• Transmission Type: 5-Speed Manual Transmission
• Vehicle Identification Number (VIN) from: 80-L-000 001
• Thread Size: M12x1,5
• Number of pins: 2
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) from: ..F-128 001
• Operating Mode: Electric
• Number of connectors: 2
• Manufacturer: JP GROUP
• Lisainfo: Brake light switch, 2 pins
• Additional information: Brake light switch, 2 pins

• Vehicle Identification Number (VIN) from: 127 904
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Operating Mode: Electric
• Number of pins: 2
• Manufacturer: DELLO AUTOMEGA

• Engine Code: GK
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Operating Mode: Mechanical
• Number of pins: 2
• Name: PIDURITULELšLITI
• Manufacturer: MAX
• Lisainfo: 21-0118
• Additional information: 21-0118

• Lisainfo: Switch for reversing light, 4 speed
• Additional information: Switch for reversing light, 4 speed

• Vehicle Identification Number (VIN) to: ..-F-127 903
• Operating Mode: Hydraulic, Electric
• Number of pins: 2
• Thread Size: M10x1
• Manufacturer: DELLO AUTOMEGA

• Värv: must
• Pistikkontaktide arv: 2
• Kaal (g): 26
• Manufacturer: METALCAUCHO

• Engine Code: GK
• Vehicle Identification Number (VIN) to: 80-K-220 000
• Transmission Type: 4-Speed Manual Transmission
• Block Separation:
• Number of connectors: 2
• Weight [kg]: 0.014
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Number of connectors: 2
• Operating Mode: Electric
• Weight [kg]: 0.021
• for OE number: 191 945 515 B
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: ..F-128 001
• Rakendustüüp: mehhaaniliselt
• Pistikkontaktide arv: 2
• Lüliti funktsioon: avaja
• Värv: must
• Materjal: Plastik
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Number of connectors: 2
• Operating Mode: Electric
• Weight [kg]: 0.021
• for OE number: 191 945 515 B
• Name: SW 32 92 4784
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 191 945 515 B
• Operating Mode: Mechanical
• Number of connectors: 2
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Rakendustüüp: elektriline
• Kaal (kg): 0,021
• vajaminev tükihulk: 1
• Ühenduste arv: 2
• Üldine informatsioon: switch - brake light
• Manufacturer: VIKA

• Number of pins: 2
• Thread Size: M12X1,5
• Manufacturer: MEAT&DORIA

• Operating Mode: Hydraulic
• Combi Switch Function: Normally Open Contact
• Switch pressure from [bar]: 3
• Switch pressure to [bar]: 6
• Lisainfo: Brake light switch, 2 pins
• Additional information: Brake light switch, 2 pins

• Operating Mode: Mechanical
• for OE number: 191945515
• Number of pins: 2
• Manufacturer: MEAT&DORIA

Manufacturer: DELLO AUTOMEGA

• Rakendustüüp: mehhaaniliselt
• Pistikkontaktide arv: 2
• tehnilise informatsiooni number: circuit N.C.
• Manufacturer: ERA

• Operating Mode: Hydraulic
• Thread Size: M10x1.0
• Sensor Type: Open-style sensor
• Name: PIDURITULELšLITI
• Manufacturer: VER

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Housing Colour: black
• Number of connectors: 7
• Colour: red
• Material: Plastic
• Control Type: Flip Switch Control
• Fitting Position: Dashboard
• Weight [kg]: 0.03
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 80-K-060 001
• Number of pins: 10
• Manufacturer: DELLO AUTOMEGA

• Üldine informatsioon: switch for reversing light
• Manufacturer: BORSEHUNG

• Keermemõõt: M12 x 1,5
• Võtmekaugus: 21
• Pistikkontaktide arv: 2
• tehnilise informatsiooni number: circuit N.O.
• Manufacturer: ERA

• Vehicle Identification Number (VIN) from: 80L000001
• Thread Size: M12x1.5
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Operating Mode: Mechanical
• Sensor Type: Closed-type Sensor
• Number of connectors: 2
• Manufacturer: VERNET

• Thread Size: M10x1,0
• Switch Pressure [bar]: 5
• Fitting Position: Footwell
• Operating Mode: Electric
• Spanner Size: 22
• Mounting Type: Bolted
• Number of pins: 2
• Combi Switch Function: Normally Open Contact
• Rated Voltage [V]: 12
• Plug Type: Blade Terminal
• Observe the vehicle manufacturer specifications:
• Weight [kg]: 0.041
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: 80K220000
• Thread Size: M12x1.5
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Colour: black
• Manufacturer: DELLO AUTOMEGA

