• Vehicle Identification Number (VIN) to: 6N-XY379991
• Fitting Position: Front Axle both sides, inner
• Manufacturer: JP GROUP
• Lisainfo: Wheel bearing, front, inner
• Additional information: Wheel bearing, front, inner

• Vehicle Identification Number (VIN) to: 6N-XY379 991
• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 17.5
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 40
• Height 1 [mm]: 15
• Height 2 [mm]: 14.75
• Lisainfo: Wheel bearing kit, rear, for one wheel
• Additional information: Wheel bearing kit, rear, for one wheel

• Fitting Position: Front Axle Left, Front Axle Right
• Outer Diameter [mm]: 66
• Inner Diameter [mm]: 35
• Width [mm]: 37
• Lisainfo: Wheel bearing, front
• Additional information: Wheel bearing, front

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Height [mm]: 37
• Lisainfo: Wheel bearing kit, for one front wheel
• Additional information: Wheel bearing kit, for one front wheel

• Fitting Position: Front Axle
• Inner Diameter [mm]: 35
• Width [mm]: 37
• Outer Diameter [mm]: 66
• Lisainfo: VW GOLF II, JETTA
• Additional information: VW GOLF II, JETTA

• Vehicle Identification Number (VIN) to: 6N-XY379991
• Inner Diameter [mm]: 40
• Outer Diameter 1 [mm]: 52
• Outer Diameter 2 [mm]: 58
• Height [mm]: 7.5
• Material: NBR (nitrile butadiene rubber)
• Dust Cover: with dust lip
• Fitting Position: Rear Axle both sides
• Manufacturer: TOPRAN
• Lisainfo: 103 514 HP
• Additional information: 103 514 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thickness [mm]: 6.2, 7.5
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 52
• Material: NBR (nitrile butadiene rubber)
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.012
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 6N-XY379991
• Fitting Position: outer, Rear Axle both sides
• Outer Diameter [mm]: 40
• Inner Diameter [mm]: 17.5
• Width [mm]: 15
• Quantity per axle: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle, outer
• Lisainfo: Wheel bearing, front, outer
• Additional information: Wheel bearing, front, outer

• Height [mm]: 14.7
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 50.3
• Fitting Position: Front Axle
• Weight [kg]: 0.11
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Info 2: with wheel hub
• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-VW-000
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Width 1 [mm]: 13.9
• Width 2 [mm]: 14.2
• Outer Diameter 1 [mm]: 39.9
• Outer Diameter 2 [mm]: 50.3
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Name: Wheel bearing kit
• Quality class: PJ

Lisainfo: "Tootja: CX
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Number of Teeth, ABS ring: 43
• Inner Diameter [mm]: 61
• Outer Diameter [mm]: 79.5
• Supplementary Article/Info 2: for wheel bearing/wheel hub
• Width [mm]: 21
• Weight [kg]: 0.039
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Inner Diameter 1 [mm]: 18
• Inner Diameter 2 [mm]: 29
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Rear Axle
• Required quantity: 2
• Parameter: DP2010.10.0085
• Width 1 [mm]: 13.9
• Width 2 [mm]: 14.2
• Outer Diameter 1 [mm]: 39.9
• Outer Diameter 2 [mm]: 50.3
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Manufacturer: DRIVE

• Fitting Position: Rear Axle
• Width 1 [mm]: 15
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 17
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 40
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• for OE number: 191 598 625
• Inner Diameter [mm]: 17.5
• Fitting Position: Rear Axle both sides
• Manufacturer: TRUCKTEC

• Vehicle Identification Number (VIN) to: 6N-XY379 991
• Fitting Position: Rear Axle
• Width [mm]: 15
• Inner Diameter [mm]: 19
• Outer Diameter [mm]: 50
• Bearing Type: Roller Bearing
• Supplementary Article/Info 2: with seal ring
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Width 1 [mm]: 13.9
• Width 2 [mm]: 14.2
• Outer Diameter 1 [mm]: 39.9
• Outer Diameter 2 [mm]: 50.3
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Width [mm]: 14.7
• Inner Diameter [mm]: 17.5
• Outer Diameter [mm]: 39.9
• Width 1 [mm]: 13.8
• Width 2 [mm]: 14.2
• Outer Diameter 1 [mm]: 50.3
• Inner Diameter 1 [mm]: 29
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT

