• Inner Diameter [mm]: 43.95
• Manufacturer: JP GROUP
• Lisainfo: Seal, turbo air hose
• Additional information: Seal, turbo air hose

• Braking/Driving Dynamics: for vehicles without ABS
• for PR number: D3X, MF7, MS7, MS9
• Inner Diameter [mm]: 58.5
• Name: Rongastihend,ohulaadevoolik
• Manufacturer: MAX

• Braking/Driving Dynamics: for vehicles without ABS
• Name: Rongastihend,ohulaadevoolik
• Manufacturer: MAX

• Braking/Driving Dynamics: for vehicles without ABS
• for PR number: D3X, MF7, MS7, MS9
• Inner Diameter [mm]: 61.8
• Name: Rongastihend,ohulaadevoolik
• Manufacturer: MAX

• for PR number: D3W, D3X, MF7, MS7, MS9
• Weight [kg]: 0.003
• Packaging length [cm]: 5.3
• Packaging width [cm]: 5.3
• Packaging height [cm]: 0.5
• Inner Diameter [mm]: 44
• Outer Diameter [mm]: 53
• Manufacturer: FEBEST

• Inner Diameter [mm]: 57.85
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
• Name: DRM 01815

• Material: FPM (fluoride rubber)
• Inner Diameter [mm]: 61.9
• Manufacturer: ELRING

• for PR number: D3W, D3X, MF7, MS7, MS9
• Weight [kg]: 0.005
• Inner Diameter [mm]: 58
• Packaging length [cm]: 6.9
• Packaging width [cm]: 6.9
• Packaging height [cm]: 0.5
• Manufacturer: FEBEST

• Fitting Position: Charge Air Cooler
• Manufacturer: DRM

Name: USZCZELKA PRZEWODU CHODNICY POWIETRZA VW GOLF 2.0TDI 07-

• for OE number: 3C0145117J
• Weight [g]: 11
• Name: IM 20280
• Manufacturer: ORIGINAL IMPERIUM

• Inner Diameter [mm]: 61.9
• Shape: Ring Form
• Material: FPM (fluoride rubber)
• Always compare old and new part (in particular OE No.):
• Alternative Repair Kit: 2400113, 2400121
• Manufacturer: METZGER

• Inner Diameter [mm]: 57.85
• Shape: Ring Form
• Material: FPM (fluoride rubber)
• Always compare old and new part (in particular OE No.):
• Alternative Repair Kit: 2400113, 2400118, 2400119, 2400129, 2400277
• Manufacturer: METZGER

• for OE number: 3C0145117H
• Weight [g]: 13
• Name: IM 20281
• Manufacturer: ORIGINAL IMPERIUM

• for PR number: D3W, D3X, MF7, MS7, MS9
• Weight [kg]: 0.005
• Inner Diameter [mm]: 62
• Packaging length [cm]: 6.9
• Packaging width [cm]: 6.9
• Packaging height [cm]: 0.5
• Manufacturer: FEBEST

• Quantity per packing unit: 10
• Diameter [mm]: 56
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Right
• Material: Rubber with fabric lining
• Connection Diameter (pressure side) [mm]: 49
• Connection Diameter (suction side) [mm]: 49
• Fabrication Number: GPP-VW-023
• Manufacturer: NTY

• for OE number: 1K0 145 832 B
• Material: Rubber with fabric lining
• Connection Diameter (pressure side) [mm]: 59
• Connection Diameter (suction side) [mm]: 59
• Fabrication Number: GPP-VW-021
• Manufacturer: NTY
• Name: NTY GPP-VW-021

• Fitting Position: Right, Upper
• Lisainfo: Charger Intake Hose
• Additional information: Charger Intake Hose

• Turbocharger Line: Cold Side, Charge air cooler to piping
• Hose Length [mm]: 320
• Inner Diameter 1 [mm]: 48
• Inner Diameter 2 [mm]: 48
• Manufacturer: DENCKERMANN TURBO PRZEWODY

• for OE number: 1T0 145790 B
• Fitting Position: Charge Air Cooler
• Length [mm]: 200
• Outer Diameter [mm]: 51
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: MAX