• Engine Code: GK
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Justeerimine: koos automaatse korrigeerimisega
• Rakendustüüp: mehhaaniliselt
• Name: PIDURITULELšLITI
• Manufacturer: EPS

• Vehicle Identification Number (VIN) to: 80K220000
• Thread Size: M18x1.5
• Sensor Type: Open-style sensor
• Name: LšLITI,TAGURDUSTULI
• Manufacturer: VER

• for OE number: 191 945 515 B
• Operating Mode: Manual, Manual (foot operated), Electric
• Fitting Position: Footwell
• Length [mm]: 94.5
• Width [mm]: 21
• Height [mm]: 25
• Weight [kg]: 0.032
• Required quantity: 1
• Material: Plastic
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• adjustable: adjustable
• Number of pins: 2
• Control Type: Push control
• Combi Switch Function: Normally Closed Contact
• Rated Voltage [V]: 12
• Housing Colour: black
• Connector Shape: angular
• Observe the vehicle manufacturer specifications:
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M12x1,5
• Manufacturer: FAE

• Rakendustüüp: elektriline
• Üldine informatsioon: switch - brake light
• Manufacturer: BORSEHUNG

• Engine Code: GK
• Vehicle Identification Number (VIN) to: 80-K-220000
• Transmission Type: 4-Speed Manual Transmission
• Keermemõõt: M18x1,5
• Võtmekaugus: 22
• Name: EP 1.860.010
• Manufacturer: EPS

• Pinge [V]: 12
• Rakendustüüp: elektriline
• Pistikkontaktide arv: 10
• Kaal (kg): 0,08
• Garantii: 3 aastat garantii
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY

• Engine Code: GK
• Brake System: Hydraulic
• Keermemõõt: M10x1
• Võtmekaugus: 22
• Rakendustüüp: hüdrauliline, mehhaaniliselt
• Name: EP 1.810.102
• Manufacturer: EPS

• Üldine informatsioon: switch for reversing light
• Manufacturer: BORSEHUNG

• Vehicle Identification Number (VIN) from: 80L000001
• Thread Size: M18x1.5
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Operating Mode: Electric-hydraulic
• Combi Switch Function: Normally Open Contact
• Thread Size: M10 x 1
• Observe the vehicle manufacturer specifications:
• Number of pins: 2
• Name: PIDURITULELšLITI
• Manufacturer: MEY
• Lisainfo: 1008900009
• Additional information: 1008900009

• Vehicle Identification Number (VIN) to: ..-F-127903
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Required quantity: 1
• Rakendustüüp: elektriline-hüdrauliline
• Pistikkontaktide arv: 2
• Pistikute teostus: Lamepistik
• Montaaživiis: Kruviühendus
• Pikkus (mm): 46
• Keermemõõt: M10x1 konisch
• Keermepikkus (mm): 9
• Võtmelaius 1 [mm]: 24
• Manufacturer: ATE

• Engine Code: GK
• Vehicle Identification Number (VIN) from: 80-L-000001
• Transmission Type: 5-Speed Manual Transmission
• Keermemõõt: M12x1,5
• Võtmekaugus: 21
• Name: EP 1.860.125
• Manufacturer: EPS

• Required quantity: 1
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Värv: must
• Rakendustüüp: Kallutamine
• Pistikkontaktide arv: 7
• Materjal: Plastik
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Equipment: for vehicles without cruise control
• Voltage [V]: 12
• Colour: black
• Material: Plastic
• for OE number: 321 953 513
• Number of pins: 7
• Name: TULEDE/KOJAMEESTE KANGILšLITI
• Manufacturer: MAX

Combi Switch Function: with indicator function, with high beam function, with park light function

• Pistikkontaktide arv: 4
• Lüliti funktsioon: koos suuna-funktsiooniga, kaugtuli funktsiooniga
• Kaal (kg): 0,094
• Manufacturer: ERA

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• for OE number: 161 953 235 B
• Colour: black
• Material: Plastic
• Mounting Type: Clipped
• Number of pins: 7
• Control Type: Flip Switch Control
• Weight [kg]: 0.028
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Colour: black
• Number of pins: 8
• Weight [kg]: 0.2
• Manufacturer: VEMO GERMANY

