Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Diameter [mm]: 19
- Length [mm]: 79
- Net weight [kg]: 0.29
- Engine Code: EZ
-
Vehicle Identification Number (VIN) from: 31-
J- 000 001 - Fitting Position: Front Axle
- Mounting Type: Rubber Mount
- Manufacturer: DELLO AUTOMEGA
- Inner Diameter [mm]: 21
- Outer Diameter [mm]: 36
- Weight [kg]: 0.04
- Required quantity: 2
- Fitting Position: Front Axle both sides
- Manufacturer: TEDGUM
- Quantity per packing unit: 10
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.041
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: at axle link,
Front Axle - Inner Diameter [mm]: 11
- Weight [kg]: 0.016
- Required quantity: 4
- Manufacturer: TEDGUM
- Quantity per packing unit: 10
- Mounting Type: Rubber Mount
- Fitting Position: Front Axle both sides
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: 1F,
EZ - Stabiliser Diameter [mm]: 24
-
Fitting Position: Front Axle Right,
Front Axle Left - Rod/Strut: Coupling Rod
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle Left,
Front Axle Right - for OE number: 357 411 315 A
- Rod/Strut: Push Rod
- Manufacturer: GSP ZAWIESZENIE
- Inner Diameter [mm]: 21
- Fitting Position: Front Axle
- Required quantity: 2
- Weight [kg]: 0.147
- Rod/Strut: Coupling Rod
- Manufacturer: TEDGUM_TD
- Required quantity: 4
- Weight [kg]: 0.015
- Inner Diameter [mm]: 11
- Rod/Strut: for coupling rod
-
Fitting Position: Front Axle both sides,
at axle link - Supplementary Article/Info 2: with grease cap
- Shore-A hardness value, base body: 80
- Colour: red
-
Material: PU
(Polyurethane) - Name: TG 00727116
- Manufacturer: TEDGUM
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Length [mm]: 80
- Manufacturer: KAMOKA
-
Fitting Position: Front Axle,
both sides - Rod/Strut: Coupling Rod
- Manufacturer: DENCKERMANN ZAWIESZENIE
-
Stabiliser Diameter [mm]: 22,
24 - Inner Diameter [mm]: 20
-
External Thread Size: M10 x 1,
5 - Material: Metal
- Rod/Strut: Coupling Rod
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.145
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Stabiliser Diameter [mm]: 24
- Rod/Strut: Coupling Rod
- Width [mm]: 52
- Height [mm]: 25
- Length [mm]: 65
- Manufacturer: DELPHI
- Name: DE TC2037
-
Stabiliser Diameter [mm]: 22,
24 - Inner Diameter [mm]: 20
- Rod/Strut: Coupling Rod
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.206
- Supplementary Article/Supplementary Info: with rubber mounts
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Inner Diameter [mm]: 23
- SVHC: No SVHC present!
- Name: LU 818019210
- Manufacturer: FAG
-
Stabiliser Diameter [mm]: 22,
24 - Inner Diameter [mm]: 20
- Spanner Size: 16
- Rod/Strut: Coupling Rod
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.206
- Supplementary Article/Supplementary Info: with rubber mounts
- Observe service information:
- Name: SW 30 93 8410
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Diameter 4 [mm]: 18
- Fitting Position: Front Axle
- Width [mm]: 48
- Height [mm]: 51
- Weight [kg]: 0.255
- Material: Steel
- Rod/Strut: Coupling Rod
-
Thread Size 1: M10x1,
5 - max. length [mm]: 106
- Name: Stabilizer link left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VW PASSAT 88-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
VW PASSAT 88-
(kvaliteediklass: PJ)"
- Quantity per packing unit: 2
- Fitting Position: Front Axle
- Diameter [mm]: 19
- Rod/Strut: Coupling Rod
- Weight [kg]: 0.188
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Diameter 4 [mm]: 21
- Fitting Position: Front Axle
- Width [mm]: 50
- Height [mm]: 53
- Weight [kg]: 0.24
- Material: Steel
- Rod/Strut: Coupling Rod
-
Thread Size 1: M10x1,
5 - max. length [mm]: 107
- Name: Stabilizer link left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VW PASSAT 88-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
VW PASSAT 88-
(kvaliteediklass: PJ)"
- Fitting Position: Front Axle
- Stabiliser Diameter [mm]: 24
- Rod/Strut: Coupling Rod
- Supplementary Article/Supplementary Info: with accessories
-
Left-/right-hand drive vehicles: for left-
hand/ right- hand drive vehicles - Inner Diameter [mm]: 20
- Manufacturer: LEMFORDER
- Name: LMI 3860601
SVHC: No information available, please contact the manufacturer!
- Diameter 4 [mm]: 18
- Fitting Position: Front Axle
- Width [mm]: 48
- Height [mm]: 54
- Weight [kg]: 0.239
- Material: Steel
- Rod/Strut: Coupling Rod
-
Thread Size 1: M10x1,
5 - max. length [mm]: 107
- Name: Stabilizer link left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VW PASSAT 88-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
VW PASSAT 88-
(kvaliteediklass: PJ)"
- Stabiliser Diameter [mm]: 20
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.3
- Inner Diameter [mm]: 20
- Rod/Strut: Coupling Rod
- Packaging length [cm]: 14.5
- Packaging width [cm]: 9.5
- Packaging height [cm]: 5
- Manufacturer: MONROE
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks