• Fitting Position: Front
• Pump Type: Mono Pump
• Operating Mode: Electric
• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Washer pump for windshield washer, single outlet
• Additional information: Washer pump for windshield washer, single outlet

• Vehicle Equipment: for vehicles with rear window cleaning
• Fitting Position: Front and Rear
• Pump Type: Dual Pump
• Lisainfo: Washer pump
• Additional information: Washer pump

• Supplementary Article/Info 2: for headlamp cleaning system
• Vehicle Identification Number (VIN) from: H-000 001
• Fitting Position: Rear
• Vehicle Identification Number (VIN) to: G-220 000
• Operating Mode: Electric
• Manufacturer: DELLO AUTOMEGA

• Supplementary Article/Info 2: for rear window cleaning
• Fitting Position: Front
• Pump Type: Dual Pump
• Manufacturer: DELLO AUTOMEGA

• Vehicle Equipment: for vehicles with rear window cleaning
• Manufacturer: ASHIKA

• Vehicle Equipment: for vehicles with rear window cleaning
• Manufacturer: JAPKO

• Operating Mode: Electric
• Voltage [V]: 12
• Pressure [bar]: 2
• Pump Type: Dual Pump
• Connector Shape: angular
• Housing Diameter [mm]: 35
• Suction pipe connector diameter [mm]: 7
• Pressure hose connector diameter [mm]: 6
• Lisainfo: Washer pump for windshield washer, double outlet
• Additional information: Washer pump for windshield washer, double outlet

• Vehicle Equipment: for vehicles with rear window cleaning
• Operating Mode: Electric
• Voltage [V]: 12
• Pump Type: Dual Pump
• Suction pipe connector diameter [mm]: 7
• Pressure hose connector diameter [mm]: 6
• Manufacturer: JP GROUP
• Lisainfo: Washer pump for windshield washer, single outlet
• Additional information: Washer pump for windshield washer, single outlet

• Vehicle Identification Number (VIN) from: H-000 001
• Pump Type: Dual Pump
• Supplementary Article/Info 2: for window cleaning system
• Voltage [V]: 12
• Weight [kg]: 0.085
• Required quantity: 1
• Number of connectors: 2
• General Information: windscreen washer pump
• Manufacturer: VIKA

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of pins: 2
• Pump Type: Dual Pump
• Manufacturer: ERA

• Operating Mode: Electric
• Pump Type: Dual Pump
• Required quantity: 1
• for OE number: 90508706
• Manufacturer: MEAT&DORIA

• Quantity: 1
• Vehicle Identification Number (VIN) to: G-220 000
• Vehicle Identification Number (VIN) from: H-000 001
• Pump Type: Mono Pump
• Supplementary Article/Info 2: for window cleaning system
• Voltage [V]: 12
• Weight [kg]: 0.105
• Required quantity: 1
• Number of connectors: 2
• General Information: windscreen washer pump
• Manufacturer: VIKA

• Operating Mode: Electric
• Weight [kg]: 0.078
• Manufacturer: VEMO GERMANY
• Additional information: V20-08-0101 VEMO
• Lisainfo: V20-08-0101 VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pump Type: Dual Pump
• for OE number: 1K6955651
• Manufacturer: MEAT&DORIA

• Voltage [V]: 12
• Fitting Position: Front
• Weight [kg]: 0.08
• Number of connectors: 2
• Supplementary Article/Info 2: for window cleaning system
• Pump Type: Mono Pump
• Manufacturer: METALCAUCHO

• Pump Type: Mono Pump
• Voltage [V]: 12
• Operating Mode: Electric
• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for OE number: 1H6955651
• Manufacturer: MEAT&DORIA

• Voltage [V]: 12
• Number of pins: 2
• Pump Type: Dual Pump
• Connector Shape: rectangular
• Manufacturer: ERA

• Vehicle Equipment: for vehicles with rear window cleaning
• Voltage [V]: 12
• Operating Mode: Electric
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 15SKV015

• Vehicle Equipment: for vehicles with rear windown wiper
• Voltage [V]: 12
• Fitting Position: Vehicle rear window
• Length [mm]: 97
• Width [mm]: 45
• Height [mm]: 44
• Weight [kg]: 0.082
• Operating Mode: Electric
• Pump Type: Dual Pump
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Operating Mode: Electric
• Pump Type: Dual Pump
• Weight [kg]: 0.074
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Weight [kg]: 0.105
• Number of connectors: 2
• Supplementary Article/Info 2: for window cleaning system
• Pump Type: Dual Pump
• Manufacturer: METALCAUCHO

• Manufacturer Restriction: HELLA
• Pump Type: Dual Pump
• Voltage [V]: 12
• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Equipment: for vehicles with rear window cleaning
• Operating Mode: Electric
• Voltage [V]: 12
• Number of pins: 2
• Pump Type: Dual Pump
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Equipment: for vehicles with rear window cleaning
• new version:
• Pump Type: Dual Pump
• Voltage [V]: 12
• Number of connectors: 2
• Weight [kg]: 0.001
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles with rear window cleaning
• new version:
• Pump Type: Dual Pump
• Voltage [V]: 12
• Number of connectors: 2
• Weight [kg]: 0.105
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles with rear window cleaning
• new version:
• Pump Type: Dual Pump
• Voltage [V]: 12
• Number of connectors: 2
• Weight [kg]: 0.105
• Manufacturer: SWAG
• Name: SW 10 92 6259

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 01.1987
• Voltage [V]: 12
• Length [mm]: 61.5
• Width [mm]: 55.4
• Height [mm]: 102
• Weight [kg]: 0.102
• Operating Mode: Electric
• Pump Type: Dual Pump
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Operating Mode: Electric
• Pump Type: Diaphragm Pump
• Weight [kg]: 0.083
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Equipment: for vehicles with rear window cleaning
• Voltage [V]: 12
• Length [mm]: 113
• Width [mm]: 61
• Height [mm]: 55
• Weight [kg]: 0.106
• Operating Mode: Electric
• Pump Type: Dual Pump
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pump Type: Dual Pump
• Number of pins: 2

• Construction Year from: 01.1987
• Pump Type: Dual Pump
• Fitting Position: Front
• Manufacturer: METZGER

• Number of pins: 2
• Pump Type: Mono Pump
• Weight [kg]: 0.17
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 01.1987
• Pump Type: Dual Pump
• Voltage [V]: 12
• Number of connectors: 2
• Weight [kg]: 0.122
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 01.1987
• Pump Type: Dual Pump
• Voltage [V]: 12
• Number of connectors: 2
• Weight [kg]: 0.122
• Manufacturer: SWAG
• Name: SW 40 91 0275

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles with rear window cleaning
• Operating Mode: Electric
• Voltage [V]: 12
• Pressure [bar]: 2
• Flow rate [l/h]: 60
• Pump Type: Dual Pump
• Housing Diameter [mm]: 35
• Suction pipe connector diameter [mm]: 7
• Pressure hose connector diameter [mm]: 6
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA

• Pump Type: Mono Pump
• for OE number: 3B7955681
• Manufacturer: MEAT&DORIA