• Engine Code: DSRB, DTSB
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Protective Cap/Bellow, shock absorber
• Additional information: Protective Cap/Bellow, shock absorber

• Fitting Position: Rear Axle
• General Information: protective pipe; rear
• Manufacturer: VIKA
• Quantity per packing unit: 2

• Engine Code: DSRB, DTSA, DTTC, DTTA, DTSB
• Axle: Rigid Axle
• Suspension: for vehicles with increased ground clearance
• Length [mm]: 266.4
• Width [mm]: 57
• Fitting Position: Rear Axle
• Weight [kg]: 0.04
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle both sides
• General Information: protective pipe
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle both sides
• General Information: protective pipe
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle both sides
• General Information: protective pipe
• Manufacturer: BORSEHUNG

• for PR number: 0N4
• Fitting Position: Rear Axle
• Axle: Independent wheel suspension
• Material: Thermoplast
• Height [mm]: 230
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: DSRB, DTSA, DTTC, DTTA, DTSB
• Axle: Rigid Axle
• Length [mm]: 269
• Material: Thermoplast
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.056
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle both sides
• General Information: dust boot
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle Left, Rear Axle Right
• Height [mm]: 230
• Material: Thermoplast
• Weight [g]: 72
• Diameter 1 [mm]: 59
• Diameter 2 [mm]: 66
• Name: IM 37969
• Manufacturer: ORIGINAL IMPERIUM

• Engine Code: DSRB, DTSA, DTTC, DTTA, DTSB
• Axle: Multi-link Axle
• Thickness [mm]: 230
• Material: Thermoplast
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.07
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: DTSB, DSRB, DTSA, DTTC, DTTA
• Construction Year from: 11.2020
• Suspension: for vehicles with electronic suspension control
• for PR number: G21
• Block Separation:
• Thickness [mm]: 172
• Material: Thermoplastic polyester elastomer
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.07
• Manufacturer: FEBI BILSTEIN
• Lisainfo: 46720 FEBI
• Additional information: 46720 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: A-AU-031
• Fitting Position: Rear Axle Left, Rear Axle Right
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Observe technical data:
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Axle: Four-Link Axle
• Manufacturer: DENCKERMANN AMORTYZATORY
• Lisainfo: DSF211G DKM
• Additional information: DSF211G DKM

Suspension: for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Diameter [mm]: 11, 38
• Manufacturer: KAVO

• Suspension: for vehicles with sports suspension
• Axle: Multi-link Axle
• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Vehicle Equipment: for vehicles without level control
• Shock Absorber System: Twin-Tube
• Quality class: PJ
• Name: Gas shock absorber

• Axle: Multi-link Axle
• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: AUTO-GH

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Axle: Rigid Axle
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Diameter [mm]: 45
• Length [mm]: 650
• Manufacturer: KAVO

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Diameter [mm]: 50
• max. length [mm]: 550
• Shock Absorber Mounting Type: Top pin

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Diameter [mm]: 45
• Length [mm]: 630
• Manufacturer: KAVO

• Fabrication Number: A-AU-030
• Fitting Position: Front Axle Left, Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Suspension Strut Outer Diameter [mm]: 50
• Length [mm]: 550
• Observe technical data:
• Replace in pairs only:
• Manufacturer: NTY

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Fabrication Number: A-AU-029
• Manufacturer: NTY

• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Manufacturer: ABAKUS LORO

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Pin
• Shock Absorber System: Twin-Tube
• Support plate diameter [mm]: 50
• Manufacturer: DENCKERMANN AMORTYZATORY

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control

• Check OE number:
• Block Separation:
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Axle: Four-Link Axle, Multi-link Axle
• Manufacturer: OPTIMAL ZAWIESZENIE

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control, for vehicles with sports suspension, for vehicles with increased ground clearance

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• General Information: shock absorber; rear; gas
• Manufacturer: VIKA

• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Length 2 [mm]: 548
• Suspension Strut Outer Diameter [mm]: 50
• Shock Absorber System: Twin-Tube
• for PR number: G07, G11, G16, G21, G24
• Quality class: PJ
• Name: Gas shock absorber

Suspension: for vehicles without electronic suspension control, for vehicles with bad road version, for vehicles with sports suspension, for vehicles with standard suspension

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• General Information: shock absorber; rear
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 50
• Length [mm]: 550
• Manufacturer: KAVO

• Fitting Position: Rear Axle
• Suspension: for vehicles without electronic suspension control
• Shock Absorber Type: Gas Pressure
• Sleeve Length [mm]: 59
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.93
• Bore Diameter [mm]: 25
• Observe technical data:
• Piston Rod Diameter [mm]: 12.4
• Article number of recommended accessories: MK503, PK424
• Packaging length [cm]: 50.5
• Packaging width [cm]: 6.5
• Packaging height [cm]: 6.5
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Axle: Rigid Axle
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Piston Rod Diameter [mm]: 13
• Shock absorber eyelet diameter [mm]: 45
• max. length [mm]: 650
• Manufacturer: KAYABA AMORTYZATORY
• Name: KY 3448025

