• Number of pins: 4
• Colour: black
• Colour Coding: green
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 4 pins
• Additional information: Temperature sensor for cooling system, 4 pins

• Number of pins: 2
• Housing Colour: black
• Connector Shape: angular
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Construction Year to: 07.1994
• Number of pins: 4
• Switch Point [°C]: 108, 112
• Colour Coding: brown
• Temperature range from [°C]: 108
• Temperature range to [°C]: 119
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Construction Year from: 05.1998
• Vehicle Identification Number (VIN) to: F 70-X-053 924
• Number of pins: 4
• Switch Point [°C]: 100, 95
• Colour: black, blue
• Manufacturer: JP GROUP
• Lisainfo: Thermo switch for cooling system, 100/95 C
• Additional information: Thermo switch for cooling system, 100/95 C

• Number of pins: 4
• Switch Point [°C]: 88, 93
• Colour: blue, white
• Lisainfo: Thermo switch for cooling system, 93/88 C
• Additional information: Thermo switch for cooling system, 93/88 C

• Inner Diameter [mm]: 19.5
• Thickness [mm]: 3.5
• Material: Rubber
• for OE number: 7198663
• Manufacturer: DELLO AUTOMEGA

• Inner Diameter [mm]: 19.5
• Thickness [mm]: 3.5
• Weight [kg]: 0.001
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• General Information: temperature sensor
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) to: 70-3-250 000, 70-4-099 000
• Vehicle Identification Number (VIN) from: 70-3-000 001, 70-4-000 001
• Number of pins: 4
• Diameter [mm]: 20
• Colour: black/green
• Manufacturer: DELLO AUTOMEGA

• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Number of pins: 2
• Colour Coding: black/green
• Manufacturer: TOPRAN HANS PRIES
• Lisainfo: 103 327 HP
• Additional information: 103 327 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Colour Coding: black/green
• Connector Shape: rectangular
• Number of pins: 2
• Outer Diameter [mm]: 20
• for OE number: 1669949
• Manufacturer: DELLO AUTOMEGA

• Housing Colour: red
• Manufacturer: KAMOKA

• Vehicle Equipment: for vehicles with parking heater
• Colour Coding: red
• Number of pins: 2
• Temperature range from [°C]: 55
• Temperature range to [°C]: 65
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Length [mm]: 20
• Colour: black
• Colour Coding: green
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Construction Year from: 05.1998
• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Number of pins: 4
• Colour Coding: black/green
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Length [mm]: 20
• Number of connectors: 4
• Colour: black
• Colour Coding: green
• Weight [kg]: 0.25
• Name: SW 32 92 2882
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Colour: green
• Colour Coding: green
• Length [mm]: 20
• Weight [kg]: 0.25
• Required quantity: 1
• Number of connectors: 4
• General Information: temperature sensor; green
• Manufacturer: VIKA

• Length [mm]: 20
• Number of connectors: 4
• Colour: black
• Colour Coding: green
• Weight [kg]: 0.25
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Switch Point [°C]: 55, 65
• Supplementary Article/Info 2: with seal ring
• Housing Colour: brown
• Switch point from [°C]: 65
• Switch point to [°C]: 55
• Weight [kg]: 0.027
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Colour Coding: green
• Weight [kg]: 0.02
• Required quantity: 1
• Number of connectors: 2
• General Information: temperature sensor
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) from: 70-R-000 001*
• Switch-on point [°C]: 84
• Shut-off Point [°C]: 77
• Number of pins: 3
• Thread Size: M22X1,5
• Manufacturer: DELLO AUTOMEGA

• Operating voltage [V]: 12
• Switch point from [°C]: 76, 82
• Switch point to [°C]: 87, 93
• Spanner Size: 29
• Supplementary Article/Info 2: with seal ring
• Thread Size: M22 x 1,5
• Number of pins: 3
• Manufacturer: JP GROUP
• Lisainfo: Thermo switch for fan 87-76/93-82 C
• Additional information: Thermo switch for fan 87-76/93-82 C

• for OE number: 7210731
• Manufacturer: KAMOKA

• Construction Year to: 12.1998
• Diameter [mm]: 26
• Length [mm]: 35
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• for OE number: 251 919 501 D
• Housing Colour: black
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 70-3-000 001, 70-4-000 001
• Vehicle Identification Number (VIN) to: 70-X-053 924, 70-3-250 000, 70-4-099 000
• Number of pins: 4
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 4
• Switch Point [°C]: 105, 112
• Manufacturer: JP GROUP
• Lisainfo: Thermo switch for cooling system, 105/112 C
• Additional information: Thermo switch for cooling system, 105/112 C

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• for OE number: 251919501A
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Required quantity: 1
• Trim Level: Standheizung
• Number of pins: 2
• Switch Point [°C]: 55, 65
• Colour: red
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Diameter [mm]: 20
• Number of pins: 2
• Manufacturer: ERA

• Colour: green
• Plug Type ID: 4
• Weight [kg]: 0.02
• Required quantity: 1
• Outer Diameter [mm]: 20
• Number of connectors: 4
• General Information: temperature sensor; green; 4 pins
• Manufacturer: VIKA

• Construction Year to: 12.1998
• Sensor Type: NTC Sensor
• Colour: black
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Construction Year to: 07.1994
• Temperature range from [°C]: 108
• Temperature range to [°C]: 119
• Connector Shape: rectangular
• Number of pins: 4
• Fitted Diameter [mm]: 20
• Switch Point [°C]: 108, 112
• Colour Coding: brown
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 01.2003
• for model code: Transporter
• Connector Shape: rectangular
• Material: Brass
• Number of pins: 2
• Plug Type: Male
• Sensor Type: NTC Sensor
• Spanner Size: 20 mm
• Thread Size: not have

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Engine Code: ABL
• Vehicle Identification Number (VIN) to: 70-P-250000
• Thread Size: M22 x 1,5
• Spanner Size: 29
• Name: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Manufacturer: MAX

• Spanner Size: 29
• for OE number: 701 959 481 J
• Manufacturer: KAMOKA

• Construction Year from: 08.1993
• Connector Shape: angular
• Thread Size: M 22 x 1,5
• Number of pins: 3
• Switch-on point [°C]: 83, 93
• Shut-off Point [°C]: 82, 76
• Spanner Size: 29
• Number of switch stages: 2
• Housing Colour: black
• Name: W¤CZNIK WENTYLATORA VAG
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 4
• Temperature range from [°C]: 89
• Temperature range to [°C]: 97
• for OE number: 1669990
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Diameter [mm]: 20
• Number of pins: 4
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAX

• for OE number: 357 919 501
• Weight [kg]: 0.025
• Supplementary Article/Supplementary Info: with seal
• Colour Coding: green
• Number of pins: 4
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Spanner Size: 29
• for OE number: 701959481C
• Manufacturer: KAMOKA

• Operating temperature from [°C]: 112
• Operating temperature to [°C]: 120
• Thread Size: 20 mm
• Name: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Manufacturer: VER

• Model Year from: 1999
• Sensor Type: NTC Sensor
• Spanner Size: 20
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Colour Coding: white/blue
• Connector Shape: rectangular
• Temperature range to [°C]: 93
• Temperature range from [°C]: 88
• Number of pins: 4
• Fitted Diameter [mm]: 20
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Spanner Size: 29
• for OE number: 1341005
• Manufacturer: KAMOKA

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 4
• Socket colour: black
• for OE number: 357919501
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Housing Colour: blue
• for OE number: 701919369C
• Manufacturer: KAMOKA

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: D Shape
• Number of pins: 4
• Socket colour: brown
• for OE number: 074919501
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Vehicle Identification Number (VIN) from: 70R000001
• Number of pins: 3
• Connector Shape: angular
• Socket colour: black
• Shut-off Point [°C]: 87, 82
• Switch Point [°C]: 77, 92
• Thread Size: M22x1,5 mm
• Spanner Size: 29 mm
• for OE number: 701 959 481
• Manufacturer: MEAT&DORIA

• Switch Point [°C]: 106, 102
• Connector Shape: rectangular
• Colour Coding: green
• Number of pins: 4
• Fitted Diameter [mm]: 20
• Temperature range from [°C]: 102
• Temperature range to [°C]: 112
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: ABL
• Number of pins: 2
• Colour: black
• Manufacturer: EPS