Combi Switch Function: with rear wipe-wash function, with wipe-wash function, with wipe interval function General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pistikkontaktide arv: 12
• Kaal (kg): 0,102
• Manufacturer: ERA

Lüliti funktsioon: koos taga-pesu-puhastus-funktsioon, koos pühkimis-pesu-funktsiooniga, koos pühkimisintervall-funktsiooniga

• Number of pins: 12
• for OE number: 331953519A01C
• Name: Tulede/kojameeste kangilliti
• Manufacturer: MD

Combi Switch Function: with wipe-wash function, with rear wipe-wash function, with wipe interval function

• Värv: must
• Pistikkontaktide arv: 8
• Rakendustüüp: Kallutamine
• Materjal: Plastik
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Identification Number (VIN) from: 80-K-060 001
• Colour: black
• Number of pins: 10
• Manufacturer: MEYLE

• Kaal (kg): 0,096
• Värv: must
• Ühenduste arv: 7
• Värvikood: 01 C
• Üldine informatsioon: steering column switch
• Manufacturer: BORSEHUNG

Lüliti funktsioon: koos suuna-funktsiooniga, Parktuli funktsiooniga, koos tuleümberlülitus-funktsioon

• Operating Mode: Hydraulic
• Voltage [V]: 12
• Switch Pressure [bar]: 5
• Thread Size: M10x1
• Spanner Size: 22
• Number of pins: 2
• Combi Switch Function: Normally Open Contact
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA

• Combi Switch Function: with indicator function, with high beam function
• Number of pins: 13
• Light Function: with cornering light
• Name: Tulede/kojameeste kangilliti
• Manufacturer: MD

• Pistikkontaktide arv: 13
• Manufacturer: ERA

Lüliti funktsioon: koos suuna-funktsiooniga, ohutulede süsteemi funktsiooniga, kaugtuli funktsiooniga

• Colour: black
• Weight [kg]: 0.13
• Manufacturer: VEMO GERMANY

Combi Switch Function: with hazard warning light function, with light dimmer function, with indicator function, with high beam function General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mounting Type: Bolted
• Voltage [V]: 12
• Number of pins: 2
• Combi Switch Function: Normally Open Contact
• Thread Size: M18x1,5
• Operating Mode: Electric
• Spanner Size: 22
• Plug Type: Blade Terminal
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

• Voltage [V]: 12
• Colour: black
• Material: Plastic
• for OE number: 357 953 513 F
• Number of pins: 13
• Name: TULEDE/KOJAMEESTE KANGILšLITI
• Manufacturer: MAX

Combi Switch Function: with indicator function, with hazard warning light function, with high beam function

• Vehicle Identification Number (VIN) from: 80-L-000001
• Cable insulation material: Silicone
• Cable Length [mm]: 500
• Manufacturer Restriction: VAG
• Number of pins: 2
• Cable Cross Section [mm²]: 1
• Contact surface: Tin-plated
• Socket Width [mm]: 2.8
• Supplementary Article/Supplementary Info: with socket housing, with seal
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, numbrivalgustus
• Manufacturer: HBE

• Voltage [V]: 12
• Number of connectors: 13
• Colour: black
• Material: Plastic
• Weight [kg]: 0.2
• Manufacturer: FEBI BILSTEIN

Combi Switch Function: with indicator function, with hazard warning light function, with high beam function, with park light function, with headlight flasher General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: GK
• Construction Year to: 12.1986
• Vehicle Identification Number (VIN) to: -G-222 000
• Värv: must
• Pistikkontaktide arv: 11
• Manufacturer: AIC

Lüliti funktsioon: koos suuna-funktsiooniga, koos pühkimis-pesu-funktsiooniga, koos taga-pesu-puhastus-funktsioon Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: GK
• Värv: must
• Pistikkontaktide arv: 8
• Manufacturer: AIC

Lüliti funktsioon: koos suuna-funktsiooniga, koos pühkimis-pesu-funktsiooniga, koos taga-pesu-puhastus-funktsioon Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Required quantity: 1
• Engine Code: GK
• Värv: must
• Pistikkontaktide arv: 13
• Manufacturer: AIC

Lüliti funktsioon: koos suuna-funktsiooniga, koos valgussignaaliga, ohutulede süsteemi funktsiooniga Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.