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control General Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Thread Size: M14x1,5
• Piston Rod Length [mm]: 212
• Piston Rod Diameter [mm]: 22
• Article number of recommended accessories: F8-7131, F8-7809
• Suspension Strut Outer Diameter [mm]: 50
• Manufacturer: OPTIMAL ZAWIESZENIE

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• max. length [mm]: 705
• min. length [mm]: 445
• Standpipe Diameter [mm]: 45
• Piston Rod Diameter [mm]: 12
• Piston Rod Thread: M10X100
• Manufacturer: SNR AMORTYZATORY

• Axle: Multi-link Axle
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Piston Rod Diameter [mm]: 13
• Shock absorber eyelet diameter [mm]: 59
• max. length [mm]: 625
• Manufacturer: KAYABA AMORTYZATORY
• Name: KY 3448024
• Additional information: 3448024 KAYABA
• Lisainfo: 3448024 KAYABA

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control General Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Rear Axle
• Suspension: for vehicles without electronic suspension control
• for PR number: 1JC
• Check OE number:
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SEOV27X217A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Axle: Twist-beam Rear Axle
• Supplementary Article/Supplementary Info: with fastening ring
• Manufacturer: SACHS

• Suspension: for vehicles without electronic suspension control
• for combined PR number: G06+L28, G06+L29, G06+L30, G06+L31, G06+L32
• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 54
• Length 1 [mm]: 344
• Length 2 [mm]: 511
• Piston Rod Diameter [mm]: 25
• Quantity per axle: 1
• Observe technical data:
• Manufacturer: TRW AMORTYZATORY

• Axle: Rigid Axle
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Piston Rod Diameter [mm]: 11
• Shock absorber eyelet diameter [mm]: 45
• Manufacturer: KAYABA AMORTYZATORY
• Name: KY 3430023

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without increased ground clearance, for vehicles without electronic suspension control General Information: Please refer to the technical drawing in "Documents"

• Suspension: for vehicles with sports suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• max. length [mm]: 654
• min. length [mm]: 397
• Standpipe Diameter [mm]: 40
• Piston Rod Diameter [mm]: 12
• Piston Rod Thread: M10x100
• Manufacturer: SNR AMORTYZATORY

• Suspension: for vehicles without electronic suspension control
• Check OE number:
• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 51
• Length 1 [mm]: 344
• Length 2 [mm]: 511
• Piston Rod Diameter [mm]: 22
• Quantity per axle: 1
• Observe technical data:
• Manufacturer: TRW AMORTYZATORY

for combined PR number: G02+L12, G02+L13, G02+L14, G03+L23, G03+L24, G03+L25, G03+L26, G03+L27, G03+L28

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• General Information: shock absorber; front; gas
• Manufacturer: VIKA

• Axle: Multi-link Axle
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Length 2 [mm]: 415
• Name: KY 3448023
• Manufacturer: KYB

Suspension: for vehicles with standard suspension, for vehicles with increased ground clearance, for vehicles without sports suspension, for vehicles without electronic suspension control General Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Diameter [mm]: 55
• Manufacturer: KAVO PARTS

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Manufacturer: OYODO

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control

• Axle: Multi-link Axle
• Suspension: for vehicles with sports suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Length 1 [mm]: 399
• Length 2 [mm]: 625
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 19-230559

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-394366, GH-369964, GH-399961, GH-693610
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom Yoke
• Suspension Strut Outer Diameter [mm]: 50
• Manufacturer: AUTO-GH

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Block Separation:
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Thread Size: M14x1,5
• Piston Rod Length [mm]: 205
• Length 2 [mm]: 548
• for PR number: G02, G06, G25, G28, G29, G32
• Piston Rod Diameter [mm]: 25
• Suspension Strut Outer Diameter [mm]: 55
• Manufacturer: OPTIMAL ZAWIESZENIE

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control, for vehicles with sports suspension, for vehicles with increased ground clearance

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-394366, GH-369964, GH-399961, GH-693610
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Yoke
• Suspension Strut Outer Diameter [mm]: 55
• Manufacturer: AUTO-GH

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• max. length [mm]: 547
• min. length [mm]: 381
• Standpipe Diameter [mm]: 55
• Piston Rod Diameter [mm]: 25
• Piston Rod Thread: M14X150
• Manufacturer: SNR AMORTYZATORY

• Fitting Position: Front Axle
• Suspension: for vehicles without electronic suspension control
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4.43
• Bore Diameter [mm]: 32
• Observe technical data:
• Length 1 [mm]: 382
• Length 2 [mm]: 549
• Piston Rod Diameter [mm]: 22
• Article number of recommended accessories: MK411, PK422
• Packaging length [cm]: 56.8
• Packaging width [cm]: 17.2
• Packaging height [cm]: 17.2
• Housing diameter in clamping area [mm]: 50
• Manufacturer: MONROE
• Lisainfo: 742116SP MON
• Additional information: 742116SP MON

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Suspension Strut Outer Diameter [mm]: 55
• Manufacturer: KAYABA AMORTYZATORY
• Name: KY 3358015

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control General Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Rear Axle
• Suspension: for vehicles without electronic suspension control
• for PR number: 1JA, 1JC, UC7
• Check OE number:
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SEOV30/13X170A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Axle: Four-Link Axle
• Manufacturer: SACHS
• Name: SHS 318202
• Lisainfo: 318 202
• Additional information: 318 202

• Fitting Position: Rear Axle
• Suspension: for vehicles without electronic suspension control
• for PR number: UC7
• Check OE number:
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SEOV27/13X217A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Axle: Twist-beam Rear Axle
• Supplementary Article/Supplementary Info: without fastening ring
• Manufacturer: SACHS
• Name: SHS 318203

• Axle: Multi-link Axle
• Suspension: for vehicles with increased ground clearance
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Name: BI 19-297699
• Manufacturer: BILSTEIN
• Quality class: Q

• Fitting Position: Front Axle
• Outer Diameter [mm]: 50
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• General Information: gas-filled shock absorber; front
• Manufacturer: BORSEHUNG

• Axle: Multi-link Axle
• for PR number: 0K4
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 19-276977
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles with sports suspension

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Length 2 [mm]: 548
• for PR number: G07, G11, G16, G21, G24
• Housing diameter in clamping area [mm]: 50
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 22-230522
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control, for vehicles with bad road version Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Housing diameter in clamping area [mm]: 55
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 22-297716
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control, for vehicles with bad road version

• Fitting Position: Front Axle
• Suspension: for vehicles without electronic suspension control
• Check OE number:
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: ST36/25X167A
• Shock Absorber Mounting Type: Top pin
• Housing Diameter [mm]: 55
• Name: SHS 317330
• Manufacturer: SACHS

for OE number: 3Q0 413 031 AD, 3Q0 413 031 AE, 3Q0 413 031 AF, 3Q0 413 031 AL, 3Q0 413 031 AM, 3Q0 413 031 AN, 3Q0 413 031 AP, 3Q0 413 031 AQ, 3Q0 413 031 AR, 3Q0 413 031 AS, 3Q0 413 031 AT, 3Q0 413 031 BA, 3Q0 413 031 BM, 3Q0 413 031 BN, 3Q0 413 031 BP, 3Q0 413 031 BQ, 3Q0 413 031 BR, 3Q0 413 031 BS, 3Q0 413 031 CB, 3Q0 413 031 CC, 3Q0 413 031 CL, 3Q0 413 031 CM, 5Q0 413 031 CF, 5Q0 413 031 CG, 5Q0 413 031 CH, 5Q0 413 031 CJ, 5Q0 413 031 FN, 5Q0 413 031 GD, 5Q0 413 031 GE, 5Q0 413 031 GG, 5Q0 413 031 GL, 5Q0 413 031 HR, 5Q0 413 031 HS, 5Q0 413 031 HT, 5QA 413 031 AA, 5QA 413 031 AB, 5QF 413 031 AE, 5QF 413 031 AF, 5QF 413 031 AG, 5QF 413 031 AQ, 5QF 413 031 AR, 5QF 413 031 AS, 5QF 413 031 AT, 5QF 413 031 BB, 5QF 413 031 BE, 5QF 413 031 BL, 5QF 413 031 BR, 5QF 413 031 M, 5QF 413 031 N, 5QF 413 031 P

• Suspension: for vehicles without electronic suspension control
• for PR number: 0N1
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Axle: Rigid Axle
• Shock Absorber System: Monotube
• Name: BI 24-229883
• Manufacturer: BILSTEIN

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Top pin
• Length [mm]: 677
• Axle: Multi-link Axle
• for PR number: 0N4
• Shock Absorber System: Monotube
• Manufacturer: BILSTEIN
• Name: BI 24-229890

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Suspension: for vehicles without electronic suspension control
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Axle: Rigid Axle
• for PR number: 0N1
• Shock Absorber System: Monotube
• Name: BI 24-229920
• Manufacturer: BILSTEIN

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Length [mm]: 657
• Axle: Multi-link Axle
• for PR number: 0N4
• Shock Absorber System: Monotube
• Name: BI 24-229937
• Manufacturer: BILSTEIN

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Suspension: for vehicles without electronic suspension control
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• for PR number: G01, G07, G16, G21, G24
• Housing diameter in clamping area [mm]: 50
• Shock Absorber System: Single Tube Upside Down
• Manufacturer: BILSTEIN

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• for PR number: G02, G06, G25, G28, G29, G32
• Housing diameter in clamping area [mm]: 55
• Shock Absorber System: Single Tube Upside Down
• Manufacturer: BILSTEIN

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Suspension: for vehicles without electronic suspension control
• for PR number: 0N1, G01, G07, G16, G21, G24
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Length 2 [mm]: 548
• Housing diameter in clamping area [mm]: 50
• Shock Absorber System: Single Tube Upside Down
• Manufacturer: BILSTEIN
• Name: BI 35-229865
• Lisainfo: 35-229865
• Additional information: 35-229865

• for PR number: 0N1, G02, G06, G25, G28, G29, G32
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Length 2 [mm]: 548
• Housing diameter in clamping area [mm]: 55
• Shock Absorber System: Single Tube Upside Down
• Manufacturer: BILSTEIN

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"