• Switch Point [°C]: 107, 112
• Thread Size: 20 mm
• Manufacturer: VERNET

• Operating temperature from [°C]: 87, 93
• Operating temperature to [°C]: 76, 82
• Thread Size: M22x1.5
• Sensor Type: Open-style sensor
• Name: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Manufacturer: VER

• Number of pins: 4
• Temperature range to [°C]: 100
• Manufacturer: ERA

• Supplementary Article/Supplementary Info: with seal
• Colour: black
• Thread Size: M22x1,5
• Number of pins: 3
• General Information: thermal switch
• Manufacturer: VIKA

• Number of pins: 4
• Temperature range to [°C]: 95
• Manufacturer: ERA

• Weight [kg]: 0.017
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Colour: black
• Plug Type ID: 3 polig
• Thread Size: M22x1,5
• Switch Point [°C]: 77, 92
• General Information: thermal switch
• Manufacturer: VIKA

• Thread Size: M22x1.5
• Number of pins: 4
• Switch point from [°C]: 120
• Switch point to [°C]: 112
• Manufacturer: ERA

• Housing Colour: black
• Number of pins: 4
• Colour Coding: black, blue
• Switch point from [°C]: 100
• Switch point to [°C]: 95
• Weight [kg]: 0.028
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Model Year to: 1995
• Vehicle Identification Number (VIN) to: 70-P-250 000
• Number of pins: 3
• Thread Size: M22x1,5
• Switch Point [°C]: 77, 92
• Colour: black
• Switch point from [°C]: 92
• Switch point to [°C]: 77
• Weight [kg]: 0.052
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Plug Type ID: 4 polig
• Thread Size: M20x1,5
• General Information: temperature sensor
• Manufacturer: VIKA

• Operating temperature from [°C]: 87, 93
• Operating temperature to [°C]: 79, 85
• Thread Size: M22x1.5
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Climate Zones: for hot climate zones
• Block Separation:
• Vehicle Equipment: for vehicles with trailer hitch
• Thread Size: M22x1,5
• Spanner Size: 29
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Switch point from [°C]: 87
• Switch point to [°C]: 75
• Weight [kg]: 0.075
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 08.1993
• Vehicle Identification Number (VIN) to: 70-P-250-000
• for model code: 3 Pin
• Thread Size: M22*1.5
• Spanner Size: S29
• Number of pins: 3
• Connector Shape: rectangular
• Manufacturer: DELPHI
• Name: DE TS10299

• Vehicle Identification Number (VIN) to: 70-P-250 000
• Construction Year to: 07.1993
• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thread Size: M22 x 1,5
• Spanner Size: 29
• Number of pins: 3
• Switch point from [°C]: 87, 92
• Switch point to [°C]: 77, 82
• Manufacturer: ERA

• Thread Size: M22 x 1,5
• Spanner Size: 29
• Number of pins: 3
• Switch point from [°C]: 87, 93
• Switch point to [°C]: 76, 82
• Manufacturer: ERA

• Operating temperature from [°C]: 80, 87
• Operating temperature to [°C]: 75, 82
• Thread Size: M22x1.5
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Switch point from [°C]: 87
• Switch point to [°C]: 76
• Manufacturer: FAE

• Outer Diameter [mm]: 20
• Weight [kg]: 0.02
• Number of connectors: 4
• Colour: green
• Required quantity: 1
• General Information: coolant temperature sensor
• Manufacturer: BORSEHUNG

• Housing Colour: brown
• Number of pins: 4
• Spanner Size: 0
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Sensor Type: NTC Sensor
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY
• Lisainfo: 1008100007
• Additional information: 1008100007

• Sensor Type: NTC Sensor
• Mounting Type: Clipped
• Connector Shape: rectangular
• Number of pins: 4
• Socket colour: black
• for OE number: 1097757
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Thread Size: M22*1.5
• Spanner Size: S29
• Number of pins: 3
• Connector Shape: rectangular
• Name: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Manufacturer: DLP

• Sensor Type: NTC Sensor
• Colour: brown
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: without seal ring
• Colour: blue, white
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Switch point from [°C]: 87
• Switch point to [°C]: 77
• Manufacturer: FAE