• Turbocharger Line: Hot Side, Piping to charge air cooler
• Hose Length [mm]: 350
• Inner Diameter 1 [mm]: 56
• Inner Diameter 2 [mm]: 52
• Manufacturer: DENCKERMANN FILTRY

• Quantity per packing unit: 5
• Material: FPM (fluoride rubber)
• Shape: O-Ring
• Inner Diameter [mm]: 62
• Thickness [mm]: 4.3
• Quantity Unit: Packing Unit

• for OE number: 1T0145790B
• Name: Laadimisohu voolik
• Manufacturer: NRF

• General Information: pressure hose
• Manufacturer: VIKA

• Material: Rubber with fabric lining
• Connection Diameter (pressure side) [mm]: 61
• Connection Diameter (suction side) [mm]: 61
• Fabrication Number: GPP-VW-022
• Manufacturer: NTY

• for OE number: 1K0 145832 B
• Fitting Position: Charge Air Cooler, Lower
• Length [mm]: 350
• Outer Diameter 1 [mm]: 69
• Outer Diameter 2 [mm]: 66
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: MAX

• Turbocharger Line: Cold Side, Piping to engine block
• Material: AEM (Ethylene Acrylate Rubber)
• Colour: black
• Hose Length [mm]: 160
• Inner Diameter 1 [mm]: 38
• Inner Diameter 2 [mm]: 38
• Observe broschure:
• Name: Laadimisohu voolik
• Manufacturer: GAT

• Fitting Position: Left, Lower
• Manufacturer: JP GROUP
• Lisainfo: Charger Intake Hose
• Additional information: Charger Intake Hose

• Length [mm]: 200
• for OE number: 1T0145790B
• Fitting Position: Charge Air Cooler
• Outer Diameter [mm]: 51
• Supplementary Article/Info 2: without clamps
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• Fitting Position: Left, Upper
• Lisainfo: Charger Intake Hose
• Additional information: Charger Intake Hose

• Fitting Position: Right, Upper
• Manufacturer: JP GROUP
• Lisainfo: Charger Intake Hose
• Additional information: Charger Intake Hose

• Fitting Position: Right Front
• Cooling Hose: Piping to charge air cooler, Hot Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.5
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV015

• Fitting Position: Charge Air Cooler, Outlet
• for OE number: 1K0145832B
• Name: Laadimisohu voolik
• Manufacturer: NRF

• Production date to: 12/05
• for OE number: 1T0145790B
• Manufacturer: SASIC

• Material: Rubber with fabric lining
• Fitting Position: Left
• General Information: pressure hose
• Manufacturer: VIKA

• Weight [kg]: 0.44
• Required quantity: 1
• Outer Diameter [mm]: 69
• Outer Diameter 1 [mm]: 65
• General Information: pressure hose
• Manufacturer: VIKA

• Fitting Position: Charge Air Cooler
• Manufacturer: NRF

• Turbocharger Line: Piping to charge air cooler
• Material: ACM (Polyacrylate)
• Fitting Position: Charge Air Cooler, Left
• Weight [kg]: 0.43
• Supplementary Article/Info 2: with quick couplers
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: FEB
• Additional information: FE102667
• Lisainfo: FE102667

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• General Information: pressure hose
• Manufacturer: VIKA

• Turbocharger Line: Cold Side, Charge air cooler to piping
• Material: Silicone
• Colour: black
• Hose Length [mm]: 320
• Inner Diameter 1 [mm]: 55
• Inner Diameter 2 [mm]: 52
• Observe broschure:
• Name: Laadimisohu voolik
• Manufacturer: GAT

• Turbocharger Line: Cold Side, Charge air cooler to piping
• Material: Silicone
• Supplementary Article/Info 2: with hose clip
• Colour: black
• Hose Length [mm]: 320
• Inner Diameter 1 [mm]: 48
• Inner Diameter 2 [mm]: 48
• Observe broschure:
• Manufacturer: GATES-PRZEWODY

• Fitting Position: Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Left
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for OE number: 1K0145838N
• Name: Laadimisohu voolik
• Manufacturer: NRF

• Production date to: 12/05
• Fitting Position: Charge Air Cooler, Outlet
• for OE number: 1K0145832B
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• Turbocharger Line: Hot Side, Piping to charge air cooler
• Material: Polychloroprene (Neoprene)
• Colour: black
• Hose Length [mm]: 350
• Inner Diameter 1 [mm]: 56
• Inner Diameter 2 [mm]: 52
• Observe broschure:
• Name: Laadimisohu voolik
• Manufacturer: GAT

• Production date to: 12/05
• Fitting Position: Charge Air Cooler, Inlet
• for OE number: 1K0145834L
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• for OE number: 1K0145834L
• Fitting Position: Inlet
• Weight [g]: 512
• Plug connector manufacturer: HENN
• Length [mm]: 321
• Inner Diameter 1 [mm]: 56
• Inner Diameter 2 [mm]: 52
• Name: IM 221914
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Right, Lower, Front
• Connector type: OE PUSH CONNECTOR
• Colour: black
• Material: Polychloroprene (Neoprene)
• Inner Diameter 1 [mm]: 56
• Inner Diameter 2 [mm]: 52
• Manufacturer: BORG & BECK

• Outer Diameter [mm]: 69
• Turbocharger Line: Turbocharger to charge air cooler
• Fitting Position: Charge Air Cooler, Right
• Outer Diameter 1 [mm]: 65
• Weight [kg]: 0.44
• for OE number: 1K0 145 832 B
• Supplementary Article/Info 2: with quick couplers
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: FEB
• Additional information: FE49361
• Lisainfo: FE49361

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Turbocharger Line: Hot Side, Turbocharger to piping
• Material: PE (Polyethylene)
• Colour: black
• Hose Length [mm]: 430
• Inner Diameter 1 [mm]: 52
• Inner Diameter 2 [mm]: 52
• Observe broschure:
• Name: Laadimisohu voolik
• Manufacturer: GAT

• Fitting Position: Left
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Turbocharger Line: Hot Side, Turbocharger to piping
• Material: PE (Polyethylene)
• Supplementary Article/Info 2: with hose clip
• Colour: black
• Hose Length [mm]: 430
• Inner Diameter 1 [mm]: 52
• Inner Diameter 2 [mm]: 52
• Observe broschure:
• Manufacturer: GATES

• Connection Diameter (pressure side) [mm]: 59
• Connection Diameter (suction side) [mm]: 59
• for OE number: 1K0 145 832 B
• Material: Rubber with fabric lining
• Compression ring material: Stainless Steel
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Turbocharger Line: Hot Side, Piping to charge air cooler
• Connection Diameter (pressure side) [mm]: 55
• Connection Diameter (suction side) [mm]: 55
• Material: Rubber with fabric lining
• for OE number: 1K0 145 762 BA
• Compression ring material: Stainless Steel
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Charge Air Cooler, Upper, Right
• Supplementary Article/Info 2: with quick couplers
• Article number of recommended accessories: 2400581, 2400582
• Manufacturer: METZGER

• Turbocharger Line: Hot Side, Turbocharger to piping
• Connection Diameter (pressure side) [mm]: 61
• Connection Diameter (suction side) [mm]: 61
• Material: Rubber with fabric lining
• Compression ring material: Stainless Steel
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 1K0145838N
• Fitting Position: Outlet
• Weight [g]: 580
• Plug connector manufacturer: HENN
• Length [mm]: 434
• Inner Diameter 1 [mm]: 52
• Inner Diameter 2 [mm]: 52
• Name: IM 221910
• Manufacturer: ORIGINAL IMPERIUM

• Production date to: 12/05
• Fitting Position: Outlet
• for OE number: 1K0145838N
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• Turbocharger Line: Cold Side, Piping to engine block
• Connection Diameter (pressure side) [mm]: 49
• Connection Diameter (suction side) [mm]: 49
• Fitting Position: Right, engine sided
• Compression ring material: Stainless Steel
• Material: Rubber with fabric lining
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Left, Upper
• Supplementary Article/Info 2: with quick couplers
• for OE number: 1K0 145 838 N
• Article number of recommended accessories: 2400581, 2400582
• Manufacturer: METZGER

• Quantity per packing unit: 100
• Shape: O-Ring
• Material: FPM (fluoride rubber)
• Inner Diameter [mm]: 62
• Thickness [mm]: 4.3