohm]: 1,
000 - Name: STEJAGAJA
- Manufacturer: BRM
- Lisainfo: 7001 BREMI
- Additional information: 7001 BREMI
- Manufacturer Restriction: System BOSCH
- Interference suppressed:
- Name: STEJAGAJA
- Manufacturer: MAX
-
Lisainfo: 31-
0207 -
Additional information: 31-
0207
-
for OE number: 26905207,
27905207 - Manufacturer: DELLO AUTOMEGA
- for OE number: 027905207A
- Manufacturer: DELLO AUTOMEGA
- Construction Year from: 07.1991
-
Vehicle Identification Number (VIN) from: 24-
M- 105 001 - for OE number: 51905207
- Manufacturer: DELLO AUTOMEGA
- Manufacturer Restriction: System BOSCH
-
Resistor [Ohm]: 1,
000 - Material: Polyester
- Mounting Type: Plugged
- Support plate diameter [mm]: 10.2
- Name: STEJAGAJA
- Manufacturer: BERU
- Lisainfo: BEREVL134
- Additional information: BEREVL134
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Construction Year to: 02.1990
-
Vehicle Identification Number (VIN) to: 24-
L- 060000 - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Manufacturer Restriction: System BOSCH
- Mounting Type: Latching Connection
- Name: STEJAGAJA KAAN
- Manufacturer: BRM
- Construction Year from: 02.1990
- Construction Year to: 07.1991
-
Vehicle Identification Number (VIN) from: 24-
L- 060001 -
Vehicle Identification Number (VIN) to: 24-
M- 105000 - Name: STEJAGAJA KAAN
- Manufacturer: MAX
-
Lisainfo: 31-
0109 -
Additional information: 31-
0109
- Construction Year from: 07.1991
-
Vehicle Identification Number (VIN) from: 24-
M- 105001 - Manufacturer Restriction: BOSCH
- Name: STEJAGAJA KAAN
- Manufacturer: MAX
- Colour: black
- Weight [kg]: 0.031
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 055 905 207
- Manufacturer Restriction: BOSCH
- Weight [kg]: 0.094
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 02.1990
- Manufacturer: VEMO GERMANY
- Construction Year from: 02.1990
- Construction Year to: 07.1991
-
Vehicle Identification Number (VIN) from: 24-
L- 060 001 -
Vehicle Identification Number (VIN) to: 24-
M- 105 000 - Manufacturer Restriction: System BOSCH
- Material: Polyester
- Surface: Painted
-
Distributor/ Rotor: Connector Type,
saw teeth - Version: without shielding
- Name: STEJAGAJA KAAN
- Manufacturer: BERU
-
Construction Year to: 02.1990,
07.1991 -
Vehicle Identification Number (VIN) to: 24-
L- 060000, 24- M- 105000 - Block Separation:
-
Construction Year from: 02.1990,
07.1991 -
Vehicle Identification Number (VIN) from: 24-
L- 060001, 24- M- 105 001 - Resistor [kOhm]: 1
- Name: STEJAGAJA
- Manufacturer: BOS
- Construction Year from: 07.1991
-
Vehicle Identification Number (VIN) from: 24-
M- 105 001 - Manufacturer Restriction: System BOSCH
- Material: Polyester
- Mounting Type: Clipped
- Surface: inner painted
-
Distributor/ Rotor: Covered,
Connector Type, saw teeth - Name: STEJAGAJA KAAN
- Manufacturer: BERU
- Lisainfo: BERVK407S
- Additional information: BERVK407S
- Manufacturer Restriction: System BOSCH
- Material: Polyester
- Mounting Type: Clipped
- Surface: inner painted
-
Distributor/ Rotor: Covered,
Connector Type, saw teeth - Manufacturer: BERU BY DRIV
- Construction Year to: 02.1990
-
Vehicle Identification Number (VIN) to: 24-
L- 060000 - Number of Cylinders: 4
- Name: STEJAGAJA KAAN
- Manufacturer: BOS
- Construction Year from: 02.1990
- Construction Year to: 07.1991
-
Vehicle Identification Number (VIN) from: 24-
L- 060001 -
Vehicle Identification Number (VIN) to: 24-
M- 105000 - Number of Cylinders: 4
- Name: STEJAGAJA KAAN
- Manufacturer: BOS
- Construction Year from: 07.1991
-
Vehicle Identification Number (VIN) from: 24-
M- 105 001 - Number of Cylinders: 4
- Name: STEJAGAJA KAAN
- Manufacturer: BOS