• for PR number: 0N4
• Fitting Position: Rear Axle Left, Rear Axle Right, Upper
• Control/Trailing Arm Type: Control Arm
• Manufacturer: JP GROUP
• Lisainfo: Track control arm, upper, rear
• Additional information: Track control arm, upper, rear

• Fitting Position: Upper Front Axle, both sides
• Control/Trailing Arm Type: for control arm
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for PR number: 0N4
• Fitting Position: Rear Axle Right, Front
• Control/Trailing Arm Type: Trailing Arm
• Manufacturer: JP GROUP A/S
• Lisainfo: Track Control Arm
• Additional information: Track Control Arm

• Axle: Multi-link Axle
• Control/Trailing Arm Type: Trailing Arm
• Quantity Unit: Set
• Fitting Position: Rear Axle Right
• Length from [mm]: 384
• Material: Sheet Steel
• Rod/Strut: Push Rod
• Name: Control arm right
• Quality class: PJ

Lisainfo: "Tootja: SRL
A.A3 12-/VW GOLF VII
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A.A3 12-/VW GOLF VII
(kvaliteediklass: PJ)"

• Axle: Multi-link Axle
• Control/Trailing Arm Type: Trailing Arm
• Quantity Unit: Set
• Fitting Position: Rear Axle Left
• Length from [mm]: 384
• Material: Sheet Steel
• Rod/Strut: Push Rod
• Name: Control arm left
• Quality class: PJ

Lisainfo: "Tootja: SRL
A.A3 12-/VW GOLF VII
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A.A3 12-/VW GOLF VII
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Control/Trailing Arm Type: for control arm
• Thread Size: M12x1,5
• Number of bolts/screws: 2
• Length 1 [mm]: 82.5
• Length 2 [mm]: 97.5
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Control/Trailing Arm Type: Triangular Control Arm (CV)
• Fitting Position: Rear Axle, Front, Upper, Right
• for OE number: 5Q0505224D
• paired article number: 7476271
• Manufacturer: SASIC

• Control/Trailing Arm Type: Triangular Control Arm (CV)
• Fitting Position: Rear Axle, Front, Upper, Left
• for OE number: 5Q0505223D
• paired article number: 7476272
• Manufacturer: SASIC

• Control/Trailing Arm Type: Triangular Control Arm (CV)
• Fitting Position: Rear Axle, Rear, Upper
• for OE number: 5Q0505323D
• Manufacturer: SASIC
• Additional information: 7476277
• Lisainfo: 7476277

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle, Lower
• Length [mm]: 283
• Inner Diameter [mm]: 12
• Name: ALT 90535AL
• Manufacturer: ALTE AUTOMOTIVE

• for PR number: 0N4
• Control/Trailing Arm Type: Trailing Arm
• Fitting Position: Front, Rear Axle Right
• Material: Sheet Steel
• Supplementary Article/Info 2: with rubber mount
• Surface: Cathodic Painting, Black-painted
• paired article number: 116 568
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for PR number: 0N4
• Control/Trailing Arm Type: Trailing Arm
• Fitting Position: Rear Axle Left, Front
• Material: Sheet Steel
• Supplementary Article/Info 2: with rubber mount
• Surface: Cathodic Painting, Black-painted
• paired article number: 116 569
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear, Upper
• General Information: track control arm; rear upper
• Manufacturer: VIKA

• Engine Code: DSRB, DTSA, DTSB
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right
• Lisainfo: Track Control Arm
• Additional information: Track Control Arm

• Engine Code: DSRB, DTSA, DTSB
• Fitting Position: Front Axle Left
• Control/Trailing Arm Type: Control Arm
• Manufacturer: JP GROUP
• Lisainfo: Track Control Arm
• Additional information: Track Control Arm

• Control/Trailing Arm Type: Control Arm
• Base body material: Steel
• Fitting Position: Rear Axle Right, Rear Axle Left
• Net weight [kg]: 1,331
• Length [mm]: 306
• Diameter 1 [mm]: 12.2
• Diameter 2 [mm]: 14.2
• Supplementary Article/Info 2: without ball joint
• Name: OMG G41.4630/S
• Manufacturer: OMG

• for PR number: 0N4
• Control/Trailing Arm Type: Control Arm
• Control/Trailing Arm Design: Single Link
• Fitting Position: Rear Axle Left, Rear Axle Right, Upper
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: with rubber-metal mounts
• Material: Sheet Steel
• Alternative Repair Kit: 111 082 + 111 083
• Surface: Cathodic Painting, Black-painted
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Rear
• Control/Trailing Arm Type: Control Arm

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left, Centre
• Length [mm]: 384.5
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle
• Control/Trailing Arm Type: Control Arm
• General Information: axle guide; right rear
• Manufacturer: VIKA

• Fitting Position: Rear Axle both sides, Lower, Front
• Control/Trailing Arm Type: Control Arm
• Inner Diameter [mm]: 14.2, 12.2
• Length [mm]: 282.6
• Weight [kg]: 0.661
• Manufacturer: RTS

• Fitting Position: outer, Rear Axle, Upper
• Axle: Multi-link Axle
• for PR number: 0N4
• Material: Sheet Steel
• Control/Trailing Arm Type: Semi-Trailing Arm
• Supplementary Article/Info 2: without ball joint
• Length [mm]: 354
• Width [mm]: 150
• Height [mm]: 45
• Manufacturer: DELPHI

• Fitting Position: Rear Axle Left, Rear Axle Right, outer, Upper
• Axle: Multi-link Axle
• Supplementary Article/Info 2: with rubber mount
• Material: Steel
• Length [mm]: 306
• Control/Trailing Arm Type: Semi-Trailing Arm
• paired article number: 211477
• Weight [kg]: 1.3
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Right, Centre
• Length [mm]: 384.5
• Manufacturer: GSP ZAWIESZENIE

• Engine Code: DSRB, DTSA, DTTC, DTTA, DTSB
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left, Upper, Rear Axle Right
• Inner Diameter 1 [mm]: 12
• Inner Diameter 2 [mm]: 14
• Weight [kg]: 1.385
• Supplementary Article/Supplementary Info: with rubber mounts
• Observe service information:
• Manufacturer: FEBI BILSTEIN

Technical Information: Changed design. Bracket with OE no. 5Q0 614 167 B and 1K0 614 167 C (both not included) must be replaced at the same time. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Upper
• Material: Sheet Steel
• Supplementary Article/Info 2: with bearing
• Diameter 1 [mm]: 14
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Control/Trailing Arm Type: Control Arm
• Length [mm]: 304
• Inner Diameter 1 [mm]: 12
• Inner Diameter 2 [mm]: 14
• Manufacturer: TRW

Fitting Position: Rear Axle Left, Rear Axle Right, Upper, Front, outer

• Fitting Position: Rear Axle both sides, Upper
• Control/Trailing Arm Type: Control Arm
• Inner Diameter [mm]: 14, 12.1
• Length [mm]: 305.6
• Weight [kg]: 1.34
• Manufacturer: RTS

• Engine Code: DSRB, DTSA, DTTC, DTTA, DTSB
• paired article number: 103726
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left, Centre
• Weight [kg]: 1.5
• Supplementary Article/Info 2: with bearing
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: DSRB, DTSA, DTTC, DTTA, DTSB
• paired article number: 103725
• Material: Sheet Steel
• Control/Trailing Arm Type: Trailing Arm, Control Arm
• Fitting Position: Rear Axle Right, Centre
• Weight [kg]: 1.5
• Supplementary Article/Info 2: with bearing
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: outer, Rear Axle Left, Lower
• Axle: Multi-link Axle
• for PR number: 0N4
• Material: Sheet Steel
• paired article number: TC3844
• Control/Trailing Arm Type: Trailing Arm
• Supplementary Article/Info 2: without ball joint
• Length [mm]: 449
• Width [mm]: 214
• Height [mm]: 64
• Name: DE TC3843
• Manufacturer: DELPHI

• Fitting Position: outer, Rear Axle Right, Lower
• Axle: Multi-link Axle
• for PR number: 0N4
• Material: Sheet Steel
• paired article number: TC3843
• Control/Trailing Arm Type: Trailing Arm
• Supplementary Article/Info 2: without ball joint
• Length [mm]: 449
• Width [mm]: 214
• Height [mm]: 64
• Name: DE TC3844
• Manufacturer: DELPHI

• Weight [kg]: 1.583
• Control/Trailing Arm Type: Control Arm
• Diameter 1 [mm]: 12.1
• Length [mm]: 375.3
• Fitting Position: Rear Axle Left, Front
• Manufacturer: RTS

• Fitting Position: outer, Front, Rear Axle, Lower
• Axle: Multi-link Axle
• for PR number: 0N4
• Material: Sheet Steel
• Control/Trailing Arm Type: Semi-Trailing Arm
• Supplementary Article/Info 2: without ball joint
• Length [mm]: 450
• Width [mm]: 450
• Name: DE TC4687
• Manufacturer: DELPHI

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Left
• Rod/Strut: Coupling Rod
• General Information: rear trailing arm; left
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle, Lower Right, outer, Right, Lower
• Supplementary Article/Info 2: with ball joint
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fabrication Number: ZWD-AU-019
• paired article number: ZWD-AU-018
• Manufacturer: NTY

• Fitting Position: Lower Left, Front Axle, outer, Left, Lower
• Supplementary Article/Info 2: with ball joint
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fabrication Number: ZWD-AU-018
• paired article number: ZWD-AU-019
• Manufacturer: NTY

• Fitting Position: Front Axle
• Control/Trailing Arm Type: Control Arm
• General Information: axle guide; left rear
• Manufacturer: VIKA

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Right
• Rod/Strut: Coupling Rod
• General Information: rear trailing arm; right
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle Left, Lower
• Control/Trailing Arm Type: Control Arm
• paired article number: 1140112980

• Fitting Position: Front Axle Right
• Control/Trailing Arm Type: Control Arm
• paired article number: 1140112970

• Engine Code: DSRB, DTSA, DTTC, DTTA, DTSB
• paired article number: 192996
• External Thread Size: M12 x 1,5
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Right, Centre
• Weight [kg]: 1.692
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: with bearing
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: DSRB, DTSA, DTTC, DTTA, DTSB
• paired article number: 192997
• External Thread Size: M12 x 1,25
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left, Centre
• Weight [kg]: 1.692
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: with bearing
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle, both sides, Front, Upper
• Article number of recommended accessories: 38910 01
• Name: LMI 3804101
• Manufacturer: LEMFÖRDER

• Fitting Position: Front Axle, Lower Left
• Length [mm]: 339
• Supplementary Article/Supplementary Info: with bush
• Control/Trailing Arm Type: Control Arm
• General Information: Attachment_Method:Bolting Type
• Manufacturer: CTR

• Fitting Position: Front Axle, Lower Right
• Length [mm]: 339
• Supplementary Article/Supplementary Info: with bush
• Control/Trailing Arm Type: Control Arm
• General Information: Attachment_Method:Bolting Type
• Manufacturer: CTR

• Control/Trailing Arm Type: Control Arm
• Control/Trailing Arm Design: Triangular Control Arm
• Fitting Position: Front Axle Right
• Material: Sheet Steel
• Supplementary Article/Supplementary Info: with rubber-metal mounts
• Supplementary Article/Info 2: without ball joint
• Surface: Cathodic Painting, Black-painted
• paired article number: 116 564
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left
• Weight [kg]: 3.69
• Material: Sheet Steel
• paired article number: D120762
• Manufacturer: DENCKERMANN FILTRY

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right
• Weight [kg]: 3.65
• Material: Sheet Steel
• paired article number: D120761
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Front Axle Left, Lower
• for OE number: 5Q0407151J
• Required quantity: 1
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Manufacturer: FAI

• Control/Trailing Arm Type: Triangular Control Arm (CV)
• Fitting Position: Front Axle Left, Lower
• for OE number: 5WA407151A
• paired article number: 7476281
• Manufacturer: SASIC

• Control/Trailing Arm Type: Triangular Control Arm (CV)
• Fitting Position: Front Axle Right, Lower
• for OE number: 5WA407152A
• paired article number: 7476280
• Manufacturer: SASIC

• Engine Code: DSRB, DTSA, DTTC, DTTA, DTSB
• paired article number: 106143
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left
• Weight [kg]: 3.16
• Supplementary Article/Supplementary Info: with rubber mounts
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right
• Inner Diameter [mm]: 12, 13
• paired article number: 88887AL
• Name: ALT 88888AL
• Manufacturer: ALTE AUTOMOTIVE

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left
• Inner Diameter [mm]: 12, 13
• paired article number: 88888AL
• Name: ALT 88887AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle Left, outer, Left, Lower
• for PR number: 4P0
• Material: Sheet Steel
• paired article number: TC2864
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: without ball joint
• Length [mm]: 444
• Width [mm]: 423
• Height [mm]: 63
• Name: DE TC2863
• Manufacturer: DELPHI

• Fitting Position: Front Axle Right, outer, Right, Lower
• for PR number: 4P0
• Material: Sheet Steel
• paired article number: TC2863
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: without ball joint
• Length [mm]: 444
• Width [mm]: 423
• Height [mm]: 63
• Name: DE TC2864
• Manufacturer: DELPHI

• Fitting Position: Lower, Front Axle Right
• paired article number: S062976
• Control/Trailing Arm Type: Control Arm
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Lower, Front Axle Left
• paired article number: S062977
• Control/Trailing Arm Type: Control Arm
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: in front of axle, Rear Axle Left, outer, Lower
• Axle: Multi-link Axle
• Supplementary Article/Info 2: with rubber mount, without ball joint
• Material: Steel
• Length [mm]: 375
• Control/Trailing Arm Type: Trailing Arm
• as standard:
• paired article number: 211715
• Weight [kg]: 1.64
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Left
• Control/Trailing Arm Type: Control Arm
• Material: Sheet Steel
• Supplementary Article/Info 2: without ball joint
• paired article number: 821 1149 10
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Front Axle Right
• Control/Trailing Arm Type: Control Arm
• Material: Sheet Steel
• Supplementary Article/Info 2: without ball joint
• paired article number: 821 1148 10
• SVHC: No SVHC present!
• Name: LU 821114910
• Manufacturer: FAG

• Engine Code: DSRB, DTSA, DTTC, DTTA, DTSB
• paired article number: 106142
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right
• Weight [kg]: 3.16
• Supplementary Article/Supplementary Info: with rubber mounts
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Control/Trailing Arm Type: Control Arm
• Base body material: Steel
• Fitting Position: Front Axle Right
• Net weight [kg]: 3.69
• paired article number: G40.8117/C
• Supplementary Article/Info 2: with ball joint
• Name: OMG G40.8118/C
• Manufacturer: OMG

• Control/Trailing Arm Type: Control Arm
• Base body material: Steel
• Fitting Position: Front Axle Left
• Net weight [kg]: 3.69
• paired article number: G40.8118/C
• Supplementary Article/Info 2: with ball joint
• Name: OMG G40.8117/C
• Manufacturer: OMG

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left
• Diameter 1 [mm]: 54
• Diameter 2 [mm]: 50
• Inner Diameter [mm]: 12
• Material: Sheet Steel
• paired article number: JTC1700
• Manufacturer: TRW ZAWIESZENIE

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right
• Diameter 1 [mm]: 54
• Diameter 2 [mm]: 50
• Inner Diameter [mm]: 12
• Material: Sheet Steel
• paired article number: JTC1699
• Manufacturer: TRW ZAWIESZENIE

• Fitting Position: Front Axle Left, outer, Left, Lower
• for PR number: 4P0
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 455
• Width [mm]: 398
• Height [mm]: 75
• Name: DE TC4378
• Manufacturer: DELPHI

• Fitting Position: Front Axle Right, outer, Right, Lower
• for PR number: 4P0
• Material: Sheet Steel
• paired article number: TC4378
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 455
• Width [mm]: 398
• Height [mm]: 75
• Name: DE TC4379
• Manufacturer: DELPHI

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle, Left, Front, outer
• Material: Sheet Steel
• paired article number: 42493 01
• Article number of recommended accessories: 44089 01
• Manufacturer: LEMFÖRDER

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle, Right, Front, outer
• Material: Sheet Steel
• paired article number: 42492 01
• Article number of recommended accessories: 44089 01
• Manufacturer: LEMFORDER

• Control/Trailing Arm Type: Triangular Control Arm (CV)
• Fitting Position: Front Axle Left, Lower
• Supplementary Article/Info 2: with ball joint
• Diameter 1 [mm]: 15
• Diameter 2 [mm]: 19
• for OE number: 5WA407151A+, 5WA407365
• paired article number: 7476542
• Manufacturer: SASIC

• Control/Trailing Arm Type: Triangular Control Arm (CV)
• Fitting Position: Front Axle Right, Lower
• Supplementary Article/Info 2: with ball joint
• Diameter 1 [mm]: 15
• Diameter 2 [mm]: 19
• for OE number: 5WA407152A+, 5WA407366
• paired article number: 7476541
• Manufacturer: SASIC

• Control/Trailing Arm Type: Triangular Control Arm (CV)
• Fitting Position: Front Axle Right, Lower
• Supplementary Article/Info 2: with ball joint
• Diameter 1 [mm]: 15
• Diameter 2 [mm]: 21
• for OE number: 5WA407152A+, 3C0407366B
• paired article number: 7476539
• Manufacturer: SASIC

• Control/Trailing Arm Type: Triangular Control Arm (CV)
• Fitting Position: Front Axle Left, Lower
• Supplementary Article/Info 2: with ball joint
• Diameter 1 [mm]: 15
• Diameter 2 [mm]: 21
• for OE number: 5WA407151A+, 3C0407365B
• paired article number: 7476540
• Manufacturer: SASIC

• for PR number: 4P0
• Fitting Position: Front Axle, Right
• paired article number: 44608 01
• Control/Trailing Arm Type: Control Arm
• Manufacturer: LEMFORDER

• for PR number: 4P0
• Fitting Position: Front Axle, Left
• paired article number: 44609 01
• Control/Trailing Arm Type: Control Arm
• Manufacturer: LEMFORDER

• Fitting Position: Rear Axle, Left, Lower
• Required quantity: 1
• Control/Trailing Arm Type: Trailing Arm
• Supplementary Article/Info 2: with rubber mount
• paired article number: L29B61
• Manufacturer: MONROE

• Fitting Position: Rear Axle Right, Front, outer
• for PR number: 0N4
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with rubber mount
• paired article number: 821 1199 10
• SVHC: No SVHC present!
• Manufacturer: FAG-ELEMENTY ZAWIESZENIA

• Fitting Position: Rear Axle Left, Front, outer
• for PR number: 0N4
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with rubber mount
• paired article number: 821 1200 10
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Front Axle, Left
• paired article number: 44611 01
• Control/Trailing Arm Type: Control Arm
• Name: LMI 4461001
• Manufacturer: LEMFÖRDER

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left, Rear Axle Right, Rear, Lower
• Article number of recommended accessories: 45278 01
• Name: LMI 4354801
• Manufacturer: LEMFÖRDER

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right
• Diameter 1 [mm]: 54
• Diameter 2 [mm]: 50
• Inner Diameter [mm]: 12
• Material: Sheet Steel
• paired article number: 38633 01
• Manufacturer: LEMFÖRDER

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left
• Supplementary Article/Info 2: with ball joint, with rubber mount
• paired article number: 58082802
• Guarantee: 3 years guarantee or up to 75,000km
• Manufacturer: METZGER