Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
Lisainfo: "Tootja: TEKNOROT
VW TRANSPOR.T4 9/90-
(kvaliteediklass: PJ)"
- for model code: Caravelle
-
Fitting Position: outer,
Front Axle -
for OE number: 701 407 361,
701 407 361 b - Required quantity: 2
- Diameter [mm]: 25
- Lisainfo: VW TRANSPORTER T4
- Additional information: VW TRANSPORTER T4
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 19
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 20 tk
- Additional information: PAKENDIS 20 tk
-
Fitting Position: Front,
outer - Diameter [mm]: 23.1
-
Name: Paigutus -
Kndmik VW P. T4 - Manufacturer: MAX
-
Fitting Position: Front Axle both sides,
outer - Material: Rubber
- Inner Diameter [mm]: 19
- Manufacturer: MERTZ
-
Fitting Position: Front Axle Left,
Front Axle Right, inner - Inner Diameter [mm]: 23
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.066
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 23
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Stabiliser Bar Diameter [mm]: 23
- Observe service information:
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 24
-
Name: Paigutus -
Kndmik VW P. T4 WEW. 90- 03 - Manufacturer: MAX
- Fitting Position: Front Axle Left
- Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 23.5
- Shape: slotted
- Quantity per axle: 2
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 16
- Manufacturer: 3RG
- Mounting Type: Rubber Mount
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.055
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Diameter 4 [mm]: 22.6
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 23.1
- Manufacturer: 3RG
- Diameter [mm]: 22.6
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.07
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle,
outer - Diameter [mm]: 23.5
- Inner Diameter 1 [mm]: 19.5
- Outer Diameter 1 [mm]: 35
- Thickness 1 [mm]: 28.5
- Manufacturer: DELPHI
- Construction Year to: 04.2002
- for model code: Campmobile
- Quality: OE Performance
- Fitting Position: Front
- Colour: silver
- Weight [g]: 24
- Manufacturer: GATES PASKI PRZEWODY
- for PR number: 0AB
-
Fitting Position: Front Axle Left,
Front Axle Right - Height [mm]: 29
- Inner Diameter [mm]: 19
- Outer Diameter [mm]: 40
-
Name: Paigutus -
Kndmik VW P. T4 - Manufacturer: MEY
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 23
- SVHC: No SVHC present!
- Manufacturer: FAG
-
Fitting Position: Right,
Left - Required quantity: 2
- Manufacturer: CORTECO
-
Fitting Position: Front Axle,
outer - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 19
- SVHC: No SVHC present!
- Manufacturer: FAG
- Fitting Position: Front Axle both sides
- Required quantity: 2
- paired article number: VKDS 351032
- Height [mm]: 30
- Inner Diameter [mm]: 17.5
- Outer Diameter [mm]: 38.8
- Name: SK VKDS351032
- Manufacturer: SKF
- Diameter 4 [mm]: 22.6
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Stabilizer mount left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VWTRANSPORT.(T4),90-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
VWTRANSPORT.(T4),90-
(kvaliteediklass: PJ)"
-
Vehicle Identification Number (VIN) to: 70-
T- 200 000 - for PR number: 0AB
-
Fitting Position: inner,
Front Axle Left, Front Axle Right - Inner Diameter [mm]: 23
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW P. T4 WEW. 90- 03 - Manufacturer: MEY
-
Fitting Position: Front Axle Left,
Front Axle Right, inner - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 23
-
Warranty: 3 years warranty or until 75,
000km - Manufacturer: METZGER
- for PR number: 0AC
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 27
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Front Axle both sides
- Manufacturer: JP GROUP
-
Lisainfo: Bush,
stabilizer -
Additional information: Bush,
stabilizer
- for OE number: 701411041D
- Fitting Position: Front
- Weight [g]: 25
- Name: IM 32339
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: Front Axle Right,
Front Axle Left - Inner Diameter [mm]: 24
-
Name: Puks -
Kndmik VW P. T4 - Manufacturer: MAX
-
Vehicle Identification Number (VIN) from: 70-
T- 199999 -
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 19
-
Warranty: 3 years warranty or until 75,
000km - Manufacturer: METZGER
- Stabiliser Bar Diameter [mm]: 24
- Inner Diameter [mm]: 23
- Fitting Position: Front Axle
- Weight [kg]: 0.03
-
Name: Paigutus -
Kndmik VW P. T4 WEW. 90- 03 - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: 70-
T- 200 001 - for PR number: 0AB
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 23
- Outer Diameter [mm]: 34
- Stabiliser Bar Diameter [mm]: 24
- Height [mm]: 38
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW P. T4 WEW. 90- 03 23, 5MM - Manufacturer: MEY
- Stabiliser Bar Diameter [mm]: 24
- Inner Diameter [mm]: 23
- Fitting Position: Front Axle
- Weight [kg]: 0.03
- Manufacturer: SWAG
- Name: SW 30 93 1354
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Stabiliser Bar Diameter [mm]: 23
- Inner Diameter [mm]: 24
- Required quantity: 2
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.08
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: 3RG
- Required quantity: 4
- Fitting Position: Rear Axle
-
Name: Paigutus -
Kndmik VW T. T4 - Manufacturer: TED
- Fitting Position: Front Axle both sides
- Required quantity: 2
- Stabiliser Bar Diameter [mm]: 27
- paired article number: VKDS 351017
- Name: SK VKDS351017
- Manufacturer: SKF
-
Vehicle Identification Number (VIN) to: 70-
3- 250 000 - Suspension: for vehicles with reinforced stabiliser bar
- Stabiliser Bar Diameter [mm]: 27
- for PR number: 0AC
- Width [mm]: 30
- Thickness [mm]: 35
- Inner Diameter [mm]: 27
- Colour: white
- Fitting Position: Front Axle
- Weight [kg]: 0.2
-
Name: Paigutus -
Kndmik VW P. T4 WEW. 90- 03 - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) to: 70-
3- 250 000 - Suspension: for vehicles with reinforced stabiliser bar
- Stabiliser Bar Diameter [mm]: 27
- for PR number: 0AC
- Width [mm]: 30
- Thickness [mm]: 35
- Inner Diameter [mm]: 27
- Colour: white
- Fitting Position: Front Axle
- Weight [kg]: 0.2
- Manufacturer: SWAG
- Name: SW 32 92 3424
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
for PR number: 0AC,
0J4, F5H -
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 27
- Stabiliser Bar Diameter [mm]: 27
- Required quantity: 2
- Manufacturer: MEY
Name: Paigutus - Kndmik VW P. T4 WEW. 90-03 27MM (WZMOC. )
-
Fitting Position: outer,
inner, Rear Axle -
Material: PU
(Polyurethane) - Required quantity: 4
- Supplementary Article/Info 2: with grease cap
-
Name: Paigutus -
Kndmik VW T. T4 91 !!!POLIURETAN!!! - Manufacturer: TED
-
Fitting Position: Front Axle both sides,
outer - Quantity per axle: 2
-
Name: Paigutus -
Kndmik VW P. T4 - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!