• Vehicle Identification Number (VIN) to: 6N-XY379991
• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Info 2: with grease cap, with crown nut, with shaft seal
• Full Set:
• Quantity per axle: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Width [mm]: 14.6
• Inner Diameter [mm]: 17.46
• Outer Diameter [mm]: 39.88
• Width 2 [mm]: 14.73
• Inner Diameter 2 [mm]: 29
• Outer Diameter 2 [mm]: 50.29
• Net weight [kg]: 0.31
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Vehicle Identification Number (VIN) to: 6N-XY379 991
• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Weight [kg]: 0.234
• Supplementary Article/Info 2: with shaft seal
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Alternative Repair Kit: 100 598 0101, 100 598 0101/SK
• Inner Diameter [mm]: 17.5
• Outer Diameter [mm]: 40
• Height [mm]: 15
• Bearing Type: Tapered Roller Bearing
• Name: RATTALAAGER
• Manufacturer: MEY

• Vehicle Identification Number (VIN) to: 6N-XY379 991
• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Weight [kg]: 0.234
• Supplementary Article/Info 2: with shaft seal
• Name: SW 30 85 0001
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 6N-XY379 991
• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 17.5
• Weight [kg]: 0.254
• Inner Diameter 2 [mm]: 29
• Supplementary Article/Supplementary Info: with attachment material
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 6N-XY379 991
• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with attachment material
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 17.5
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 40
• Height 1 [mm]: 15
• Height 2 [mm]: 14.73
• Bearing Type: Tapered Roller Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Alternative Repair Kit: 100 598 0101, 100 598 0101/SK
• Fitting Position: Rear Axle, inner
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 50
• Height [mm]: 14.73
• Bearing Type: Tapered Roller Bearing
• Name: RATTALAAGER
• Manufacturer: MEY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Trim Level: FRRE LR+RE
• for OE number: 6U0598625
• Inner Diameter [mm]: 13
• Number of bores: 29
• Number of mounting bores: 17
• Width [mm]: 14
• Width 2 [mm]: 39
• Diameter 2 [mm]: 1
• Name: DA KWD1019
• Manufacturer: DAYCO

• Required quantity: 2
• Vehicle Identification Number (VIN) to: 6N-XY379 991
• Supplementary Article/Info 2: with grease cap, with seal ring
• Outer Diameter 1 [mm]: 50
• Inner Diameter 1 [mm]: 29
• Outer Diameter 2 [mm]: 40
• Inner Diameter 2 [mm]: 19
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Net weight [kg]: 0.59
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Supplementary Article/Info 2: without wheel hub
• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Fabrication Number: KLP-VW-002
• Manufacturer: NTY

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle both sides
• Outer Diameter [mm]: 66
• Inner Diameter [mm]: 35
• Width [mm]: 37
• Quantity per axle: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Width 1 [mm]: 14.605
• Width 2 [mm]: 14.732
• Outer Diameter 1 [mm]: 39.878
• Outer Diameter 2 [mm]: 50.292
• Inner Diameter 1 [mm]: 17.462
• Inner Diameter 2 [mm]: 29
• Manufacturer: GSP

• Fitting Position: Rear Axle Left, Rear Axle Right
• Width 1 [mm]: 14.605
• Width 2 [mm]: 14.732
• Outer Diameter 1 [mm]: 39.878
• Outer Diameter 2 [mm]: 50.292
• Inner Diameter 1 [mm]: 17.462
• Inner Diameter 2 [mm]: 29
• Version: Three
• Manufacturer: GSP

• Fitting Position: Front Axle
• Width [mm]: 37
• Outer Diameter [mm]: 66
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Alternative Repair Kit: 100 498 0032, 100 498 0020
• Fitting Position: Front Axle
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Height [mm]: 37
• Bearing Type: Ball Bearing
• Name: RATTALAAGER
• Manufacturer: MEY

