Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: APL
- Construction Year from: 05.1999
- Construction Year to: 12.1999
- Transmission Type: Manual Transmission
- for OE number: 023906262
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
-
Cable Length [mm]: 1,
250 - Number of pins: 4
- Weight [g]: 160
- Gross Weight [g]: 193
-
Name: DN DOX-
2012 - Manufacturer: DENSO
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
PASSAT VARIANT (3B5)
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
PASSAT VARIANT (3B5)
(kvaliteediklass: Q)"
- Engine Code: AET
-
Overall Length [mm]: 1,
040 - Number of pins: 4
- Lambda Sensor: Heated
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
- Engine Code: AET
-
Lambda Sensor: Regulating Probe,
Heated - Fitting Position: before catalytic converter
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Engine Code: APL,
AVT - Construction Year from: 05.1999
-
Lambda Sensor: Diagnostic Probe,
Heated - Fitting Position: after catalytic converter
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Lisainfo: MGS-
615 -
Additional information: MGS-
615
- Resistor [Ohm]: 2.1
- Conductor Number: 4
- Length [mm]: 885
- Number of circuits: 4
- Cable Length [mm]: 885
- Lambda Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
- Lambda Sensor: Lambda Sensor
-
Cable Length [mm]: 1,
750 - Number of circuits: 4
- Manufacturer: ERA
- Lambda Sensor: Regulating Probe
- Voltage [V]: 12
- Length [mm]: 885
- Number of circuits: 4
- Weight [kg]: 0.19
- Resistor [Ohm]: 2.1
- Operating Mode: Electric
- Warranty: 3 years warranty
- Name: CE 09SKV599
- Manufacturer: ESEN SKV
-
Lambda Sensor: Regulating Probe,
Finger probe, Heated - Engine Code: AET
- Cable Length [mm]: 885
- Manufacturer: DELPHI
-
Name: DE ES10967-
12B1
- Construction Year from: 05.1999
- Lambda Sensor: Unheated
- Number of pins: 4
-
Cable Length [mm]: 1,
050 - Quality: OE EQUIVALENT
- Manufacturer: MEAT&DORIA
- Resistor [Ohm]: 9
- Number of circuits: 4
-
Length [mm]: 1,
731 - Conductor Number: 4
-
Cable Length [mm]: 1,
731 - Lambda Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
- Engine Code: AET
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
-
Engine Code: APL,
AVT - Construction Year from: 05.1999
- Lambda Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Engine Code: APL
- Construction Year from: 05.1999
- Construction Year to: 12.1999
- Transmission Type: Manual Transmission
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
-
Name: DN DOX-
0150 - Quality class: Q
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Engine Code: AET
- Lambda Sensor: Finger probe
-
Thread Size: M18 x 1,
5 - Cable Length [mm]: 950
- Number of pins: 4
- Name: Lambda andur
- Manufacturer: MEY
-
Lambda Sensor: Diagnostic Probe,
Regulating Probe - Fitting Position: after catalytic converter
-
Engine Code: APL,
AVT - Vehicle type: Multivan
-
Cable Length [mm]: 1,
750 - Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PA358066391
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Engine Code: AET
- Lambda Sensor: Regulating Probe
-
Length [mm]: 1,
000 - Number of pins: 4
- Technical Information Number: Universal 77008
- Fitting Position: before catalytic converter
- Manufacturer: FAE
- Engine Code: AET
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 4
- Overall Length [mm]: 910
- Available as universal article as well, see article no.: 0258986503
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Lambda Sensor: Heated
- Number of pins: 4
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Construction Year from: 05.1999
-
Engine Code: APL,
AVT -
Lambda Sensor: Planar probe,
Thread pre- greased, Heated - Number of pins: 4
-
Cable Length [mm]: 1,
800 -
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Weight [kg]: 0.23
- Name: VA 368003
- Manufacturer: VALEO
Fitting Position: before catalytic converter, after catalytic converter
- Lambda Sensor: Lambda Sensor
- Voltage [V]: 12
- Colour: red
- Number of circuits: 5
- Weight [kg]: 0.15
- Operating Mode: Electric
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 09SKV905
-
Engine Code: APL,
AVT - Construction Year from: 05.1999
-
Lambda Sensor: Regulating Probe,
Unheated - Fitting Position: Exhaust Manifold
- Number of pins: 5
- Cable Length [mm]: 600
- for OE number: 1K0 998 262 H
- for article number: 81528E
- Quality: OE EQUIVALENT
- Manufacturer: MEAT&DORIA
- Construction Year from: 05.1999
-
Engine Code: APL,
AVT - Lambda Sensor: Lambda Sensor
- Voltage [V]: 12
-
Length [mm]: 1,
510 - Number of circuits: 5
- Weight [kg]: 0.22
- Operating Mode: Electric
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 09SKV852
- Lambda Sensor: Lambda Sensor
- Voltage [V]: 12
- Length [mm]: 520
- Number of circuits: 5
- Weight [kg]: 0.15
- Operating Mode: Electric
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
-
Lambda Sensor: Regulating Probe,
Lambda Sensor - Construction Year from: 05.1999
-
Engine Code: APL,
AVT - Voltage [V]: 12
- Length [mm]: 630
- Number of circuits: 5
- Weight [kg]: 0.16
- Operating Mode: Electric
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 09SKV858
- Construction Year from: 05.1999
-
Engine Code: APL,
AVT - Lambda Sensor: Lambda Sensor
- Voltage [V]: 12
-
Length [mm]: 1,
470 - Number of circuits: 5
- Weight [kg]: 0.22
- Operating Mode: Electric
- Warranty: 3 years warranty
- Name: CE 09SKV860
- Manufacturer: ESEN SKV
- Lambda Sensor: Lambda Sensor
- Weight [kg]: 0.15
- Warranty: 3 years warranty
- Technical Information: Universal
- Name: CE 09SKV915
- Manufacturer: ESEN SKV
- Construction Year from: 05.1999
- Number of pins: 4
- Connector Shape: D Shape
-
Cable Length [mm]: 1,
360 -
Lambda Sensor: Regulating Probe,
Broadband lambda sensor - Fitting Position: Exhaust Manifold
- for article number: 81519
- Manufacturer: MEAT&DORIA
-
Engine Code: APL,
AVT - Construction Year from: 05.1999
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 5
- Overall Length [mm]: 650
-
Recommended change interval [km]: 160,
000 - Manufacturer: BOSCH
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks