• Materjal: Plastik
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Jämedus/Tugevus (mm): 3,5
• Siseläbimõõt [mm]: 19,5
• Materjal: NBR (Nitril-Butadien-Kautschuk)
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Cylinder Head
• Siseläbimõõt [mm]: 36
• Välisläbimõõt [mm]: 42,3
• Jämedus/Tugevus (mm): 3,15
• Materjal: EPDM (Etüleen-Propüleen-Dieen-Kautsuk)
• Kuju: O-rõngas
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Left
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Identification Number (VIN) to: 3A-V-300 000
• Läbimõõt [mm]: 20
• Manufacturer: DELLO AUTOMEGA

• Quantity: 1
• Vehicle Identification Number (VIN) from: 3A-SB015 001, 3A-SD190 001, 3A-SE203 001
• Material: Plastic
• Weight [kg]: 0.015
• Required quantity: 1
• General Information: retaining spring
• Manufacturer: VIKA

• Name: SULGURKORK, JAHUTUSVEDELIKUFLANTS
• Manufacturer: MAX

• Jämedus/Tugevus (mm): 3,5
• Siseläbimõõt [mm]: 19,5
• Materjal: NBR (Nitril-Butadien-Kautschuk)
• Kaal (kg): 0,003
• Name: TIHEND,JAHUTUSVEDEDELIKUFLANTS
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Materjal: NBR (Nitril-Butadien-Kautschuk)
• Installatsiooni pool: mootoripoolne
• Rõngastihendi läbimõõt (mm): 36
• Jämedus/Tugevus (mm): 3,15
• Pealispind: reljeefne
• Name: TIHEND,JAHUTUSVEDEDELIKUFLANTS
• Manufacturer: HAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Materjal: Plastik
• Piirangutega toode/piirangu info: koos vedruga, koos tihendiga
• Täiskomplekt:
• OE-numbri jaoks: 357198140S
• Manufacturer: DELLO AUTOMEGA

• Piirangutega toode/piirangu info: koos vedruga, koos tihendiga
• Kaal (kg): 0,063
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Piirangutega toode/piirangu info: koos lisadega
• Name: SULGURKORK, JAHUTUSVEDELIKUFLANTS
• Manufacturer: MAX

• Materjal: Plastik
• Kaal (kg): 0,015
• Name: KINNITUSVEDRU, JAHUTUSVEDELIKUFLANTS-SULGURKORK
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Cylinder Head
• Siseläbimõõt [mm]: 36
• Välisläbimõõt [mm]: 42,3
• Jämedus/Tugevus (mm): 3,15
• Materjal: EPDM (Etüleen-Propüleen-Dieen-Kautsuk)
• Kuju: O-rõngas
• Name: Tihend,jahutusvededelikuflants
• Manufacturer: ELR
• Additional information: EL828963
• Lisainfo: EL828963

• Transmission Type: Manual Transmission
• Housing material: Plastic
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• for OE number: 026121144E
• Manufacturer: DELLO AUTOMEGA

• Transmission Type: Manual Transmission
• Fitting Position: Cylinder Head
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Transmission Type: Manual Transmission
• Material: Plastic
• Supplementary Article/Info 2: with seal ring
• Fitting Position: transmission sided, Cylinder Head
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: Automatic Transmission
• Housing material: Plastic
• Number of inlets/outlets: 1
• Supplementary Article/Info 2: with seal ring
• for OE number: 026121144F
• Manufacturer: DELLO AUTOMEGA

Manufacturer: 3RG

• Fitting Position: Cylinder Head, transmission sided
• Material: Plastic
• Supplementary Article/Supplementary Info: with seal
• Fabrication Number: CTM-VW-007

• Transmission Type: Manual Transmission
• Material: Plastic
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MAX

• Housing material: Plastic
• Number of inlets/outlets: 1
• Supplementary Article/Info 2: with seal ring
• for OE number: 037121121A
• Manufacturer: DELLO AUTOMEGA

• Vehicle Equipment: for vehicles with automatic climate control
• Forward- /Backflow: for foreflow
• Hose diameter [mm]: 20
• Shape: T Shape (T Piece)
• Angle [°]: 90
• Consult accessories list for recommended additional repairs:
• Material: GRP (Glass fibre Reinforced Plastic)
• Heating/Cooling: with thermal switch connector
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: Manual Transmission
• Material: Plastic
• Diameter 1 [mm]: 25
• Manufacturer: 3RG

• Transmission Type: Automatic Transmission
• Number of circuits: 2
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Vehicle Equipment: for vehicles with automatic climate control
• Forward- /Backflow: for foreflow
• Heating/Cooling: with thermal switch connector
• Material: GRP (Glass fibre Reinforced Plastic)
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MAX

• Transmission Type: Automatic Transmission
• Supplementary Article/Supplementary Info: with seal
• Material: Plastic
• Fitting Position: transmission sided, Cylinder Head
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: lateral installation
• Weight [kg]: 0.041
• Material: Plastic
• Supplementary Article/Supplementary Info: with seal
• Weight [g]: 41
• Manufacturer: METALCAUCHO

• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Transmission Type: Automatic Transmission
• Material: Plastic
• Fitting Position: Cylinder Head
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MAX

• Full Set:
• Manufacturer: METZGER

• Fitting Position: Water Pump
• Material: Plastic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Fabrication Number: CTM-VW-014

• Cooling Hose: from thermostat to radiator
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Cooling Hose: from thermostat to radiator
• Manufacturer: DELLO AUTOMEGA

• Jämedus/Tugevus (mm): 3,15
• Siseläbimõõt [mm]: 36
• Materjal: Kumm
• Kaal (kg): 0,003
• Name: TIHEND,JAHUTUSVEDEDELIKUFLANTS
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Supplementary Info: with gaskets/seals
• Material: Plastic
• Fitting Position: Water Pump
• Manufacturer: TOPRAN HANS PRIES
• Lisainfo: 107 635 HP
• Additional information: 107 635 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Material: Plastic
• Weight [kg]: 0.1
• Required quantity: 1
• General Information: pipe union
• Manufacturer: VIKA

• for OE number: 028 121 132 A
• Material: Plastic
• Fabrication Number: CTM-VW-008

• Kaal (kg): 0,038
• Name: SULGURKORK, JAHUTUSVEDELIKUFLANTS
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Fitting Position: Left, Cylinder Head, transmission sided
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for OE number: 026 121 144 E
• Manufacturer: TRUCKTEC AUTOMOTIVE

• for OE number: 037121145
• Material: Plastic
• Supplementary Article/Supplementary Info: with seal
• Weight [g]: 45
• Supplementary Article/Info 2: without thermostat
• Name: IM 90186
• Manufacturer: ORIGINAL IMPERIUM

• Material: Plastic
• Fitting Position: Front, Cylinder Head
• Supplementary Article/Info 2: with seal ring
• Heating/Cooling: with thermal switch connector
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 037121121A
• Manufacturer: NRF
• Additional information: 775047 NRF
• Lisainfo: 775047 NRF

• Diameter [mm]: 25
• Manufacturer: MEAT&DORIA

• Material: Plastic
• Number of mounting bores: 2
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MAX

• Material: Plastic
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MAX

• Fitting Position: Cylinder Head, transmission sided
• Manufacturer: NRF

• Required quantity: 1
• Supplementary Article/Supplementary Info: without gasket/seal
• Weight [g]: 55
• Supplementary Article/Info 2: without thermostat
• Name: IM 90353
• Manufacturer: ORIGINAL IMPERIUM

• Transmission Type: Automatic Transmission
• Fitting Position: Cylinder Head, Flywheel side
• Manufacturer: VERNET

• for OE number: VX028121133BVX
• Material: Plastic
• Supplementary Article/Supplementary Info: with seal
• Weight [g]: 107
• Supplementary Article/Info 2: without thermostat
• Name: IM 90222
• Manufacturer: ORIGINAL IMPERIUM

• Number of flange connections: 1
• Fitting Position: Cylinder Head
• Manufacturer: NRF

• Housing Type: Synthetic Material Housing
• Supplementary Article/Supplementary Info: without gasket/seal
• Manufacturer: VERNET
• Additional information: WF0036 VERNET
• Lisainfo: WF0036 VERNET

• for OE number: 137131145B
• Material: Plastic
• Supplementary Article/Supplementary Info: with seal
• Weight [g]: 43
• Supplementary Article/Info 2: without thermostat
• Name: IM 90188
• Manufacturer: ORIGINAL IMPERIUM

• Transmission Type: Automatic Transmission
• Weight [kg]: 0.05
• Supplementary Article/Supplementary Info: with seal
• Fitting Position: Cylinder Head
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.155
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Material: Plastic
• Weight [kg]: 0.065
• for OE number: 037 121 121 A
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Left
• Supplementary Article/Supplementary Info: with seal
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MEY

• Fitting Position: Left, Cylinder Head, Flywheel side
• Manufacturer: VERNET

• Number of flange connections: 4
• Manufacturer: BGA

• Weight [kg]: 0.14
• Material: Plastic
• Weight [g]: 140
• Manufacturer: METALCAUCHO

• Transmission Type: Manual Transmission
• Material: Plastic
• Fitting Position: Cylinder Head
• Weight [kg]: 0.1
• for OE number: 026 121 144 E
• Supplementary Article/Supplementary Info: with seal
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Automatic Transmission
• Supplementary Article/Supplementary Info: with seal
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MEY

• Transmission Type: Manual Transmission
• Material: Plastic
• Fitting Position: Cylinder Head
• Weight [kg]: 0.1
• for OE number: 026 121 144 E
• Supplementary Article/Supplementary Info: with seal
• Name: SW 99 91 2410
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.121
• Material: Plastic
• Supplementary Article/Supplementary Info: with seal
• Quantity Unit: Set
• Weight [g]: 121
• Manufacturer: METALCAUCHO

• Material: Plastic
• Weight [kg]: 0.11
• for OE number: 028 121 132 A
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Cylinder Head
• Cooling Hose: from engine to engine cooler
• for OE number: 028121132A
• Manufacturer: NRF

• Required quantity: 1
• Fitting Position: Left, Cylinder Head, lateral installation
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Left, Cylinder Head, Lateral Mounting
• Number of circuits: 4
• Cooling Hose: from engine to engine cooler
• Manufacturer: VERNET

• Fitting Position: Left
• Supplementary Article/Supplementary Info: with seal
• Shape: angled
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MEY
• Lisainfo: 1001211053
• Additional information: 1001211053

• Material: Plastic
• Weight [kg]: 0.11
• for OE number: 028 121 132 A
• Manufacturer: SWAG
• Name: SW 30 91 4504

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.