• Fitting Position: Front Axle
• Required quantity: 2
• Parameter: DP2010.10.0133
• Width [mm]: 37
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Manufacturer: DRIVE

• Fitting Position: Front Axle Left, Front Axle Right
• Outer Diameter [mm]: 66
• Inner Diameter [mm]: 35
• Width [mm]: 37
• Supplementary Article/Supplementary Info: with attachment material
• Supplementary Article/Info 2: with nut
• Full Set:
• Quantity per axle: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Supplementary Article/Info 2: with retaining ring, with screw, with nut
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT

• Fitting Position: Rear Axle
• Required quantity: 2
• Width 1 [mm]: 13.9
• Width 2 [mm]: 14.2
• Outer Diameter 1 [mm]: 39.9
• Outer Diameter 2 [mm]: 50.3
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Width [mm]: 37
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Left, Front Axle Right
• Width 1 [mm]: 37
• Outer Diameter 1 [mm]: 66
• Inner Diameter 1 [mm]: 35
• Version: One
• Manufacturer: GSP

• Fitting Position: Front Axle Left, Front Axle Right
• Trim Level: FRONT LR+FR
• for OE number: 6N0498625A
• Number of bores: 35
• Width [mm]: 37
• Diameter 2 [mm]: 1
• Name: DA KWD1435
• Manufacturer: DAYCO

• Width [mm]: 37
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.636
• Supplementary Article/Supplementary Info: with attachment material
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-VW-010
• Manufacturer: NTY

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with attachment material
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Height [mm]: 37
• Bearing Type: Ball Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Front Axle
• Required quantity: 2
• Width [mm]: 37
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 66
• Width [mm]: 37
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Right, Left, Front Axle
• Rotation angle [°]: 45
• Tightening Torque [Nm]: 50, 200
• Name: SN R154.40
• Manufacturer: NTN-SNR

• Vehicle Identification Number (VIN) from: 6N-XY379992
• Fitting Position: Rear Axle
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 120
• Braking/Drive Dynamics: for vehicles with ABS
• Weight [kg]: 1.8
• Number of Holes: 4
• Bolt Hole Circle Ø 1 [mm]: 100
• Warranty: 4 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 29SKV012

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 120
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Supplementary Info: with attachment material
• Rim Hole Number: 4
• Manufacturer: JP GROUP
• Lisainfo: Wheel hub with bearing, rear
• Additional information: Wheel hub with bearing, rear

Supplementary Article/Info 2: with integrated wheel bearing, with ABS sensor ring

• Vehicle Identification Number (VIN) from: 6N-XY379992
• Fitting Position: Rear Axle Left, Rear Axle Right
• Rim Hole Number: 4
• Quantity per axle: 2
• Centering Diameter [mm]: 70
• Manufacturer: TOPRAN

Supplementary Article/Info 2: with ABS sensor ring, with grease cap, with nut, Wheel Bearing integrated into wheel hub General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) from: 6N-XY379 992
• Width [mm]: 65
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 120
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 4
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 2.55
• Supplementary Article/Supplementary Info: with attachment material
• Manufacturer: FEBI BILSTEIN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with ABS sensor ring, with wheel hub General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: 6N-XX379992
• Width [mm]: 61.8
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 120
• Manufacturer: OPTIMAL

• Fitting Position: Rear Axle Left, Rear Axle Right
• Trim Level: Ch XY379992>
• Number of bores: 28
• Width [mm]: 64
• Supplementary Article/Info 2: with integrated ABS sensor
• Diameter 2 [mm]: 1
• Name: DA KWD1076
• Manufacturer: DAYCO

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: 6N-XY379992
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 120
• Inner Diameter [mm]: 28
• Width [mm]: 61.5
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Right, Left, Rear Axle
• Number of Holes: 4
• Supplementary Article/Info 2: with rubber mount
• Inner Diameter 1 [mm]: 28
• Width 1 [mm]: 62
• Tightening Torque [Nm]: 175
• Number of pins: 43
• Outer Diameter 1 [mm]: 120
• Name: SN R154.45
• Manufacturer: NTN-SNR